Find an experienced handyman in Ringwood North

After a few hot days, the internal door to the bathroom is not closing properly

Install two DIY 1.5m x 3m awnings on side of house. Awnings come with screw packs. Side of house width is 2m

Need to install protege domestic macerator pump into kitchenette and remove non working one

5 x 7mt shade sail install. Posts already set, hardware available, if more chains needed I can buy from close Bunnings. Posts are not set square, so positioning will be your skill where some chains longer than others. Experiance in such install a must as levels important. You need to drill holes at the required height. Maybe cut the tops of the steel posts if it looks better.(disregard RED addition on diagram). In the photo you will see a 5th post. This was put in to lift the centre of the sail when it stretches over time. It has a stainless steel dish on top to ensure it does not rub away the sail. The current sail split at the stiched join and not for any rubbing reason. Being a large sail I was concerned about flapping hence the centre support. Thos of you engineered minded may consider an alternative design.

I bought a second hand Kent Fairlight stand alone wood heater. Some of the firebricks need replacing and it needs to be installed and fitted with a flue. Must be done by a licensed installer. Please do not quote unless you are licensed. House is single story with raked ceiling (20 degree pitch). I have the flue from the house it was previously installed in - would be great if we could use some of it rather than buy a new one but only if it makes sense to do so.

The tap is leaking under the kitchen sink

VERVE home gym cable machine that needs unboxing/putting together/building. The guidance for set up is 4-6 hours from the manufacturer. Has both a set up guide and a YouTube video. Task Details: * Unboxing & Prep: Unpack and organize hardware.Includes 3m x 3m rubber gym flooring. * Frame Build: Erect heavy 75x75mm steel uprights and crossbeams using metric sockets/Allen keys. * Weight Stacks: Install guide poles and stack plates for dual 150kg weight stacks (300kg total stack weight). * Cable System: Route cable pulleys through upper/lower endcaps, assemble sliding trolley handles, and tension cables. * Leveling & Tightening: Plumb the frame vertically using a spirit level, then torque down all frame bolts from the bottom up. * Testing & Lubrication: Apply silicone lube to guide poles and verify smooth cable travel. Tools Required: Socket set (17mm, 19mm, 24mm), Allen keys, spirit level, step ladder, and rubber mallet. Please state your experience with commercial or home gym assembly when making an offer.

Hi there, I need a help to fix a ceiling crack not only patch it up, but fix it also from the manhole (so something joint the crack side with the new one or any method to prevent this happen again for a long term) and paint it again Reason cause of this might be because of the heavy panel that we have on our roof and causing this ceiling to crack more. Can confirm this is not related to structure change of the building at all.

Hi, I’m looking for someone to install my shed from easy shed on a recently poured slab. Shed dimensions: 2.25m x 2.25m x 2.0m high

Multiple small Handman jobs to be done at Ringwood north. Will pay 40 dollars per hour. 4 hr work.

Cut existing installed cornice, x 2 install new pieces and meet in corner

I need a renderer to cover up a small man hole at the front of the house. Matching the colour of the house.

Hi, I have at least two rot timber window frames need to repair. And the entry door which cannot close properly need to fix. Also the out door timber stair need to fix.

A sink connected to hot and cold water and to the drain Hot water system installed Gas line extended and connected to the equipment fryer stove and kebab machines Open to offers

Install new between house and timber fence. Gate can be either timber or aluminium. Must be securely fixed to prevent dog from leaving. You can suggest your preferred gate and will be added on top of price. Install new dog door in door pictured. Will be a larger model ( to purchase from Bunnings) Door needs a small trim at the bottom also. Price does not include the gate or dog door/ required materials

The door doesnot close properly.

I’m getting new carpet installed on 9 June and need a handyman to help with adjusting my bedroom doors beforehand. Job details: * Remove and reinstall bedroom wooden doors * Trim/sand the bottom of the doors by approximately 5mm to allow clearance for the new carpet * Ensure doors can open and close smoothly after installation Details: * Location: Ringwood north VIC * Date preferred: 9 June * Number of doors: 2 * Please bring your own tools/equipment Looking for someone experienced with door adjustments/carpentry work.

Need someone to come help complete the following: - assemble and install Children’s Gym wall (indoor) - Mount IKEA Hovet mirror - Fix broken towel racks - Fix loose door handles - Mount 3 x small IKEA Mosslanda shelves Before Sunday 24 May

Fix broken chain on vertical blind (one)

Looking for someone to come and replace the clutch & chain of our block out blinds in our bedroom