Find skilled builders in Hampton VIC

Note: this is a job post just to connect with a painter. My budget is 700 including materials so only make an offer if you can take it, if you can't don't need to waste time to make an offer. Also please reply with your experience and availability. Pergola Painting Project Summary: 1. Structure: L-Shaped Pergola (Raw Treated Pine) 2. Dimensions: Overall 9.9m x2.55m (horizontal wing) and 7.4m x 2.5m (vertical wing) 3. Estimated Paint Coverage: Approx. 90 - 110sqm(all 4 sides of beams, rafters, and battons) 4. Color & Paint: 1 Coat Exterior Primer + 2 Coats Dulux Weathershield Low Sheen in Monument. 5. Prep Required: Fill all screw/knot holes with exterior filler before painting. Protect translucent panels and paving. 6. Protection: Fully mask/cover nearby glass windows, dark metal posts, and paving underneath with drop sheets and tape before painting. ⚠️ CRITICAL REQUIREMENT – SURFACES PROTECTION: PLEASE NOTE: I had a terrible experience with a previous painter who did a messy job and sprayed/splattered paint all over the place. Job neatness and surface protection are my TOP PRIORITIES.

Looking for an experienced roofer to supply and install a new roof for a L-shaped pergola structure. Current Status: • The timber framing and posts are fully built and ready for roofing sheets/battens/ flashings. • Site is located in Hampton Pergola Dimensions (L-Shape): • Main long edge: 9,910 mm • Side long edge: 7,400 mm • Depth/Widths: 2,550 mm & 2,500 mm (Please refer to the dimension sketch attached). Scope of Work: • Supply and install roof purlins/battens (if required). • Install roofing sheets + wall apron flashings + capping. • Supply and install guttering and downpipe setup. Roofing Preference: • We are currently deciding between Full Polycarbonate Sheets (e.g., Laserlite 3000) vs A Combination of Colorbond + Polycarbonate skylight strips. • We would welcome your professional advice on site regarding light, heat insulation, and aesthetics. Requirements: • Experienced with outdoor pergola roofing, flashing, and gutter installation. • Must have own tools, safety equipments, ladder/scaffolding Image 1 is rough sketch of the size Image 2-3 are current structure Image 4-5 are what kind of effect I want (welcome your expert opinion) This is a task to look for the right person to come onsite to provide quote based

EasyShed Assembly & Installation Required Looking for an experienced handyman to assemble and install a 1.5m x 0.78m EasyShed. The shed has been delivered and is ready for assembly. You will need to bring your own tools, including a rivet gun, as this is required according to the manufacturer's instructions. I have a power drill available on site. Previous experience assembling EasySheds or similar metal garden sheds is preferred. Please ensure the shed is assembled neatly and securely. Please provide: • Your quote • Relevant experience • Availability if Sunday doesn’t work Thank you

Put up covering plus guttering , I have posted 2 photos showing my area plus 2 photos of what my neighbours have had done as that’s what I’d like to be done.

need a base or floor for a pergola

Pour concrete slab for easy shed bike shed and assemble shed. brand is easy shed and dimensions 2.25m x 0.78m. Small bike shed.

Looking for someone to assemble an Easyshed 2.25m x 0.78m narrow sliding shed. Pavers are down so it is just assembly in the set location.

Looking for an experienced roof plumber to inspect a pergola / shed roof and see if they can locate where the leak is coming from.. Determine if the the roof needs new sheets or can be sealed ..

I have purchased Absco Shed 2m x 1,5m x 2m from Bunnings and need installer

I have a long shed that I would like demolished as per photos, including rubbish removal. I will clear it out before hand. Note, has power connected. Also. If you can remove all concrete as shown under shed and next to house. Happy for inspection if required About 10m L x 3m W x 3m H Not attached to next door fence

Assembly of Easy Shed bike shed

Looking to have this feature/ sandstone tiles pulled out. Need someone who has done this work before and has the correct equipment/ vacuum etc.

Move 30 sheets of VJ board ( 3m x 1.2m) and 16 lengths of skirting boards ( 5.4m long, not heavy) from the driveway into the garage. Will take about 30min-1h.

Paint and seal 100 sqm driveway

Perfola Roof needs replacing due to hail damage. Roof is approx 6mx3m. Laser light panels.

We have hardwood timber that needs to painted white before we build the pergola. We will supply the paint and it can be done in our backyard.

would like to install floor planks on the tiles and replace the carpet.around 100sq. - Due date: Flexible

Install polycarb sheets to pergola roof. Will be using Sunturf diffused grey sheeting. Dimensions are approx 3.6 (length) x 9.7 (width), with 4 rows of screws. We will have all existing sheets removed and the site clear. Please quote labour only. We can have all materials on site in preparation, or if preferred we can agree on a supply price once labour confirmed. - Due date: Before Monday, 8 January 2024

Current roof sheets are ok, just need extra silicone and waterproofing as it was never installed correctly. Lots of small holes and extra roof battens are required to be installed as some were missed and is making roof sag. Might be extra work for the right tradie that can fix this. - Due date: Before Thursday, 28 September 2023

We need a tin shed dismantled, the concrete slab (100mm thick, no steel) it sits on broken up and a brick pizza oven demolished. Everything then needs to be put in an on-site skip bin or taken directly to the tip. Photos show shed, pizza oven, slab constitution and access way from back yard to street. Price is for labour only. We will pay for skip or pay more if you are taking load to tip yourself. - Due date: Before Sunday, 17 September 2023