Find a professional pergola installation expert near you

I’m looking for a professional installer for a Yardistry 4.9 m × 3.7 m pergola, to be installed on an existing concrete slab. Could you please provide: • Your price for installation (labour and fixings included) • Your availability / lead time

Need carpenter to quote on labour only, Approximately 8×4 meters in treatment pine I will provide timber

I need the gutters of the pergola checking and cleaning out. I need the slats of the pergola roof cleaning There is a leak where the pergola gutter joins, which needs cleaning up, new screws, and re-sealing with waterproof mastic

Looking for an experienced Pergola louvre installer. Not just a handy man. Experience necessary. Using a standard 3mx 3m kit pergola louvred kit to be trimmed back 2150x 2405.mm Height is standard kit Mounted to the post and wall The pergola will be 2610mm from standard kit, Using pergolux It’s a crank louvred kit. The roofer will install a packer between gutter , The height is 3400mm standard to roof of verandah . The new addition will be 2600mm A piece of aluminium will be placed to block water for height difference

Disassemble pergola purchased on marketplace amd reassemble at my house

It’s half built and just needs to have 5 panels put in I have all the parts but don’t have the right tools

Hi Chris, I accidentally deleted the original post and couldn’t find you, so I’m reaching out here. I would like to install a new pergola. The existing pergola, which will need to be demolished, has the following dimensions: • Height: 2.5 m • Length: 4.6 m • Width: 1.5 m I would like the new pergola to be the same size, with the following specifications: • Roofing: Colorbond roof sheets • Rafters: Colorbond / Galvanized Steel Purlins • Support: Colorbond posts/pillars • Drainage: Gutter and downpipe included • Additional work: Remove the existing pergola and dispose of all rubbish Could you please provide a quote that separates material costs and labor costs? Thank you! Lisa

want to replace the clear panels for new ones can be either clear or smokey colour there are 3 panels each side so 6 in total to replace dispose of old panels

Hi! Im looking for someone to please come and paint my outdoor wooden pergola - will supply paint and brushes... I also have a step ladder if you need. (larger ladder would also be good) its about 15 meters long with posts every 3 meters and some roof pieces of wood that connect to the house. see pics. 2 coats needed. arrival tomorrow around 9am please

I have a pipe that runs from the guttering to a water tank that has fallen and needs to be reattached to a plastic sleeve off the guttering. I also just need the top canvas part of my pergola reattached. It must have blown off in the wind; I need a ladder but can't reach high enough.

1. Cut existing concrete slab/ tiles 2. Dig and install high strength concrete footing for 2 pergola posts: 1000Wx1000Lx900D 3. Concrete supplied

Hi, I want to replace my current cloth pergola roof ideally with a polycarbonate or similar structure (not cloth). I need advice on what roof to buy (reasonable options) that will go on the existing metal structure. I will then buy the roof and will require assistance in installing it (after removing the current roof). Please provide a quote for this end to end process (I have just put a random "budget" for the purpose of the task). Thank you

Pergola needs Colourbond flashing installed, Flashing already purchased and marked up Access: no access to neighbour property, must be installed from on top of pergola (pergola roof mix of colourbond corregated & skylight corrugation) all sections marked cut/fit required on one 1.5m section near lobby Need to supply monument colour tech screws

Supply and install material to enclose end of pergola down to door height. Paint to match existing . 4th pic is of other end and want to match.. Think it's blue board but im not sure

I have a ceiling in my new pergola all prepped, just need a hand painting the ceiling. I have the paint and rollers. It is all masked up ready to go Pergola is 7x7 metres Scissor lift is onsite

Pergola installation Aluminium kit. With 4 zip blinds.. 5m X 3.8m In a pool area. All parts are adjacent to the installation area. But need to be brought into the pool fenced area. Might required the porcelain pavers to be cut out at the feet of the pergola, or bolted through the porcelain with appropriate drill/core drill. Gm-outdoor dot com will show you the product. It's a gumei 220 series.

Need shade cloth and tarp (already purchased) installed to already built pergola.

I would like to build a timber rectangle pergola 5m long 3m wide Posts will be bolted to the concrete slab

Replace 2 Polycarb roofing panels on outside pergola, i have fuxtures and roofing already just need you to jump up on the roof , undo 40 screws and refit the new poly carb roofing , i will be here to help if needed , i just cant get up on pergola roof.

Have a pergola about 12m long. Need 3 - 4 batten lights connected to middle pergola beam. Also need 1 or 2 flood lights connected against pergola to face yard. Have an existing hard wire with some length about 5 metres as a start. May also need to divert a plug point to BBq area counter or against screening post if its possible and meets regulations. Needed by Monday 22nd or latest latest 23rd Tuesday. Thanks.