Find flat roofing professionals in VIC

Skillion verandah. Plans available. Building permit approved. Post holes already dug & inspected. Materials supplied. Posts into mass concrete footings. BYO tools & fixings.

Looking for a qualified carpenter/builder to supply and install a brand-new ground-level deck and a flat-roof pergola at our property. The site has an existing concrete slab and a brick Alfresco structure, as seen in the attached photos. Decking (49.3 m² total footprint): The entire 49.3 m² area needs to be decked over the existing concrete slab and surrounding ground level. We are tossing up between Merbau or Composite decking. Please provide separate pricing/options for both materials in your quote. Pergola / Verandah (25.55 m² total roof area): broken down as 3.5m × 5m plus an additional 2.3m × 3.5m section. Roofing Specifications: The roof must be a flat design, using mostly white Colorbond roofing. We want a portion of the roof to feature clear or dark-tinted polycarbonate/Colorbond to allow natural sunlight to filter through. Please provide a cost breakdown for two options: Standard single-skin flat roof vs. Insulated flat roof panels so we can compare the pricing difference.

Colorbond pergola flat roof. Give quote.

Need EasyShed expert to build/install new 2.25m x 0.78m x 2.12m tall, Flat Roof Shed, model ETF-S2308-MM. Has just been delivered. Carton not yet opened. Shed to be installed on narrow side of the house. Hinged door needs to hinged on right-hand jamb (when looking from outside) with pad bolt on left-hand side. Shed to be located on a flat area partly concrete and partly plastic floor system tiles (already laid) - see photo. Not requiring any anchoring (unless deemed essential). Person must be EasyShed certified and bring all tools and any benches required to complete the job. Happy to assist you with any basic tasks but will rely on you to do the main job. Date to be done: 1 day within the following: Tue 2 June or between Mon 8 until Thurs 11 June.

I’m looking for someone experienced with Starlink installations to install a Starlink dish on a one-storey flat roof in Ararat. The job includes: * Mounting and securing the Starlink dish properly * Positioning it for the best signal * Neat and safe cable routing into the building * Ensuring installation is weatherproof and secure Please bring any required tools/equipment or let me know beforehand if anything additional is needed. Experience with Starlink installations preferred. Location: Ararat, VIC

Flat roof pergola 6x4 metres

Need help fitting a steel flat roof rack platform to a Prado 120. I’ve already installed the rails onto the car

Assemble 3mx1.5m flat roof easy shed shed on existing concrete base

Looking for an experienced and licensed patio/pergola builder to supply and install a hybrid pergola in Cranbourne North. ​Project Scope: ​Total Dimensions: 8.5m x 3.1m. ​Section 1 (4.3m x 3.1m): Insulated sandwich panels (e.g., Stratco Cooldek or Bondor). Needs structural provision (beams/posts) to allow for future glass enclosure/sunroom conversion. ​Section 2 (4.2m x 3.1m): Standard flat roof (non-insulated) matching the profile of the first section. ​Materials: Colorbond Monument (top) and Off White (smooth ceiling finish for the insulated part). 50mm core thickness. ​Structure: Powder-coated metal posts and frame. ​Extras: Install guttering/downpipes to existing stormwater; provision for 4 LED downlights in the insulated section. ​Site Condition: The structure will be installed over an existing concrete slab. Photos of the area and design concepts are attached. Requirements: ​Must be a licensed builder or roof plumber. ​Prior experience with insulated panel systems (Stratco/Bondor) is essential. ​Must provide photos of previous similar installs. ​Please specify in your offer if your price includes GST and if you handle council permits/certification. Budget: Price is a placeholder; please provide a quote based on supply and install or labor only.

Reseal roof area approx 5 m x 6 m with 3 sky lights

Flat pack assembly and installation of easy shed with 2.25m x 0.78m Flat Roof Shed. To be installed on to concrete slab

I need an experienced and licensed roofer to inspect and repair a leak in a metal flat roof. Only Rain water leaks when there is heavy rain.This needs proper inspection and permanent repair. Its small single storey shop and roof is flat so very easy access

Check roof for any holes that rats may enter they mıght have come ın followıng ınstall of splıt aır con seal holes easy access top - place ladder placıng ıt on the deck on the top floor to access top roof

Assemble a 1.5m x 0.78m Flat Roof Garden Shed Zinc / Standard - 1.82m on a concrete slab. The shed will be delivered on 31/1/2026

The evaporative cooling is blowing normal air, not cold air. The cooler is located on my shop's flat colorbond roof, single storey.

How much for an electrician to put two fans put in two rooms with flat roof i have remote controls

You will need a ladder to get from 1st story flat roof to 2nd story flat roof. I have a ladder to get to 1st story roof. Once on roof you will need to remove all bird nest materials and clean up including removing majority of bird poo from solar panels (gerni with pressure cleaner to achieve best result). Expected to take 4 hours min.

Assemble a 1.5m x 0.78m Flat Roof Garden Shed Zinc / Standard - 1.82m on a concrete slab. The shed has been ordered from Easyshed in December 2025 and is being manufactured. Have yet to find out the delivering date from Easyshed.

I started putting this shed together but got frustrated and left it to finish over the summer break. I’ve since had wrist surgery, so I can’t finish it myself. I’m looking for someone to finish the assembly and place it on pavers I’ve already laid. The space is a bit awkward and narrow, but totally doable. Because of my injury, I won’t be able to help much on the day, so you’ll need to be happy managing the job on your own.

Task is to check satellite dish on a flat roof and its condition. Recalibrate and connect it to the cable which enters lounge room though wall / socket to establish successful connection to receiver box. It was connected before move in, so just a fresh up.