Find an experienced flooring expert in Calamvale

Looking for a qualified carpenter experienced with steel-frame flooring in Calamvale. There is a metallic clicking/clunking sound from one specific area of the upstairs master bedroom floor when stepped on. The townhouse was built in 2019 with a steel-frame/metal floor system. Suspect a loose floor sheet, screw or fixing — looking for someone to inspect, tighten/secure the loose flooring and repair the issue. The bedroom has wall-to-wall carpet, which may need to be carefully lifted to access the flooring underneath. The carpet will then need to be properly re-stretched and glued/re-secured after the repair.

Looking for an experienced carpenter/IKEA installer to assemble and securely install IKEA PAX wardrobes across 4 WIRs, including skirting board cuts and integrated lighting. 1. Skirting Modification: Neatly cut/notch skirting boards with an oscillating multi-tool so all frames sit flush against the wall. 2. Assembly & Fixing: Assemble 15 tall PAX frames (236cm H), level, join adjacent frames, and anchor securely to timber studs. 3. Fittings & Doors: Install 38 pull-outs/drawers, 4 mirror doors, shelves, and rails. 4. Lighting: Mount 21 ÖVERSIDAN LED strips and connect to 4 TRÅDFRI 30W drivers (plug-and-play). Breakdown by Room (All frames 236cm H): * WIR 1 (2 Frames): - Frames: 1x (100x58cm), 1x (75x35cm) - Doors: 2x KAMMARTORP mirror doors (50x229cm) - Fittings: 3x drawers (100x58), 1x tray, 1x basket, 3x shelves, 3x rails - Lighting: 3x LED strips + 1x driver/remote * WIR 2 (5 Frames): - Frames: 1x (100x58cm), 3x (75x35cm), 1x (50x35cm) - Doors: 2x KAMMARTORP mirror doors (50x229cm) - Fittings: 13x drawers, 1x trouser hanger, 1x tray, 1x basket, 11x shelves, 5x rails - Lighting: 6x LED strips + 1x driver/remote * WIR 3 (7 Frames): - Frames: 6x (75x58cm), 1x (50x35cm) - Fittings: 12x drawers, 1x trouser hanger, 6x trays, 15x shelves, 6x rails - Lighting: 8x LED strips + 1x driver/remote * WIR 4 (4 Frames): - Frames: 1x (75x58cm), 3x (75x35cm) - Fittings: 7x drawers, 1x basket, 8x shelves, 3x rails - Lighting: 4x LED strips + 1x driver/remote Requirements: - Must bring own tools (multi-tool for skirting cuts, laser level, stud finder, wall fixings). - Flat-packs are already in the respective rooms. Cardboard can be left on-site. - Public Liability Insurance and PAX/carpentry experience preferred. - Please quote a fixed, all-inclusive price.

Hi Guys, I need carpet repair work done, and all materials will be provided. The repairs include: 2x thread losses (approx. 75 cm long each) from cat scratches 5x staircase steps requiring carpet repair Thank you!

The stairs in my townhouse have started squeaking when they are used. Could you please arrange for someone to inspect and fix the issue?

We have a room 3.3 x 3.7m and need to strip out the carpet and replace with vinyl floor tiles. The quote should include labour, material, and take away the carpet.

remove and redo the floor Type of gardening: Garden cleanup, Other Size of garden: Under 50m² Has green waste bin: No

Just need someone that is experienced or licensed to help lay the hybrid flooring in the room underneath the stairs. I will supply the material and you will just need to help laying it for me. Thanks

Looking for an experienced flooring installer or handyman. Job details: Repair and reinstall hybrid flooring Some boards were previously removed during renovation Need to reinstall and fix them back properly Focus area: around 4 doorways area Ensure boards are tight and gaps are fixed Install/finish edge trims if needed Materials: All flooring boards are already available onsite (in garage) Flexible with time – looking to get this done soon. Please send your quote and availability.

I need four PVC trim pieces replaced around the deck at the back of my house. These are the edge trims on two PVC sheets (each sheet has two trim pieces). Each piece is about 2 meters long. The original trim fell out from the guardrail and can’t be refitted — replacement is likely needed. Material is exterior-grade PVC. Please bring fasteners and any necessary tools. Photos available. Thanks!

Our walk-in robe had water damage to the carpet and was removed, and we are about to get a new piece of carpet to replace this section. The carpet won't be a perfect match to where it meets the carpet in the main bedroom (after 30 years they don't make the original and even if they did the difference between old and new would be stark) but this is just a temporary fix until we decide what to do with all the flooring in the townhouse. Size of the WIR is 203 cm (approx) by 170cm (approx) Pics include the existing carpet in the bedroom and the point where our new piece would meet.

4bhk townhouse upstairs flooring, need to replace carpet with hybrid

Replace small carpet section with carpet from wardrobe

Hybrid flooring requires on 3 bedroom and stairs, currently carpet , need quote on this, budget price will be change after receive final quote.

Grind the garage floor for epoxy coating.

Two sections need replacing - one has small burns and other pulled section from a pet. Carpet is Barjac “Medina”

The flooring area (currently tiled) is approximately 31.99 m², split into the following sections: 3.3 × 4.7 = 15.51 m² 2.3 × 3.3 = 7.59 m² 2.7 × 3.3 = 8.91 m²

Hi Can someone please do carpet patch repair Thanks

Replace small section of carpet that has been damaged. I have the original spare carpet roll to replace. - Due date: Needs to be done on Wednesday, 29 November 2023

I need a small section of carpet replaced where damage has been done a burn mark and cat scratch/tear. I have the original spare carpet part

Need the section of carpet in upstairs walk-in robe between bedroom and bathroom removed. Carpet has been wet at some stage but no longer. In addition to removing (and disposing of carpet) remnants of underlay and tacking strips need to be removed as well as. Essentially, we would like it prepped to the stage where we can decide to put down hybrid flooring or start over with carpet again. Carpet section is around 2m x 1.8m so roughly 4 m2. If someone has experience with laying hybrid that would be a bonus as they would know what the floor needs to be like if we chose that option.