Find gutter repair professionals in Ballarat

Looking for quotes for the following: - Prepare and paint gutters (approx 55m) - Prepare, fill, sand and paint eaves/exposed ends of rafters (see pics - flaking paint etc so it needs to be sanded well) - Prepare and paint fascia boards - Prepare and paint down pipes - Prepare and paint front door and door frame - Prepare and paint security door - Prepare and paint meter box Everything is outdoors and to be painted Anthracite Grey, excluding the meter box which will be Classic Cream. We are looking for more than just a cover paint job. Please include total price, not itemised based on labour, paints etc.

Remove and replace gutter fascias Please quote and open to negotiations

Replace gutter 9m to front of house

Replace gutter and fascia.

Need to install a full house gutter , downpipes .

guttering from front left-hand side to front right hand side of upper guttering and termination around corner and finishes 2 m around corner as well as front bottoms section complete with cream 100x50 down pipe. 5x external angles 2x internal in green and 1xoffse

2 x 12m gutters on bluestone church, plus some smaller lower hanging gutters in front and back.

There is a rusty drain pipe which needs to be repaired or replaced, and as well as a section of guttering that is warped and water overflows so needs to be repaired or replaced. I'd also like to have the gutters cleaned for house (3 bedroom) and large shed.

Two pieces of box gutters will need to be replaced

Gutter guards need installing Have gutter guards pack-galv meshl with screws ect Corro roof only 12 years old, so in great condition Approx 36 meters around the roof gutters ( Also need gutters cleaned before installation. Would prefer to have the job done on 10th April, if possible I'm happy to hear from people that have submitted offers previously, before the ad expired expired

I have bought the gutter guard mesh ect Only need someone to install it Not before end of March, beginning of April '26

Old man’s gutters been put up no good looking to get them taken off and redone using existing ones

The stormwater pipe is run to the position required. Just need someone to cut into layback gutter and install outlet connection so water can run into council layback curb.

Looking for a VBA-licensed roof plumber to remove and replace approx 56 m of COLORBOND Paperbark guttering on a single-storey home in Buninyong (Ballarat region). All materials supplied on site: gutters (~65 m stock), 8 corners, 6 pops, joiners, stop-ends, brackets, screws, etc. I can also cover any small extras (paint, silicone, rivets). Scope: – Remove old gutters (Client can dispose) – Install new gutters with correct falls & outlets – Connect to 3 existing downpipes and install 2 new ones (6 points total after works) – Ensure neat sealing & alignment – Issue VBA Compliance Certificate on completion Site: easy ladder access all sides, sound fascia, power & water available. Timing & payment: – Approx 2-day job (1 person) at $600/day = $1,200 labour total – Flexible weekdays over next several weeks – Paid via Airtasker or ABN invoice or however you prefer To apply: – Must hold current VBA Roof Plumbing Licence/Registration – Please include licence no. and confirm ability to issue CoC – Briefly outline similar recent work Straightforward, well-prepared job with organised client. 😊

📧 Request for Handyman Labour Quote – Gutter, Fascia, Downpipes & Roof Screw Replacement – Maryborough VIC Hello, I would like a labour-only quote for roof plumbing works at a single-storey weatherboard property in Maryborough VIC. Please see the attached scope of works and roof plan for details. --- 📋 Scope of Works – Labour Only Property: Single-storey weatherboard with corrugated steel gable roof (no verandah). Approx. Measurements: Length: 13.5 m Width: 10.5 m Roof area: ~150 m² Fascia perimeter: ~48 m Gutters required: ~27–30 m (on both long sides only) Downpipes: 4 (2 per long side) --- Tasks (Labour Only) 1. Remove and dispose of existing gutters, fascia, and downpipes. 2. Install new fascia (timber or Colorbond) around ~48 m perimeter (materials supplied). 3. Install new gutters (~27–30 m) with brackets, ends & joiners (materials supplied). 4. Install 4 new downpipes (90–100 mm) with bends & stormwater connections (materials supplied). 5. Replace all existing roofing screws (~900–1,000 screws over ~150 m² roof area) with new cyclone-rated screws (supplied). Notes: Fascia required around the whole house. Gutters only on both long sides. 4 downpipes total, 2 each side. --- Please include in your response: Estimated timeframe for completion (days). Labour cost only (materials excluded). Warranty on workmanship (if applicable). Thank you,

Inspect fascia and gutter , rectify any non compliant work ( looks good tho ) new house . Compliance certificate using method on certificate that indicates work was carried out by other and inspected by you Previous builder went under and house is now finished and have no idea who did works and can’t get op

Needing the gutters cleaned out

1. Sand and apply oil to deck, steps and facing (see pics) 2. Sand and apply water based paint to carport gutter, fascia, posts and switchbox cover (see pics). Oil and Paint supplied.

The timber under my gutters and facials has rotten and I think it’s causing a leak inside the house. It’s less than half a metre and I would like it replaced.

Looking for a roof plumber to: -Repair and restore the roof tiles that are broken. The front section of tiles are damaged with displaced/broken roof tiles. -Damage to hips, valleys, fascia, gutters and laundry ceiling. See images for reference.