Find an experienced handyman in Sutherland Shire

I need a climbing wall panel - 8 feet wide x 10.3 high) moves from Illawong to Brookvale

Hi All, My mother in law is in her 90’s and informed me that her TV has suddenly changed from colour to black and white… I’m not sure how she has done this but we need to get it back to colour. U fortunately I don’t live close to her so I can’t go and fix myself Can someone please go to her apartment and check her cable and settings to see if they can put it back to colour?

Strong winds have ripped up the rubber solar and detached it from the roof and the connector. Approx 15 metres by 4 metres. Also need to ensure no leaks.

I am moving my gym to a new location (only 20 seconds away) I have a lot of things drilled into the wall that need to be undrilled. As well as a squat rack setup that is bolted to the floor and together. See photos. A friend of mine did all the drilling originally so I don't have the tools or expertise to unscrew all of it. Need someone ideally with the tools (Rattle gun perhaps? Or impact Drill? I'm not sure) who can help for a few hours disassembling. My friend can help put back together though, i just need help with disassembly. Location Kirrawee in the Sutherland Shire.

I need gyprocker replaced 2000x1500 x2 on large wall x2 cut outs set and sanded then paint whole wall mirrors have been put on either side of the TV and I have to remove them and damage behind mirrors when I remove them only need to be patched but worst-case replaced Chiprock. I will send through photos of the mirrors that were placed next to ton either side. So there are two mirror that I put up on wall about 2.1x1.4 (x2) and when I take them down the wall is going to be ruined as l used liquid nails so either replace the gyprock behind it and and set and sand plus paint Wall is 7mx2.7

My in-laws need a bathroom door installed. 720mm x 2000mm with new hinges, door hardware and door stop.

Needs the Handyman to fix the door at my home

Looking for somebody to Install approx 45 Dekko Wet Tile 300 x 600 x 4mm in Bathroom I have included the installation guide If you are not familiar with the product please refer to the following website https://www.dekkoplus.com.au/dekkowetxl-tile/ Cutting: Best method is Aluminum cutting blade on a track saw or guided circular saw. Plumbing or electrical outlets on the surface can be cut using hole saw kit or grinder. You will need to bring a saw capable of making straight cuts, a drill capable of making circular cuts and a caulking gun. l have the tiles, adhesive and sealant ready for installation. The Dekko tiles will need to cover all tiles in the shower ,shower hob, the wall in the shower attached to the end of the bath, window sill , above the bath 3 tiles high and the tiles in front of the bath. I have purchased a sheet of villa board that will go above the shower to the roof and above the tiles around the bath. Note the tiles will only go 3 tiles high above the bath ( i.e 300mm x 3) The wall from the shower to the far end of the bath is approx 2.6meters . Wall in the shower to roof is 2.1m Please have experience with bathroom renovations.

We have two mirrors (Freedom - Grid Mirror 90x135cm) that need to be hung on the wall. The mirrors need the wire installed at the back. There are already two nails on the wall for hanging.

We have a chain repair kit - but the spring on one side of the roller blind isn’t working - we don’t have the tools to repair it. We would love for it to be fixed instead of replacing the blinds.

Repair hole in wall only. No paint required

We have an older style screen sliding door that need to have the mesh replaced. I would like to replace with pet mesh if possible as our cat has ruined the current mesh. The intention is to renovate eventually so this is going to be a temporary solution instead of replacing the whole door. 1 x fly screen replacement for old style sliding door - The beading needs to be removed and replaced (see imagery) - Pet mesh to be installed if possible Please quote and let me know what is possible. Looking to have this completed within one week ideally.

Need to fix the render on a brick wall to get it ready for tiling.

I have a Ikea Pax wardrobe and Ikea Billy bookcase that needs to be fixed to the wall and make them stable (including supply of relevant hardware - screws/washers etc). There is a skirting board so the wardrobe it will not be flush with wall. Behind the bookcase is a sliding door.

Ceiling skylight has damaged gyprock from a previous leak. Leak has been fixed but gyprock is damaged.

Patch holes where x 10 brackets are installed and holes x 4 brackets were previously placed on Villa board, Please view photos. A sander with a vacuum used is desired.

Hang large 1.5m x 1.5m picture, wall is hollow so will need support added to the wall

Need the number 1 put back on, I have attached pictures of how it used to be and how it is now, you will need a extension ladder. I have the number 1, it just needs to be reattached

Have already dug out area and placed form work. Just need concrete poured to place a garden shed on 2800mm x 1000mm x90mm

Have taken some old fixtures out of our bathroom and need the holes filled and tiles replaced. Would be about 4 or 5 tiles