Find experienced local carpenters in Canberra

3 bed house in Dunlop got freckled iron face bricks in all exterior. Looking for brick staining to cover all exterior with a fresh colour and cover black iron spots in bricks

One of the legs of our dining table recently broke. We need a handy carpenter to either rebuild the leg, or fix the current one. Click on below dropbox link to see PDF containing images and details of the break. https://www.dropbox.com/scl/fi/yedzvkixliwfwil7o04j8/Our-dining-table.pdf?rlkey=dg6pqiic0g2pkayyxz56j8k1t&dl=0

Need to build a trap door on a deck (area currently has removable planks). The trap door should be secure for people to walk on it when closed. Loose planks are available for use.

I need to fit my wash tower but l need help to remove a top cabinet and part of bench top.

Timber panel 1800x600x19mm, to be cut shorter to 1430mm. Located in Strathnairn.

I have some cabinets materials, need someone to come and make me some laundry cabinets.

Looking for a carpenter or similarly qualified professional to repair 4x t-back Parker dining chairs. Joints need to be reglued, new foam in seats and sanding down of frame for oiling.

To remove old bench and cut to fit and install a wooden kitchen bench to small u-shaped kitchen. Kitchen bench measures: a 115cm panel, a 150cm with sink, 130cm with stove top. I have purchase 3 lots of 2200 x 600x 26mm wooden benchtop and benchtop joining kits from Bunnings. No stairs. Located in a townhouse in Watson, ACT.

Large deck approx 60 sq m needs old stain and varnish stripped back with either sanding or chemical and re staining.

Looking for someone to source 2 different pieces of wood (1st photo 116cm long, 2nd photo 291cm long) and replace

We have an imported table from Indonesia consisting of wood pieces and resin put together to create a table. It has split in two places at one end of the table. We need the cracks filled/table repaired please, thankyou.

Deck needs sanding and oiling in dark stain Color is wearing off

I am looking for an experienced and reliable tradesperson to restore my timber deck, ramp, and stairs, including painting the balustrades and frame. The deck is structurally sound but has significant surface weathering, patchy staining, and some mould in shaded areas. The scope of work includes: 🔨 Scope of Works 1. Inspection & Preparation • Inspect deck, ramp, and stairs for loose fixings or damaged boards (replace or secure if required – small allowance included in your quote). • Fill and sand any patched areas on balustrades and frame. 2. Deck Cleaning & Treatment • Apply commercial-grade deck cleaner/brightener to remove dirt, mould, and greying. • Pressure wash and allow to dry fully. 3. Sanding • Machine sand deck, ramp, and stairs to remove old finish and smooth timber (approx. 30–35 m²). • Edge sand and hand sand around posts and stairs. 4. Coating – Deck • Apply 2–3 coats of high-quality decking oil or stain (Cutek, Intergrain, or Cabot’s – to be confirmed with me before starting). • Include anti-slip additive in the final coat on stairs and ramp for safety. 5. Coating – Balustrades & Frame • Sand, prime (if needed), and apply 2 coats of exterior-grade paint (e.g., Dulux Weathershield) to all balustrades and frame. 📏 Approximate Areas • Deck, ramp & stairs: ~30–35 m² • Balustrade/frame: ~20–25 linear metres ⸻ 🛠️ Requirements • Proven experience with deck restorations or exterior painting (please provide photos of past work). • Own equipment (sander, applicators, pressure washer, PPE). • Use quality products (discuss and agree before purchase). • Must leave site tidy and safe at the end of each day.

We are needing 3 x wooden retail stands built 96cm long, 25cm deep and 15cm high

I have two bedside tables (top only) and two outdoorcane chairs which I have started sanding and need help finishing and staining

Recently install gas cook top & gas plumber unable to fixed the kitchen drawer as power shocked back side wall is between , so need to adjust drawer to make it fit

Require the gap between IKEA walk in robes and the wall to be filled. Details: - Suitable infill panel cut to size and fitted - Skirting panels to be continued across infill panel. No painting required, I will do this after fitting. Thanks

Hi there, Looking for an experienced handyman or carpenter to help with some front and back porch upgrades: 🔨 Tasks include: Installing timber tops on approx. 15m of steel railings (front and back porch). Adding wood cladding or rendering to a pillar approx. 4–5m tall at the front porch. Painting timber tops and ensuring a neat, finished look. 💡 Materials: The price I have included is for labour only, as I am hoping to supply materials myself, however I may need some guidance on what to get. If you are happy to supply materials instead, please include that in your quote. 🖼️ Note: I have attached images of my railings and pillar, along with a couple of inspo pics for what I’m aiming for. Thanks!

I have a hallway table that is about 3mm too wide for the VERY snug entry way space. Looking for someone with a wood plane - to shave off the 3-4mm needed to make the table fit. Total surface area needing removal is: Two sides, each 21.5cm H x 40cm W If you have sanding/polishing equipment - that would be helpful also. Would need to do work in situ (at my place) so we can test when it is enough to fit.

I need an approx 3-5cm hole drilled in the side of a cabinet for a cable, then a cable grommet fitted (which I will supply)