Find an experienced handyman in North Adelaide

Hi, I have a 2008 Land Rover Disco 3 and have replacement door-lock actuator/latch assemblies ready to install. The job involves removing and refitting the door trims, replacing the actuator assemblies for the front driver's door and the rear right-hand passenger door. Please confirm whether you have done Discovery door actuators before, or similar.

Dog door instalation and supply. Window glass dimensions, 27cm x 48cm

1. Reseal to two shower cubicles 2. Fix bathroom door architrave that is water damaged and adjacent hallway skirting board

I need a Small Dog Door to be installed in a pane of glass

Pictures as follows where the hole needs to be cut for door. Door as shown on photos. Glass panel is 815mm H x 525mm W

I have a wall around our stairs that I would like extended and returned back into ceiling, framed, sheeted, plastered ready for paint. Wall is 2800 long and will be raised another 1200 plus a small return of around 700 x 1200 I also have a water damaged section I need replaced, plastered prepped for painting. I would also like a door frame and door installed at the top of the stairs. Water damaged wall will be stripped ready, door is provided. Happy to provide materials if required.

We have a room in our house where we have replaced the ceiling with gyprock. We need the gyprock flushed and cornices added. The room is 4.3m x 4.1m and has a fireplace protruding wall that is 1650mm wide and 360mm deep.

I need someone to fix and paint the walls and fix the sink

The brackets appear to have broken

Handyman required for odd jobs around 2 houses.

I have a cupboard where there is a front loader washing machine and a clothes drier. I don’t want the drier to sit on top of the washing machine, I’d like a shelf installed.

Hi, I’m looking for a handyman/tradie to help with a couple of jobs at my house in North Adelaide. Potential for ongoing work as we’re planning further upgrades. 1. Remove and dispose of backyard awning • Large awning attached under balcony (see photos) • Appears to be fixed to a horizontal bar with a tension cable • Needs to be safely removed and taken away (too large for hard rubbish) • May require 2 people due to size/awkwardness 2. Replace door seals (already purchased) • Remove existing screw-in door seals • Install new compact brush seals (screw-in) • Approx. 4 sets of French doors + 2 standard doors • May require cutting to size (we have a saw if needed)

Two spotlights are not working in the kitchen, underneath the kitchen cupboard. They will have to be replaced. Toilet seat in the bathroom swivels from side to side. The require repair

Hello, I need an experienced craftsman to repair a part that I accidentally broke. I am sending you some photos.

Fly screen door became loose after getting hit by a soccer ball. It needs to be put back in the frame.

We have a blind that needs to be put up in this cavity. it is 1300 wide and 2300 long

Hello! I am trying to pop a new toilet seat on in a rental though have a fused / corroded screw that won’t budge. Will need a handyman with a drill to fix it please and replace with the new one.

Install 2x door (weather) seal to existing door. Cut to size and install 2x door seals to 2x existing doors Door seal length: 925mm Door length: 897mm (front) 897mm (rear) Door seal: Lorient 8303 Product information: https://www.lorient.com.au/en/products/diy-door-and-window-seals/automatic-weather-seals/lsr8303

Door is extremely difficult to close as it is off it's top hinge. I have attached a photo of the hinge for your reference.

Motorised our door awning was extended and damaged in the wind - it is still extended and now possibly the arm is broken - we can’t retract it and it make cause further damage to the home / garden and it rests in a awkward spot