Find experienced local carpenters in West Brisbane

I am seeking a qualified and experienced contractor or renovation specialist for a comprehensive home update. The project involves multiple areas of the basement/ ground floor and requires a good eye for detail and quality workmanship.

I’ve started installing an IKEA METOD walk-in pantry and need an experienced installer to finish it. The METOD wall rails are already fitted and several tall and base cabinets are assembled and sitting in place, but nothing has been fully joined, levelled or secured yet. The IKEA design print-out for the final layout will be on site. Tasks required: - Align, level and join all cabinets together - Secure cabinets properly to the existing METOD rails and walls - Cut and fit cover/end panels to size and install where needed - Install internal fittings: shelves, drawers and cupboard doors - Cut benchtop to size, install it on the base cabinets and apply silicone where the benchtop meets the wall - Fit plinths What’s provided on site: - All IKEA METOD cabinets, cover panels, shelves, drawers, doors, rails and fittings (cabinets are assembled, drawers are not) - Benchtop - Saw horses if needed Tasker to provide: - All necessary tools for cutting, drilling and fixing cabinets and benchtop - Experience with IKEA kitchen/METOD installs preferred

A timber line all along the balcony edge got rotten and need to be replaced because the aluminium protection is detached from the balcony

Need my stairs and hand rails sanded down and restained with a similar colour to the timber floor next to it. Please provide stain and all required products for the job. Stairs are not timber but about 3mm thick vineer so please take extra care when sanding. Require an oil based stain.

Hi Taskers, I have recently built a project house in Graceville and I have on sold the property and the new purchaser wants to replace the existing glass door with a solid timber door. The door size is 2340 x 1020 and I want to fix it in the existing aluminium frame rather than replace the whole frame. I will supply the door but need it installed along with locks and hinges. Keen to work through with the tasker on what hinges and locks to use. Price offered is an estimate and I am happy to discuss the rate with the tasker who gets the job. Tasker will need to be a qualified carpenter or handyman with experience in this type of work. Thanks Ben

Hi there, I’m looking for an experienced handyman or cabinetmaker to remove a single kitchen cabinet carcass so I can install a dishwasher. The doors and shelves are already removed. I just need the carcass taken out cleanly, including detaching it from the benchtop, adjacent cabinets and neatly cutting the kickboard. Installation of the dishwasher is not required. Prefer someone who has done this before and can ensure the surrounding cabinetry and benchtop aren’t damaged. Located in Mitchelton.

Hi, I’m after a quote to sand and stain our deck. Deck is about 11 years old. Deck is worn more in the exposed areas around the pool, decent in the undercover entertainment area, it has never been sanded.Deck area is about 80 square meters and there are 9 roof poles that need staining. We usually use Sikkens natural colour stain. Thanks

Approx 5 hardwood decking boards needs to be replaced on an outdoor deck

Stain wooden decking area , posts and rail. Is in 2 x sections , one about 1m x 7m and the other 3m x 7m. Has been stained before, just needs fresh coat. All varnish and stain will provided

Replacing the whole window frame (timber) one large window one small

Sanding required only on step part ( not on riser) , approx 10 steps , wood type is pine . You would require your own tools

Full wall in built storage custom cabinet design and build

We’re looking for a carpenter or experienced tradesperson/labourer for 8 hours to assist with a few tasks on a residential build/reno, including: Running in and sheeting walls/ceilings Installing insulation Helping with a few other general carpentry and site jobs Must be reliable, hands-on, and able to work efficiently with minimal supervision. Tools and basic experience with plasterboard/sheathing preferred. Job suits: carpenter, handyman, or experienced construction worker looking for a few solid days’ work.

I need someone handy with cabinetry to modify my existing kitchen cabinet so a standard-size dishwasher can be installed. The cabinet space is currently closed, so it’ll involve removing the door and part of the cabinet to create the opening. What’s needed: Alter and remove part of the cabinet and door to create a dishwasher space Ensure the opening is neat and ready for installation Tidy finish — no rough edges You’ll need: Own tools Experience with kitchen cabinetry or similar work Details: Standard 600mm dishwasher Cabinet material: laminate Location: Enoggera Parking available:yes

Cut the ends of cables (2 ends of 10 cables = 20 total cuts), replace end screws with more robust anchoring to allow for appropriate tension, such as Jaw/Swage Turnbuckle Rigging Screws with end Terminals and stainless steel eye screws. Wire is 3.2mm 7x7. Timber posts. You can see in the attached photo that two of the end screws have come out, so we've decided it makes sense to replace all the ends of the horizontal cables, as well as the ones next to the staircase.

I would like add customised cupboard over the existing kitchen cupboard. (marked in red in the photo)

We have bought Bunnings wooden kitchen bench top, and one wooden kitchen island bench top needing fitting to our new kitchen, the kitchen island has a support pole that can't be moved so the kitchen island bench top has to fit around this

I need an IKEA PAX wardrobe 2 metres long x 2.37 metres tall built and installed in my house. The design has sliding doors, three mesh baskets and nine shelves inside (using as a storage cupboard). It is being delivered this Sunday 19 October so install can be 20th or 21st October. The wall it is being installed along has a skirting board to work with (eg trim it behind where wardrobe will be). We also need a base built eg out of pine to put the wardrobe on top of and skirting boards around outside so there will be some carpentry too. We will supply all materials.

Attach ceiling battens to existing ceiling joists at 3m height for Gyprock sheeting to be installed by plasterer. Materials supplied. Labour only.

Need to retrofit a kaboodle base end panel to the wall so that the new semi integrated dishwasher can be fit in . Cabinet door to the dishwasher also needs to be fit.