Find experienced local carpenters in West Brisbane

Looking for an experienced carpenter/handyman to carefully remove approximately 6 external timber louvre/privacy screens from the upper-level windows of my house so the painters can paint them properly. Once painting is completed, I need the screens refitted securely in their original positions. The painters will be onsite and can assist with removing/lowering and refitting the screens. They will also provide and leave the trestles and planks required for access, so you will not need to provide these. The job involves careful removal without damaging the screens, windows or surrounding walls, keeping/marking the screens and fixings so they return to the correct positions, and returning after painting to reinstall them. Any obviously deteriorated or unsuitable fixings should be replaced as required. Photos attached showing the screens and access. Please quote for the complete job – removal AND returning to refit all screens after painting.

I’m looking for an experienced carpenter or handyman with good timber repair experience to repair a timber privacy screen at the front of my house. The screen is approximately 2 metres wide × 2.2 metres high. The horizontal privacy slats are generally in good condition, so I would like to retain and reuse them rather than replace the entire screen. The main issue is deterioration/rot in the structural timber frame, particularly the top horizontal rail, bottom horizontal rail and one side frame. There is visible rot at the end of the top rail where it meets the wall. Work required: Remove and replace the deteriorated top rail, bottom rail and damaged side framing. Reuse the existing horizontal slats and any other sound timber wherever possible. Use suitable exterior-grade treated timber Match the existing timber dimensions and overall appearance as closely as reasonably possible. Use appropriate exterior-grade fixings. Prime/seal all replacement timber, including cut ends and joints, to help prevent future moisture damage and rot. Pay particular attention to the area where the timber meets the wall and make sure the replacement is properly protected from water penetration. Leave the repaired screen straight, secure and ready for final painting. Remove and dispose of the damaged/rotted timber. Photos are attached showing the screen and the damaged areas. Please provide a quote including labour and materials.

I’m looking for someone local who can build an outdoor bar cabinet for my pool patio with a built‑in space for our existing bar fridge (fridge is 850mm H × 560mm W × 505mm D). I’m after someone affordable and local who can build this without the premium pricing of outdoor kitchen companies. If this is something you can help with, please let me know your availability and an approximate quote.

I am after a cabinet maker or experienced handyman to install a bathroom vanity cabinet for a tiled bathroom. The tiling will be completed by this weekend, and I need the cabinet installed preferably early next week. The cabinet is 900 mm wide standard cabinet, it comes assembled. Attached are the photos of floor standing cabinet and the bathroom layout. The bathroom photo is before tiling, as tiling will be completed this weekend. Plumbing will be done by a separate plumbing trade.

I have 5 timber panels 2700x600mm I’d like placed on the wall fitting in between the skirting boards - the height is approximately 2350mm. The panels are 2700mm so they need to be cut to fit (I don’t have equipment to do that). I have the screws and glue that bunnings recommend

Looking for a carpenter to assist with the final stages of a renovation. Jobs include cabinet fitting, cladding, door hardware, barn door install etc etc. Hourly rate preferable. Immediate start.

Supply and install new outdoor wooden steps. There are 12 steps that need replacing. In most cases, the risers are sound and can be reused, but all treads will need replacing. The current tread is composed of 2 x wooden sleepers. At the top of the staircase the sleepers are 900 mm x 200 mm x 70 mm. At the bottom of the staircase they are 1200 mm x 200 mm x 70 mm. The new materials should be suitable for outdoor use such as H4 treated sleepers.

Our 75cm wide oven has died. We are looking to replace it with a 60cm wide model. This will leave a gap (15cm wide x 60cm high) in the kitchen cabinetry. Seeking quotes to cover the gap. Please note replacement oven has not been ordered yet, photo is of existing oven.

General Carpentry on renovation projects in Brisbane and Ipswich location.

Remove 3 benchtops Remove 3 cabinets fixed to wall Remove 2 sinks Carry all items from house (downstairs) to the kerbside

I'm looking for a quote on the consultation and install of some kitchen wall cabinetry. Context: we bought a new house but it doesn’t have a rangehood/overhead cabinets. Our current cabinets are mediocre and I don’t want to spend $5k on new professional grade cabinetry. I’m seeking advice on how I can supply using the IKEA Metod cabinet range and get a good quality install. I have a decent grasp on things, I just need someone with more experience to add their input. Scope of Work Consult on selection of cabinetry units, hardware and install. Supply brief so far: 4 x wall cabinets Unit 1 (left) - 40cm wide x 37cm deep x 60cm high wall cabinet, 1 shelf, single door with soft-close hinges, 1 handle Unit 2 (Rangehood cabinet) - 60cm wide x 37cm deep x 60cm high wall cabinet for a Schweigen NAUM-6 undermount rangehood (525mm wide, 150mm top-exit ducting). Cabinet will need cutout to house the rangehood. No shelves, 2 doors with soft-close hinges, 2 handles Unit 3(right) — 60cm wide x 37cm deep x 60cm high wall cabinet, 1 shelf, 2 doors with soft-close hinges, 2 handles Unit 4 (Corner open shelf) - 30cm wide x 37cm deep x 60cm high open wall cabinet (no doors) in dark oak timber finish, 1 middle shelf(dark oak) Filler (left of unit 1) – 2cm x 60cm Door style: we are considering painting all the cabinets to Sage green. Would it be better to get the new overhead as blank canvas so that the colour matches correctly? Handles: Simple modern style — gold 200mm? Optional extras I'd like priced separately: LED strip lighting to the underside of all four cabinets What I'm After A fully itemised quote covering: - Consult for my Supply of all cabinets, doors, hardware, and fittings -Installation labour (assembly, wall mounting, levelling, door alignment). I can also help provide labour. Any additional items you'd recommend that I might have missed Happy to arrange a site visit if that's easier. Budget tbc

Existing fridge space only fits small fridge, we require adjustments to the top cupboard so that we can fit a standard size double door fridge freezer. Additional 1cm would get a suitable fridge in which may mean it’s possible to just remove the additional top cabinet frame and change the front door.

Hi, We had an air tasker come and install our kitchenette and they have messed all of it up so it all needs to be moved down and reinstalled to fix the bench top.

3 timber sleepers (2.4m x 50mm each) have rotted and need replacing. Also requires 3 fence posts (100 x 75mm) replaced due to rotting. Access is from one side so some some fence pairings will need to be removed.

We have 5 wooden posts and 2 door frames that have been chewed on. They need epoxy or wood filler, sanding and painting. Equipment not included but will be reimbursed.

we have 3 internal timbre roller pocket doors that need some maintenance. they won’t slide at all.

Timber base board and uprights have rotted. Need a qualified handyman to be able to remove the base boards (two of them) and then replace all of the uprights including the three long ones in the middle, finally replacing the base boards with new timber Price negotiable and suitable timber will be supplied with your guidance.

Remove and replace kitchen cabinet handles. Handles and screws supplied. Attempted project myself. One of the screws is stuck and will need bolt cutters. 7/27 already completed

Need a trades person to remove our current mirror in bathroom and assemble and install a mirror cabinet in our bathroom. Picture atrached as an idea of the type of cabinet we would need installed..not yet purchased.

I need two hardwood frames cut down to fit Ikea pax wardrobes. One needs a wall cut and hardwood frame. The second room needs hardwood wall frame trimmed or removed to fit wardrobe.