Find experienced local carpenters in Brisbane

Removal of the cabinetry under a counter. There’s cupboards and draws and I believe the bottom is what is helping it stay up so it may need to be restructured with support. Ideally I just need under the counter to be completely free. I’m also needing the top redone. Currently the front half of the count sits on the front of the main bench, ideally I’d like the top all one level. I’ll also need a few holes and small squares cut into the top.

I have two floating timber shelves that need to be put on tiled kitchen splashback. Shelves are 600mm and 1800mm. See photos for instructions and tiled splashback. Must have drill for use with tiles.

I’m looking for an experienced professional to clean, sand and recoat the external timber decking, steps and other timber surfaces around my home - seeking quote including labour and materials, including availability and estimated completion time. Scope of work 1. Rear deck and steps Clean, prepare and lightly sand rear timber deck. Apply exterior oil-based timber coating (Sikkens natural satin), including spot-priming bare timber and applying two coats. Coat timber deck steps and risers where specified. Avoid/protect white painted fascia on deck 2. Pool stairs Prepare and recoat timber pool stairs, including the front faces and step treads. 3. Timber seat Clean, prepare and recoat the timber seat in the backyard, including the timber backboards and rear of the seat. 4. Front stairs and landings Prepare and recoat the front stair treads (top and front face only), protecting/avoiding white paint at edges. Prepare and recoat the three timber landings on the front stairs. White-painted fascia, stair sides and other white-painted surfaces must remain clean and undamaged.

Kitchen Cabinet Modification to Fit French Door Fridge – Bardon We’ve recently purchased a home and our double-door French door fridge won’t fit into the existing kitchen cabinet space. We’re looking for a handyman or cabinetmaker who can modify the existing cabinetry to make the opening wider, adjust the surrounding shelving and finish everything neatly so it looks like it was originally designed for the fridge. We’re not looking for a full kitchen renovation, just a practical modification to the existing cabinets. Located in Bardon, Brisbane. Happy to arrange an inspection and discuss pricing.

The bottom weatherboard on my verandah has rotted and split where it meets the deck, about 1m long (see photos). I need the damaged section cut out and replaced with matching weatherboard. Please also check the framing behind it and fix the flashing or seal at the deck junction, then prime and paint to match. Must have your own tools and materials, or quote materials separately. Experience with older timber homes preferred.

Replace 7 treated wooden fence posts about 1.8m from the ground.

I’m working with Heka Hoods to supply the hoods and am looking for a certified and experienced carpenter to: 1. Visit the site to take accurate measurements and confirm the details directly with Heka Hoods before fabrication. 2. Return to install the hoods once they are ready. 2 hoods need installation, shown in the images: • a hood for the roof opening (red lines, waterproofing required where fixing to the concrete slab) • blind covers, L shape, along both blinds **Access and safety requirements:** - The opening is approximately 6 meters high, 2.5m wide - The hood is 900mm deep - Fall-arrest anchors are available on the roof terrace if needed - A suitable ladder or elevated work platform (EWP) may be required for installation. - The Tasker must be a certified carpenter (Heka Hoods requires this qualification, too), own equipment and safety arrangements for working at height. Please outline your relevant experience, and pricing for both measurement and installation. Let me know if you need more information.

Need a 1 x wooden step replaced which is starting to rot. Painting not required. East Brisbane 4169

Looking for an experienced metal/stainless-steel fabricator to measure, fabricate and install a custom folded brushed stainless-steel surround over an existing aluminium shopfront window frame. The existing glazing and aluminium frame are to remain in place. The new stainless-steel surround will fit neatly over the existing frame to give it a high-end architectural finish. Approximate specifications: - Existing frame: 2400 mm wide × 2600 mm high - New surround face width: approx. 100 mm - Projection/apparent thickness from wall: approx. 10 mm - Material: brushed stainless steel - Exposed outer edges to have a soft pencil-rounded finish - Corners to be cleanly mitred - Fixings to be concealed wherever possible - Consistent brushed grain direction and premium finish - Fabricator to recommend appropriate stainless-steel grade, sheet thickness/gauge and fixing method - Site measure required before fabrication - Supply, fabrication and installation required The attached image shows the existing frame on the left and the intended finished appearance on the right, including a detail of the required corner/edge finish. This is a visible shopfront feature, so quality of fabrication, mitres and finishing is important. Please only quote if you have experience with architectural stainless-steel fabrication. Please include supply of all materials, fabrication, delivery and installation

