Find an experienced handyman in Caringbah

We’re looking for an experienced handyman or tradesperson to finish off our partially completed attic storage area. Tasks include: * Filling and setting gaps, joins, corners and screw holes in the plasterboard * Sanding and preparing surfaces for painting * Painting walls and ceiling * finishing a door installed * Completing any other minor work required to make the space neat and functional Preferred Monday or Fridays.

small section of the cornice repainted

Fan has been assembled, old fan taken down. Just need help with securing bracket. Most of the hard work has been done

Repair in medical practice of door , see picture

Looking for someone experienced in flyscreen repairs to replace the damaged mesh on my sliding balcony flyscreens. My dog has scratched and torn the existing mesh in several areas, as shown in the attached photos. Please provide a quote including materials and labour. Located in Caringbah NSW Flexible with dates and times.

Removal of 2 x wardrobes ready for installation of new wardrobes Need to strip back to the gyprock and to floor, it’s in existing rooms / hallway so care required and will be a touch fiddly with the cornice in the hallway (need a small portion on the right hand side not touched - will just need to be cut) Rubbish removal not required

I need a 2.25m2 long by .78cm deep x 1.9 high Easy Shed to be assembled.

Dog has damaged 3 blinds. Need to replace before moving All 3 blinds PVC venetian Measurements 1- 1450x1000/left/white 2- 2100x1000/right/white 3-2100x1200/right/white

I need fly screens for two doors and one window

Hi Team I need the blinds repaired or replaced. 6 vertical blinds won't close. Living/dining: Repair/replace 3 x vertical blinds that do not open/close 3 x Bedrooms: Replace blinds Kitchen: Repair/replace roller blinds above bench top

I need a large bathroom LED mirror hung, 3 towel rails and 3 toilet roll holders installed in the bathrooms. It’s all porcelain tiles. Please only offer to do this job if you have previous experience with drilled in porcelain tiles. I need this done as soon as you can. The job is in Caringbah. Thank, Suzi.

Need Flyscreens Supplied & Installed – Apartment I’m looking for someone to measure, supply, and install flyscreens at my apartment. Approximate measurements: * 2 x Sliding flyscreens for balcony doors: 217 cm (H) × 113 cm (W) each * 1 x Fixed flyscreen for bedroom window: 156 cm (H) × 122 cm (W) * 1 x Fixed flyscreen for spare room window: 156 cm (H) × 88 cm (W) * 1 x Fixed flyscreen for window: 156 cm (H) × 76 cm (W) The measurements are approximate, so you’ll need to take your own final measurements before manufacturing. Please include in your offer: * Supply and installation * Total price (including all materials and labour) * Estimated timeframe to complete the job * Photos or examples of similar work, if available I’m looking for a neat, good-quality finish. Please let me know if you have any questions.

I require a small space to be leveled and a concrete slab to be laid for a garden shed. The dimensions of the slab will be 2005mm x 1195mm. The current space is covered with dirt than can be easily dug up. It is a little uneven but there are no major slopes. The slab should be around 100mm thick and sit slightly above ground level

Looking for an experienced gyprocker/plasterer to reinstate walls and ceilings following termite-related timber remediation. The affected areas have already been opened up. This task is for plasterboard repairs and finishing, not termite treatment or structural timber repairs. There are four areas: A. Garage wall: Re-sheet the exposed wall around the existing doorway, plus repair the opened section of the bulkhead/lining above it. Install insulation that we will supply into the exposed wall cavities before sheeting. See the two garage photos. B. Stair-side wall: Repair the long horizontal opening on the opposite side of the garage wall, above the stairs. C. Hallway: Repair the ceiling access opening and other small affected wall/ceiling areas shown in the photos. D. Laundry/corridor wall: Reinstate the wall opening and associated ceiling inspection holes following the timber top-plate repair. The red line in the “before” photo marks the repaired timber’s location; the laundry doorway is on the right. The red line is a location reference, not an additional repair area. Please include supplying the appropriate plasterboard, necessary backing/support for patches, fixings, tape, compounds, setting and sanding. Finish all repaired surfaces smooth and ready for primer and paint, matching the existing surfaces and corners. We supply the insulation only; please include installation labour. Painting is excluded. Optional extra: Repair or replace the affected laundry cornice to match the existing profile. Please price this separately. Please protect floors, stairs and doorways, contain sanding dust, remove your waste and clean up afterwards. gyprock cutoutss , coovered with paper, are a bit smaller than in size than paper in photos

I need a small shed installed on a concrete base. The shed is colorbond Spanbilt S52, w1760mm x d720mm x h1970mm. It simple and the website has YouTube instructions https://www.spanbiltdirect.com.au/assembly-videos-1 but I don’t have the time to do it. I need it done as soon as possible. The job is in Caringbah.

I've moved offices and need to fixed up the scuffs on the walls (paint from Bunnings) and holes from wall mounts (just need putty and painting over) There's approx 3 small areas of scuffed wall and one where some paints peeled off and 10ish screw holes that need puttying over and painting to make it how it was.

Remove and replace current screen with a similar new screen. Replace picture left screen with picture right screen and dispose of the original shower fittings.

We are looking for a reliable person in Sydney for ongoing casual work, not just a one-off Airtasker job. We expect approximately 2 days of work per week initially, with the potential for more work in future, servicing all around Sydney (and further). We create evacuation diagrams for commercial buildings. The work generally involves: 1. Site inspections You will walk through buildings and collect the information our design team needs to prepare the diagrams. We will train you on exactly what to look for. This includes: Walking through each level while wearing a GoPro camera provided by us Filming the building layout, corridors, exits and surrounding areas Marking the exact locations of fire equipment, exit signs and other required items on printed floor plans using a pen Taking additional photos and notes where anything is unclear No previous fire-industry experience is required, but you must be observant, thorough and comfortable walking through commercial buildings and active construction sites. 2. Installing evacuation diagrams You may also be asked to install the completed diagrams throughout the building. These are generally A3 laminated signs that need to be positioned correctly, hung straight and installed neatly. Basic handyman experience would be helpful. The rate is $50 per hour. Most jobs will be a minimum of around three hours, with some full-day bookings. You will need: Your own reliable vehicle and current driver’s licence Good attention to detail and communication Reliability and weekday availability A White Card, or willingness to obtain one Basic confidence using hand tools Working with Children & Working from heights are bonus - please let me know if you have When applying, please include your location, availability, whether you have a vehicle and licence, and any relevant handyman, construction, inspection or site experience.

Reattach 2-3 panels Glue down small strips that have peeled off Tap is loose Attach handwash pump to bathroom wall

Fix multiple holes in wall and paint match, paint wall