Find professional roof installation services in VIC

My rangehood is already installed and fully ducted into the roof cavity. The existing duct currently ends inside the roof cavity. I simply need someone to: * Install a suitable roof vent/cowl through the tiled roof * Connect the existing rangehood duct to the new roof vent Nothing needs to be done to the rangehood itself and no new internal ducting is required. Single-storey house with tiled roof. I will pay for the roof vent/cowl separately.

- Install roof gutters around whole house. - Gutters and all mounting hardware already supplied. - No materials need to be supplied. - To be installed onto Brand New Fascia (old gutters have been removed) Approx 40-45 meters, 4 external corners 1 internal corner.

Supply and Install an antenna to new house. House was built 6 years ago and has ports inside the rooms. An antenna was never installed

I want a permanent transparent roof installed on my feature wall covering the entire wooden frame as shown in picture. SIZE 14 Ft long and 5.5 Ft. Wide See example pic of how I am expecting it to look like. Also see the actual area picture that needs roof.

Licensed electrician needed to prepare wall for a new access door into the roof space/void behind the third floor. See floor plan and photos attached. Work required: * Remove existing wall sconce. * Relocate existing two-gang light switch beside the new door opening. * Inspect and reroute electrical cabling currently running through the proposed door opening. * Relocate any electrical enclosure, junctions, transformers/power supplies or wiring that would obstruct the new door frame. * Supply and install a basic 1200 mm surface-mounted LED batten inside the roof space, using the existing lighting circuit if suitable. * Position the light switch conveniently beside or just inside the new access door. * Supply minor materials, test the work and provide the required electrical safety certificate. Current roof-space access is via a manhole on the middle floor using a ladder.

Need a ventilation fan installed on roof off trailer Fan attached below Needs transformer installed with it as it's 12v

Hi there, I am looking for quote for installation of Zincalume/Colorbond roof. Property Type: Single storey residential Roof Type: Pitched Roof Approximate Roof Area/Size: 120m2 Location: Braybrook 3019 Notes: Current roof is cement sheet asbestos, which will be removed prior Please describe inclusions and exclusions. Thanks Alex

Hello, I need to have my Yakima Trim HD roofracks installed onto my Honda CRV 2017.

Sheeting to roof to cover 5 sky light panels

My kitchen rangehood is installed and working, but it is not ducted to the roof. Smoke and steam currently stay inside the cabinet. Tile roof Scope of Work Cut a hole in the cabinet shelf above the rangehood (no existing hole) Install 150mm aluminium ducting from the rangehood outlet up into the roof cavity Run ducting through the roof and install a proper roof cowl/vent (tile roof) Ensure correct flashing and waterproofing around roof penetration Secure all duct connections (no PVC — must be aluminium or semi‑rigid metal duct) Test airflow to confirm smoke is venting outside

Looking for an experienced handyperson or roof installer to make a cover and fit over an existing tubular steel awning frame above our commercial entrance. The frame is solid but has a curved profile (please see the attached photo

Hi, I need ceiling batts installed on ground level and to finish off upstairs ceiling area (cut small batts to fit inbetween) All roof batts are on site Labour only day rate of $600 per day (Might be a 2 day job) Please bring your own ppe (glasses, mask etc) Ladders are on site I need someone to start ideally Friday 21/8/26 and have it finished Sunday afternoon as the plasters are starting Monday

Need a roof tiler to supply and install missing roof tile as pictured. Flexible with the dates and located in Sunbury. Open to reasonable offers.

Hi I have purchased ikea curtain tracks and would like them installed please. I have all these materials from ikea but would need a grinder to cut the tracks to size and a ladder to install into the roof.

1. installation 18m2 WPC decking 2. Install 20m2 aluminum frame polycarbonate patio roof 3. Material by owner 4. Labour only. Please provide Labour cost.

We are looking for someone to install a floor-to-ceiling mount at a pharmacy in Clayton, Victoria. Once the pole is installed, mount 2 TVs to the pole and commission them. The floor-to-ceiling pole is 5030mm in height. Please ensure you are ok with working at heights. The TV's are mounted at eye level. I do not have any photos to share, but I will have these in the next day or so once the we have finished the shoppfitting. Everything is on site ready to install.

Install woodland grey metal skirting

Need the new installation of one roof sheet. I will pay for the cost of materials. Need done today if possible.

Install Roof Top rack for a brand new 4x4 and then install 270 awnings. All hardwares will be provided. During the process, we will also take videos. So it will take sometime.

- Roof rack put on 4x4. - Solar panel put on 4x4 roof rack. - Clips and chains put on stuff in back of tub. Transported (driven) to Tarneit truck yard to get loaded onto a truck.