Find an experienced handyman in Hobart City CBD

Bedroom 1 (Small patch of condensation Damage on the Window Frame): - Scrap away the damaged paint, Sand & Asses the Timber, Fill & Flatten the Corner, Sand the filler flush, Seal with an Oil Based Primer, Apply 2 Top Coats - Plaster & paint 2 holes in the ceiling - Service the bottom of the door Bedroom 2: - Plaster & paint 2 holes in the ceiling - Service the bottom of the door - Fix & paint the bottom of the door frame Living Room: - Paint the corner of the skirting board near the tv - Replace a peice of moisture damaged skirting board, with a new peice, about 1.6 metres with a Oil Based Primer & 2 Top Coats. Bathroom. - Towel Rail is in the wrong spot. If possible, relocate to another spot in the bathroom, behind a stud wall if possible ? Then patch & paint those old holes - Bathroom Sliding Door is glitchy. Fix it, so it glides smoothly in & out. Note: Your can park onsite & will need to supply everything required.

Install pipe shelf onto stainless splashback

my One Active Michelle Bridges treadmill has stopped working. It is giving an E1 code which is probably something electrical.

We have a kitchen cupboard door in our office that keeps falling off its hinges, we need it reinstalling so it won't fall off.

Build a chicken run out of timber and wire in our backyard. Similar to pictures! We have a nesting coop/shelter/house to go inside the run, or if you are interested in building a new one, that's even better. We have oodles of timber for the frame and will supply materials (including wire) that you specify.

Will require drilling of 9 blind brackets and own tools. Blinds brand new, instructions available.

hang 2x internal timber doors inc hardware. needs to be completed by Mon 25/5.

Hi, we've been left completely in the lurch by our carpenter who was supposed to re-wire all flyscreens and re-attach these to the windows of a property in the Huon Valley (about a 12min drive from Huonville). These are all sitting loose in the lounge room including new flywire and rubber tubing, so it would just need moving to the shed or somewhere outside to do the job. All flyscreens need re-wiring and then re-attaching to the windows. This would need to be completed by noon tomorrow Sat 20/12. We have to move into the property tomorrow as we'll have nowhere to live and my wife is immune compromised, so the work would need to be fully finished by the above time - thanks.

Build a garden shed purchased from Easyshed. 2.25x0.78 metres dimensions. To be assembled in my carpark space underground.

i’ve got some old roller blinds to pull down and some new Venetian blinds to put up. probably 2 to 3 hours work. Needs two people as I can’t help.

Need help taking off a bracket and re fitting blind

I don't have a pop rivet gun so thought would pay someone

8 x Roller Shutter install for Weatherboard home Single storey with tiled roof. They are 2.1h x 3.2w All shutters have RF motors

Handyman with tools required for a simple job assembly of one piece of gym equipment

Remove two old Venetian blinds and install Two new roller blinds. Height of wall where blind needs to be fitted is about 2700mm - so you’ll need to use a ladder.

Hi there, I have a couple of built plywood plinths that also have a layer of cement sheeting and render attached. I need someone who has a decent core drill with 70mm core hole attachment that is decent enough to get through the layers (they are fairly thick). I need 9 holes drilled at our office in Hobart asap. - Due date: Before Friday, 18 August 2023

Maintenance issue from council - Due date: Flexible