Find experienced local carpenters in Dickson

I'm looking for an experienced fabricator in Canberra to design and install custom stainless steel benches and shelves inside my food truck. The goal is to maximize the available space and create organized storage for pots, containers, oil, ghee, and other kitchen essentials. The benches/shelves will need to be custom-made to fit the existing layout of the food truck. If you have experience with stainless steel fabrication or commercial kitchen fit-outs, I'd love to hear from you. Please let me know about your experience, availability, and provide a quote if possible. Thank you!

I need assistance with a final fitting of a kitchen finishing pieces from a joiner. Will provide final photos tonight - added photos The finishing pieces (panel pieces, kick boards, and bulk head) will need to be planed before they are screwed in. There are a few areas that need finishing: 1. 3 panel pieces need to be planed and affixed to a kitchen island. 2. A shelf needs to have the final panel pieces attached and to be screwed into the wall (with a bulk head) 3. The kick boards need to be planed and glued into place 4. The main bulk head needs to be installed. We can assemble beforehand as it is currently not assembled. Some pieces will need to be planned. 5. A panel piece needs to be planned to fit flush 6. Floating shelves need to be installed. Some pieces may need to be glued but will rely on your judgement. We will provide screws and glue.

I need someone to construct two basic bits of furniture. I have all the dimensions and materials (except wood glue). I have attached reference images of both. I planned to make them myself but don't have the tools to do so. 1: A thin console table to go behind the couch. It is a long thin panel with three legs (already cut to size), all just attached with brackets and screws. It also needs a hole cut out on top for an outlet to sit in (we have the outlet). 2: A waterfall edge coffee table to go over an ottoman. Essentially just a panel of wood with two legs to sit over an ottoman. Panel and legs need to be cut and attached at a 45 degree angle with brackets screwed in for extra support. Again, I have all the materials except wood glue. I can bring everything to you for construction or you're welcome to bring tools to my home in Dickson. Nothing needs sanded or oiled. Should be a pretty simple job for someone with the tools, shouldn't take longer than 90 min. Aside from reference images, I've attached some images of the materials I have in case that's helpful.

Have a wall cavity that is 875 mm wide, 1170 mm height and 920 mm deep. Need to build a white shoe drawer. Flexible with the design.

Have a wall cavity that is 875 mm wide, 1170 mm height and 920 mm deep. Need to build a white shoe drawer. Flexible with the design.

I refurbished a cabinet. I have all the materials for the 3 doors to be attached to the bottom section. I need a precision job because the book cabinet is black wood & I varnished the blind wooden doors in a clear varnish.

Relocate Metal Filling Cabinet from Dickson ACT to Wagga Wagga Dimensions: H 2000mm, W 900mm, D 470mm - Weight 30 to 40 kg