Got a project in Windsor, demoing kitchen, looking for someone keen to setup IKEA Cabinetry and sink. Or if you have good supplier, supply and install kitchen. See before photo and proposed photo Looking at estimate, feel free to ask any questions

During a renovation, we had some windows replaced that were left like this on the outside by the builder. I need someone do add trimming/cladding etc to cover up the exposed parts from the elements.

• Properly secure the dishwasher into the cabinet space (likely using brackets/fixing screws into the benchtop or adjacent cabinetry - happy for you to assess and advise on the best method) • Supply any brackets, screws, or fixings needed for the job • Reinstall a skirting board (kickboard) that was removed/needs refitting once the dishwasher is in place • Check it’s level and sitting flush with surrounding cabinetry Good for: a handyman, appliance installer, or carpenter with dishwasher/cabinetry experience. Notes: • Dishwasher is already plumbed and working - no electrical or plumbing work needed, just fixing/securing

Replace 3 Sets of French Doors Looking for a licensed carpenter/chippy to replace 3 sets of existing timber French doors, including the door frames. Scope of works: Remove and dispose of existing timber French doors and frames. Install 3 new double French door sets, including new frames. Ensure doors are level, square and operate smoothly. Fit existing/new hardware as required (can discuss). Finish with neat trims/architraves if required. Current opening: Approx. 1140mm (W) x 2100mm (H) Preferred new opening: Approx. 1300mm (W) x 2100mm (H), so the opening will need to be widened by around 160mm (subject to inspection and feasibility). Requirements: Licensed and experienced carpenter/chippy. Experience installing French doors. Happy to inspect and provide advice if any structural changes are required before quoting. The attached photos show two of the existing door sets. There are 3 identical sets to be replaced. We will be sourcing the new doors ourselves

Hi all, Looking for an experienced chippy to come on site to quote how much it would be for them to hang a 2.6m x 1.1m (150-200kg) range hood for my pizza resturaunt fitout. Structural drawings along with a form 15 has been completed. My budget is for call out fee so we can meet and you can quote. 👍 I’ll have it lifted into place for you, using hired lifts. Hoping to get this done in the next week. If someone would be available to get this done, I’d be super grateful. Thank you guys.

- Install drawer runner and front piece - Replace inner piece of the joinery (on the shelf)

Replace rotten lower hardwood balustrade rail only x2. Existing post is sound. Reuse existing balusters if possible. Supply matching hardwood, install, prime all cut ends. Painting not required. Price negotiable

4 kitchen cabinet doors needing replacement due to damage. Would like measurement and provision of doors that I can paint and install.

Looking to chat with a cabinet installer to install joinery that has been purchased. It’s pre made, will be ready for install, Kitchen, laundry, Walk in robe, 4 other rooms, outdoor kitchen. Have full plans to show anyone interested. Fee is to chat

Need cabinet modified for dishwasher in Clayfield. Photos avail.

Hi, I’m renovating a unit and looking for someone experienced in cabinetry / kitchen updates. Scope includes: * Assess kitchen cabinets (possibly replace cabinet fronts only) * Fix or replace sliding door (not sliding) * Repair or replace wardrobe doors (open to cost-effective solution) * General advice on best value upgrades vs full replacement Goal: Improve appearance get rid of purple and functionality without full renovation if possible Please include: * Photos of previous similar work * Whether you recommend repair vs replacement * Rough pricing options (budget vs premium)