Find skilled builders in Inner South Melbourne

Note: this is a job post just to connect with a painter. My budget is 700 including materials so only make an offer if you can take it, if you can't don't need to waste time to make an offer. Also please reply with your experience and availability. Pergola Painting Project Summary: 1. Structure: L-Shaped Pergola (Raw Treated Pine) 2. Dimensions: Overall 9.9m x2.55m (horizontal wing) and 7.4m x 2.5m (vertical wing) 3. Estimated Paint Coverage: Approx. 90 - 110sqm(all 4 sides of beams, rafters, and battons) 4. Color & Paint: 1 Coat Exterior Primer + 2 Coats Dulux Weathershield Low Sheen in Monument. 5. Prep Required: Fill all screw/knot holes with exterior filler before painting. Protect translucent panels and paving. 6. Protection: Fully mask/cover nearby glass windows, dark metal posts, and paving underneath with drop sheets and tape before painting. ⚠️ CRITICAL REQUIREMENT – SURFACES PROTECTION: PLEASE NOTE: I had a terrible experience with a previous painter who did a messy job and sprayed/splattered paint all over the place. Job neatness and surface protection are my TOP PRIORITIES.

Looking for an experienced roofer to supply and install a new roof for a L-shaped pergola structure. Current Status: • The timber framing and posts are fully built and ready for roofing sheets/battens/ flashings. • Site is located in Hampton Pergola Dimensions (L-Shape): • Main long edge: 9,910 mm • Side long edge: 7,400 mm • Depth/Widths: 2,550 mm & 2,500 mm (Please refer to the dimension sketch attached). Scope of Work: • Supply and install roof purlins/battens (if required). • Install roofing sheets + wall apron flashings + capping. • Supply and install guttering and downpipe setup. Roofing Preference: • We are currently deciding between Full Polycarbonate Sheets (e.g., Laserlite 3000) vs A Combination of Colorbond + Polycarbonate skylight strips. • We would welcome your professional advice on site regarding light, heat insulation, and aesthetics. Requirements: • Experienced with outdoor pergola roofing, flashing, and gutter installation. • Must have own tools, safety equipments, ladder/scaffolding Image 1 is rough sketch of the size Image 2-3 are current structure Image 4-5 are what kind of effect I want (welcome your expert opinion) This is a task to look for the right person to come onsite to provide quote based

Looking for a superstar to help us remove wall tiles for our bathroom renovation please, need to be careful to cause the least wall damage possible during demolition

I’m after a small pergola / patio with clear roof sheets. The attached photo shows dimensions. The room gets a really good sunlight and we prefer to keep it that way. Open to all frame material but prefer a metallic (aluminium or other suitable options) When replying, please include photos from past projects.

I have just purchased an Easy Shed 1.5m x 1.5m garden shed with grass anchors and a bike hook that will need assembly once delivered. Delivery date is approx 2-10 business days from 29th July so I can advise when I know the exact date - I just want to lock in the right person for now. Assembly only required, plus installation of the bike hook (which just loops over the the top of a panel when being put together) I will prep the area for installation and secure to the ground myself. Easy Shed recommend 2 people for assembly but say it’s possible for one person to do if they’re experienced, so this is up to you 😊

Hi my driveway gate needs to be fixed into the hinges and the bolts need to be screwed back.

The concrete has elevated probably due to roots. Need it 'shaved' and replace to a new drain

Install a flat pack mimosa 4m x 3m aluminium pergola which I recently purchased from Bunnings. My landscapers are laying the pavers this week so require someone to install either Thursday or Friday. Note assembly is a 2 person task. Footings will be done by my landscaper Instruction manual here for reference https://media.prod.bunnings.com.au/api/public/content/56b8d944523d4fb99645969506036a63?v=876f6c71

Rebuilding Bed & Changing Locks. Will make the offer $150 and increase to $200 if able to change locks.

I have purchased a shed from Easy Shed which measures 2.5m x 4.0m. It also has a roller door.

EasyShed Assembly & Installation Required Looking for an experienced handyman to assemble and install a 1.5m x 0.78m EasyShed. The shed has been delivered and is ready for assembly. You will need to bring your own tools, including a rivet gun, as this is required according to the manufacturer's instructions. I have a power drill available on site. Previous experience assembling EasySheds or similar metal garden sheds is preferred. Please ensure the shed is assembled neatly and securely. Please provide: • Your quote • Relevant experience • Availability if Sunday doesn’t work Thank you

we have the shed need it to be assembled on soft ground but have purchased floor system

Spread and compact crushed rock in my driveway

I have a Poly tarp that I need installed over my pergola plus return to dismantle

Looking for someone to cut some drainage lines in a driveway with a low point that is making a puddle. The puddle goes between two drainage pits and I need some lines to allow the water to go into the existing pits.

Client has pulled out the bamboo in the picture. I need all of the bamboo that’s been pulled out to be removed. Would prefer it to be put in a trailer and taken to the tip. Do not worry about removing any more bamboo that’s still in the ground.

Jack hammer concrete out on my side of boundary.. concrete under deck stays. Follow red markings. Is only 2-3 thick as was spill from neighbours paving work. Must not damage decking and be as efficient as possible is an owners corporation although this is on my lot.

Looking for someone experienced to carefully remove (salvage) windows from a demolition property and deliver to Maidstone. Details: • Pickup: Patterson Lakes • Delivery: Maidstone VIC • Windows approx. 1 year old, uPVC double glazed, excellent condition • Still installed – must be removed carefully without damage Sizes: • Large: 2.5m x 2.1m (x2) • Small: 2.5m x 1m (x2) Scope of work: • Carefully dismantle windows • Load and transport safely • Deliver to Maidstone Please confirm: • Your experience with window removal • Tools you will bring • Availability ⚠️ Important: • Must be removed without damage • Some windows are large/heavy Looking to get this done ASAP.

Shed assembly of 2.25m* 1.5m shed. Ground is existing concrete. Cheers

I require someone with a ladder to hang a decoration (made of paper) under my pergola.