Find experienced local carpenters in Brisbane

Need to replace around 3m of rotten facia and lift sagging soffit.

Custom Built-In Shelving Wall Width: 3.0 m Built-In Height: 2.2 m (aligned with door/window head height) Depth: 32–35 cm Finish: Painted to wall colour (flat panel) + timber accent features Design Intent    •   hold vertically stacked books    •   include 10 total shelves    •   provide 2 tall (70 cm) shelves    •   provide 8 standard (30 cm) shelves    •   include 2 × 70 cm high cabinets    •   blend into the room by matching wall colour    •   skirting boards to seamless blend room and cabinet    •   MDF (water resistant)with 2-pack painted finish    •   timber accenting that matches house    •   flat panel doors    •   soft-close hardware    •   full install and clean up

Cabinetry work including: (I) move existing cabinet doors to a new spot (II) remove shelving above fridge to make room for a taller fridge (III) install under bench bin in kitchen.

Timber Repair on Porch, Entrance Gate & Fixing loose Parts of Cast Iron Balustrade - Old Queenslander" Description: "Need experienced carpenter/builder for repairs on elevated porch of character-listed Queenslander in Brisbane. Work required: • Replace rotten horizontal header beam at corner junction (see photos) • Repair/replace deteriorated corner post where beam connects • Re-secure loose cast iron balustrade panels to timber rail • Replace/repair rotten sections of top timber rail • Match existing timber profiles • Repair 1 horizontal beam at Front Entrance Gate (timber): Cut out the termite-damaged section - Splice in new treated timber - Re-attach gate hardware Need tradesperson experienced with older Queenslanders. Elevated work, may require scaffolding. Please inspect in person before quoting. Photos attached show extent of damage. Budget Approx. $1,800-$2,200 (Porch Beam/Cast Iron Balustrade), $500 Timber Entrance Gate

I am looking for a carpenter to complete a few jobs for me, hanging 3 internal doors and quote for an office shelving fit out.

Stain in carpet, tried to spot clean, didn’t do much

Hi, We need help in building cornice on top of our new cabinets and in patching up one hole in the wall. Please provide your pricing. Thank you

Cabinet maker to supply and install a frame support for a kitchen bench. The frame are similar to attached photos (3 legs + horizontal supports).

I need a woodworker with good table saw skills to pick up a dozen 2.4m lengths of pine from my place to be cut length ways down the centre with a 45 degree angle for a French cleat project. The work can be done at my place if you prefer.

Looking for a good tradesman who can think for himself to sort this situation. We need to install 2 x 450mm Euro Cargo bins in the cabinets shown below. But the cabinets are not deep enough for them. The idea is to cut through the back of the cabinet and into the other cabinet behind it. Then install the bins and install a false back on the 2 door cabinet behind. The works have to be done with the cabinets in position. Cannot be removed. I'm providing the bins, but you'll need to provide the white melamine for the false back (Bunnings melamine is fine) and all the screws / consumables.

Have installed IKEA method kitchen cabinets. Need a cabinet maker with keen eyes to advise me if the cabinets are levelled enough for the kitchen countertop to be installed. Quick money just to spot check and confirm but happy to pay variation if further levelling is required. Flexible on dates but needs to be done before Saturday as this is when the stonemason will be out.

I’m looking for a skilled carpenter to build 2 sturdy wooden work benches similar to the one in the attached photo. Details: • Dimensions - see photo with measurements • The build must be solid and suitable for workshop use. • Material: MG10 treated pine for the legs and MDF or something that is relatively water-resistant for the 2 boards • Finish: No need for polish/paint – just clean and sturdy with sanded/curved edges Location / Options: 1. Build at your own workshop and deliver to Milton, Brisbane. OR 2. Use your own tools/materials and build onsite at our workshop in Milton. Timeline - looking to get them built ASAP

My kitchen cabinet doors are not closing, due to the sliding rail mechanism not locking when pushed in. About four draws need fixing.

Need some water damaged weather boards replaced, and quote for stair repairs.

Price is just to swing by today and measure up! Looking for someone to measure, supply and build a casing for our aircon units, which can double as a usable bench. It can be built offsite, and installed at a later date (within a couple of weeks). The unit itself needs to built in a way which the aircon units can be removed if needed.

Description: I need someone to cut and fit a 2x removable wooden base inside my leftside of the cabinet (see photo attached). The goal is to create a sturdy, flat surface at the bottom without drilling into the cabinet. Requirements: Measure the cabinet dimensions accurately 2x Supply and cut an 18mm plywood or MDF board to size Add small rubber stoppers or furniture pads underneath for stability Place the base securely without damaging the cabinet Details: Cabinet photo attached for reference Task involves supply, cut, and install the wooden base No drilling or permanent fixtures needed Location: [Your Suburb, City] Budget: Open to quotes Date: Flexible Skills Required: Basic carpentry Experience measuring and cutting wood precisely What to Bring: Measuring tape Plywood/MDF (18mm) Rubber stoppers/furniture pads Tools for cutting and fitting

Got a new and restored deck 6 months ago that needs to be oiled and stained now. Please refer to images on how big the deck is. Merbau decking boards were used. Also, please let me know what decking oil will be used for the job. Job is in Morningside.

Stainless kitchen bench needs welding job. Need reinforcement

Hi, I am looking for floating shelves to be built and installed in a living room recess and in my study. I would like 2 or 3 x shelves of approximately 90cm wide in the living room I’d like 2 or 3 x shelves of about 100cm in the study. I would like these to be in a light colour wood to match my other decor. I don’t need anything fancy - just a space to put books and decor. I’ve taken pictures to indicate the space. My budget is flexible for a qualified or experienced person who can show me their previous work, so the price is just a placeholder.

Need a qualified carpenter to install slab, take away and dispose old bench slab. Cut new slab, drill holes and install. Instructions from Timber Obsession (place that made the slab) Use circular saw and straight edge should be able to make the cut. Just apply some tape on top of the clear coat we’re your cutting to stop it chipping out. Same with any drill holes that need doing. Then just give those raw areas a light sand re coat those areas only using a brush with some more Norglass Northane satin.