Find experienced local carpenters in Dulwich Hill

This is a very small body of work. We're currently facing a challenge with regards to a hidden washer/dryer that sits behind a set of bifold doors in a kitchen area. The current bifold doors meet in the middle and slide along tracks to fold outwards (2 folding doors on either side). With the current system, our washing machine's laundry powder door can't open as it hits the doors when they're folded to the side. As such we've needed to remove one set of doors to use the washer/dryer (2 doors). We think this me be resolved through adding a hinge to the middle and sliding all 4 doors to the right, however, we're concerned the track won't be able to support the weight.

Hello! I need a dog door installed in my solid timber balcony door. - I already have the dog door - Timber balcony door (about 20 mm thick) needs a suitable rectangular section cut out to fit the dog door - The dog door is missing the installation screws, but feel free to improvise if you have some handy, or we can leave it and I’ll find suitable screws later.

Create 2x bulk head. 1) short cabinets - a bulk head the length of the wall so that cabinets look built in. Cabinets will run length of wall. Can be in mdf or gyprock, just so long as it is flush with cabinet doors. Height is approx 300mm, width about 4400mm. It is a pitched ceiling 2) wardrobe so it looks built in, runs 2600, height about 320mm

Supply and install banquet seat for a new cafe in Dulwich Hill. Wood / material TBC 500x6.2m no back - this can we broken into 2 or 3 pieces 500x2.3m no back - one piece Quote to be made onsite asap - Due date: Before Friday, 9 February 2024

Seeking a skilled carpenter to repair skirting boards damaged by a playful puppy. Proof of previous carpentry work required. Task involves fixing chew marks and restoring the skirting board to its original condition. If you have the expertise and a portfolio showcasing your carpentry skills, this task is for you! Please make an offer $ - Due date: Flexible

The drawers in our In built cupboard have come off their rails and need replacing - Due date: Before Friday, 8 December 2023

We need some custom under stairs cupboard/cabinet making. - Due date: Flexible

Move a power outlet approximately 60cm over on wall and add switch to be connected to LED lights for sideboard installation in kitchen - Due date: Needs to be done on Sunday, 29 October 2023

I tried to sand and varnish my kitchen island table top and ruined it - need it sanded back and resealed if possible. Needs a heavy duty sander, I tried with a hand held one and it didn't work. Then I tried turps and a scraper and have scratched the surface as well :( - Due date: Flexible

Source and replace hardwood decking timbers. At least three are rotten in part. Inspection required to determine scope of work and full cost.

Need a dog ramp built that is 130cm (Length) x 25cm (Width). Needs to be able to support a small dog weighing less than 5kgs but is still lightweight and easily storable. Has to have non-slip textured surface on ramp for grip (i.e. textured or carpet like material) and non-slip feet. The ramp itself will need to be able to be placed on top of three existing stairs, resting on the top step (57cm in height). - Due date: Before Sunday, 22 October 2023

I need 2 built in wardrobes made. Along a 2 metre wall and 3 metre ceilings. And approx 80cm deep Need quotes - Due date: Flexible

We need a base built for a cubby house 1500mm x 1370 mm. The land is slightly slanted but the base needs to be flat. We are wanting a base made from pine sleepers. It will go against the fence where the container currently is. - Due date: Flexible

I need a concrete slab with rio for outside my shed. I have timber for the frame. Size 3630 x 620 x 120 - Due date: Flexible

Hi tradies. I'm needing someone familiar with air-conditioning installations to reposition my outdoor unit and shorten the hoses accordingly. Its on a balcony, just on the floor (not wall mounted). I have a wooden (well ventated) cover that I would like to be positioned over it, however a section needs to be cut out to allow it to fit in the new spot (there is a down pipe in the way,so a section to be cut out of the unit to fit around the pipe. - Due date: Flexible

I have no real idea of the genuine budget for this task. Cheapest not always best. Specific tasks... • Re-swing cupboard door • Touch up white laminate • Adhere laminate on door being re-swung • Adhere laminate on strip next to oven • Tighten / realign other cupboard doors (probably 6 or 8) - Due date: Flexible

I have some floor board that need adjustment as they move and also some extra board that are needed in the corners. A handyman installed them quickly but they need additional work to get them to look right. They are resting on timber floorboards as there are wires underneath. - Due date: Flexible

We have a number of built in cupboards that need new shelves, this will require drilling holes, sourcing widgets to hold shelves and cutting and fitting shelves. - Due date: Flexible

Need a brand new shed erected in back yard onto pavers. Concrete fixers included. My husband will be here as a second person to help you but isn’t “handy”. Pavers will be laid next week so the following week would be great. - Due date: Flexible

I’m looking for a skilled craftsperson to build a timber bookcase in pine or other good quality timber. The bookcase is to be low and shaped to fit a corner. It must go around a power point ( far left). There is some unevenness in the floor and corner as the house is old. Sketch of plan attached. I will paint the bookcase but you would ideally provide the timber. Nb: job previously specified hardwood but pine is ok as we are planning to paint it. In Dulwich hill. - Due date: Flexible