Find professional local plasterers in Bondi Junction

Sheeting, joining, and joint setting work. Please no big companies! Need one person as I have a labourer to help. Great hourly rate. All materials supplied and bought to site so walk in each day!…

Trade Plasterer required to work with Builder and labour. We will be gluing gyprock directly to rendered walls in a large apartment in Bondi. Also installing sheeting to ceilings in lounge room and bathroom. Must be good at setting work and installing cornice. Complete walk up start everything provided including sheeting glue cornice panel lift so all you need to do is basically set joints cut and install cornice. A labourer will be provided at your disposal. You will be contracted for a period of about 3 to 4 weeks coming and going as each area is being prepared. You’ll be paid on a weekly basis. Only trade plasterers need apply please no handyman.

Hi! I’m looking for someone to fix a small damaged area on my wall. The main thing that needs to be repaired is a small hole where the paint/plaster came off after cleaning some mould. If possible, help with properly cleaning/treating the remaining mould would be highly appreciated as well. It’s a small job, just one spot (photo attached). Ideally looking for someone experienced who can make it look clean and seamless. I’m flexible with timing. Please bring your own tools/materials. PS: The area is near the ceiling, so a ladder will be needed to reach it. Thank you!

• Prep: Scrape back peeling pain B-I-N/Peel Stop (Essential for lime wash base). • Bedroom 1: Prep and patch walls. • Bedroom 2: Prep and patch AC hole; install Gyprock to ceiling (over-board). • Stairwell: Install Gyprock to ceiling (over-board); scrape/patch walls. • Front Living Room: Patch ceiling crack; repair drummy/cracked wall near fireplace. Details: • House Type: Old terrace with lime wash/set-coat issues. • Materials: Budget includes all materials (Zinsser, Gyprock, base coat). • Finish: All surfaces to be sanded and paint-ready. • Budget: $2600 (Total Supply & Install). Happy to get paint quote- walls only. Edit- 1 ceiling that is gyprock needs tape where it’s cracking.

Need to make 2 main holes 450x450 in gyprock roof

Hi — need someone to repair a small hole/damage in a plasterboard ceiling and re-fix a 1.7m curtain rail. Location: Bondi Junction. Require proper anchor or timber backing if needed, sanding and paint touch-up to match ceiling. I will supply the rail; please bring anchors/screws, filler, sandpaper, paint and tools. Prefer someone experienced with plasterboard repairs. Please quote total price including materials and estimated time. Available weekdays 10AM to 2PM. Thanks.

Hi guys, we need an internal demo / strip-out at our shop. Please only offer if you can do everything below and leave the site clean. Scope (all included): Demolish and remove 2 non-structural gyprock walls, including timber studs/frame inside Remove all rubbish off-site (gyprock + timber + fixings) — tip fees included Leave the area completely clean (sweep + vacuum) — floor must be spotless, and be careful with the ceiling. Wall sizes: Wall 1: 3.9m W x 3.0m H Wall 2: 2.55m W x 3.0m H Timing: High urgency — tonight (after-hours) is ideal, otherwise ASAP. Requirements: Experience with internal demo/gyprock removal Bring your own tools + protection (drop sheets, dust control, etc.) Must be able to handle disposal + cleanup ---- There is a timber workshop floor/platform we’re removing as part of opening up the showroom. We need the timber to be cut back in a straight line (even/flush edge) so it looks neat and is ready for finishing. After the cut, we need a small ramp/transition installed along the edge to eliminate any trip hazard (safe, tidy, durable). The ramp/transition should be securely fixed and suitable for a retail environment (people walking through all day). Timber workshop floor cut + safe finish We have a timber floor section that needs to be cut straight / even (flush finish) to suit the new open showroom layout Install a small ramp / transition strip to avoid trip hazards (safe, neat finish) Prefer insured (public liability) / professional When offering, please confirm: You understand this is all-inclusive fixed price (demo + disposal + full clean) You can do it after-hours if needed Photos attached.

I need someone to patch / replaster (skim coat) and paint a spare room and bring it back to life for me like new. The walls are cement with plasta and paint over the top I guess. I can see where a previous own has just pained over old water damage without putting a layer of plasta (skip coat) and I don’t want this. This includes painting walls, ceiling, built in wardrobe (inside and out), doorframe and door. Over time the pain has started to crack and peel off in large sections, I don't know why (see photo) I can see some mould near the window (not sure if that is a separate pre task before painting or can be included) (see photo). I removed a light and holes need patching and painting (see image). Looks like piece of cement need sliding door is also cracked (maybe from a repair job years ago). Room size 2.8M x 4.3M

Hi, need a licensed tradesperson (plasterer or passive fire specialist) for a small but compliance-critical ceiling repair in my top-floor (3rd storey) strata unit in Bondi Junction, NSW. Job details: • Patch and fireproof a single 150 mm hole in a double-layer Gyprock fire-rated ceiling. It’s to cover a hole made for range hood ductwork that is going to be removed. • Access via manhole to roof cavity from inside unit (no external roof access needed). • Must restore full fire-resistance level (FRL) per Australian Standards (AS 1530.4/NCC) using tested passive fire system + matching plasterboard reinstatement on underside. • Include photos, product data sheets, and compliance statement for strata AFSS. • No cosmetic finish required (just functional patch); I’ll paint later. Requirements: • Experience with strata fire-rated repairs (double Gyprock ceilings). • Provide tested system detail for this penetration size. • Public liability insurance + relevant certifications. Budget: (open to quotes based on method). Please reply with your experience, proposed approach, and fixed price quote.

Wall mount TV. Gyprock and need appropriate bracket.

I need 2 guys for a day to direct stick, base coat, top coat on brick and around a beam which will have timber blocks in it. Also, install cornice and patch a few walls around a new staircase. Cornice and sheets supplied. Glue, base coat, top coat to be supplied by you. Please allow for sanding once dry

I need help securely hanging a round/oval mirror (from Spotlight) on a plaster wall. • Mirror size: approx. medium (around 60–80 cm) • Wall type: standard plasterboard

I need a gyprocker and painter to complete patch works. Materials needed will be gyprock, sanding materials/equipment and paint. I need this done asap happy to work out a rate to complete works. Thank you Youssuf

Prepare for 2 skylights in roof frame and frame lightwell opening including floor frame adjustments as needed, gyprock, sand and paint. Roofer will separately perform the installation into the tiled roof itself due to the roof being on 2nd floor (Ground + 2) Skylight sizes Velux C01 570x780 Velux M08 1400x780

Looking for a plasterer to replace a section of water damaged gyprock in a kitchen.

Wall repair - Gyprock hole fix

Need ceilings and walls setting

I’ve got a wall in my house with some glass panels. We’d like to remove the glass panels and replace them with gyprock. It’s roughly 3m long.

Skim rendering one wall,2x2 meters

I had an Aircondition unit replaced and need to sheet the cut out section again and patch and sand. I will do the painting myself. Free parking and easy access. I need this done urgently! Phones are attached.