Find a local floorboard profesional in Inner South Melbourne

Laying 12m2 of floorboards in a vacant office room, onto brand new, perfectly clean, "yellow tongue" chip board. Overall exact room dimensions are 3.4 x 3.5m = 11.9m2, but note that 1 corner of the square room is cutout for a fireplace hearth. Floorboards will be provided, and are "Smart Home Products 914mm x 152 x 2mm self-adhesive vinyl planks" from Bunnings. Boards to be laid up to existing skirts & hearth that do NOT need to be removed

Add a board to the deck to fill a gap, and apply oil

Add a board to the deck to make it level and appy oil

We had to remove (most of) our kitchen kickers to install new flooring. We need someone to remove the remaining kickers and put in new ones throughout the kitchen. We have Laminex Brushed Brass elsewhere in our home and would like that same product used for our new kitchen kick boards. Source/make, install! These are the measurements: 1880 x 140 1365 x 140 1245 x 145 550 x 145 565 x 150 250 x 150 2500 x 150 1750 x 140 660 x 140 The brushed brass needs to be cut and installed horizontally (‘grain’) to match existing kickboards elsewhere in home. Ideally we’re looking for someone who works precisely and neatly to complete the job between October 5th and 8th.

I need some floorboards taken out and replaced. I have the timber to cut to size. Thank you. The second pic is how they should look. Thanks Need done today or tonight if possible

Need these small boards replaced . I have taken the rotten ones out. Hardwood . Narrow boards. Thank you

Sand and polish floorboards of about 18 SQM Must have: Flooring experience Industrial sanding equipment Photos of previous jobs Insurance

Hi, I am renting and noticed that the area where I use my office chair has gone dull and needs to be restored. It's an area of approx. 70cms x 100 kms. Hopefully the pic attached shall give you an idea. Looking for an economical but effective option as I am only renting here Cheers

Need job done as soon as possible. Looking for a handyperson to replace a single damaged hardwood floorboard located inside the cupboard under my stairs. And to fix a door to under my house that has come off its hinges. Details: Scope: Cut out the damaged section/board and fit a solid replacement. Put hinges back on door to under the house. Material: Tasker to supply a suitable piece of timber to fit the gap. Since it's inside a cupboard an exact color/stain match is not important.

Looking for a repair / replacement of floor boards. They have had minor water damage and the scratched at by a dog. The photo shows the board that was installed - I don’t have spares to this needs to be a supply and replace or repair outcome Thanks

We need floorboards replaced with boards to match the existing. A wall was knocked down and the boards used by the previous builder don’t match. We want Baltic pine of a certain width. It’s about 5 lengths of 3.2m needing doing. Plus presumably the skirting board will need be taken off/put back there. Thanks

We have a weatherboard home - timber flooring. In one section (dining room) the floors are squeaking and we would love someone to investigate and fix. House is on stumps and there is access underneath.

Hello! We have around 70cm worth of scratches in length on our flooboards. The cause was the leg of our sofa, where the felt pad attached to the leg came off and exposed the nail to the wooden flooring. The longer scratches are more superficial, but some of the shorter ones more deeper. We require someone who can help with repairing these, if there are multiple options, do advise please. Located in Cheltenham, ideally, Monday, Wednesday, Thursday and Friday work best at 12.30PM, happy to move around times where I can. Thanks!

Looking for an experienced carpenter/handyman to supply, replace damaged boards, and restore our L-shaped front verandah deck. 1. Board Replacement: Supply and install approx 16 linear metres of 80mm Jarrah decking boards to replace rotted/damaged sections. Remove and dispose of old boards. 2. Deck Clean & Restoration: Clean/prep existing and new Jarrah timber (approx. 21m² total area). Apply 3 coats of Feast Watson Black Japan finish (TBC).

Approximately 6 location of warped boards need fixing to remove trip hazard.

I'm looking for 7.5 mm minimum hybrid floorboards for a first story 2Br apartment. Floor plan attached. Measurements Two bedrooms 2.7 x 3.8 metres each Kitchen 5 x 2.85 metres Living room 3.5 x 3.9 metres Hallway 2.1 x 0.8 metres Toilet approx 2.1 x 0.8 metres Bedrooms and living room have carpet. The kitchen aand toilet have tiles so boards will need to be on top of these. Price to include supply partial board to level carpeted areas, floorvaords, carpet removal. Furniture will also need to be moved around to complete the job. Happy to receive quotes for installation only (I supply floorvaords and remove carpet).

**Looking for two quotes** 1. We have one carpeted room with floorboards underneath. Area 16m2. Please provide quotes for sanding and polishing floorboards both with and without carpet removal. 2. The rest of the house has no carpet, please provide another quote for sanding and polishing the whole house which is about 80m2.

I have timber hardwood floor boards installed on top of particle boards. A certain area of the living room (Approx 1.5m x 1.5) experiences noise when walking over it. Access to the floor underneath is tight. I require someone to undertake repairs to clear the noise.

There are a few Baltic pine floorboards in a 1930s apartment that have become bouncy and a couple have split. The subfloor is solid.

I currently have carpet in my second bedroom but will be turning it into a beauty studio so I need floor boards put in. Probably looking at hybrid flooring - just something basic.