Find flat roofing professionals in NSW

2 Pre-fabricated carports to be erected 1 is 3m x 3m the other is 5m x 4m Both have a flat roof. To be installed on footings. Footings have been poured. The Brand of the carports are Best Sheds.

Looking for an experienced wood heater installer to install a new Scandia Supremacy 300 indoor wood heater at my home. Installation required this Tuesday. I will supply all components, including: * Scandia Supremacy 300 Indoor Wood Heater * Scandia 4m Black Sleek Flue Kit * Scandia 250–380mm Tin Roof Flashing The heater location has already been selected. Ceiling height is approximately 2.15m. Scope of work: 1. Position the wood heater in the nominated location. 2. Measure and confirm the correct flue position and required clearances. 3. Cut the required opening through the internal gyprock/plasterboard ceiling. 4. Cut the required opening through the flat metal roof. 5. Install the flue kit correctly through the ceiling and roof. 6. Install and properly seal the roof flashing to ensure the penetration is fully watertight. 7. Complete the wood heater/flue installation and make sure everything is secure and correctly installed. 8. Leave the work area clean and tidy. All components will be onsite and ready. I expect the work to be relatively straightforward and approximately 2–3 hours for someone experienced with this type of installation. Please only make an offer if you have previous experience installing wood heaters and flue systems through metal roofs. When making an offer, please briefly confirm your experience with wood heater installations and whether you can attend on Tuesday.

Build/assemble 2.25m x 0.78m Flat Roof Shed (2.21m high) Easy Shed we have a plastic base and ply for it to sit on

We have a leak in our Colorbond steel flat roof. Water is getting through into the Gyprock ceiling in an upstairs room. We need someone experienced with metal roofing to come out, inspect the roof, locate where the water is getting in, and patch or seal it so it stops. What we need: Inspect the flat Colorbond steel roof and find the source of the leak. Check the usual suspects (flashings, screws and seals, joins, penetrations, and any rust or lifted sheeting). Carry out a patch repair on the day if possible. Let us know what was found and whether any larger follow up work is needed. We had it repaired a few years ago, now a new spot is leaking

Need my easyshed falt roof garden shed assembled in my garage. Dimensions are 2.25m x 0.78m

Assembly of Easy Shed 3m x 0.78m Flat Roof Shed

Supply and install below roofing for newly building granny flat which is 60 sqm with 17 degrees pitch Monier Elabana concrete roof tiles - Sambuca Color. Batten 38x38 : Ridge Apex: Ridge cap: Tiles : Sarking: Gutter Fascia Eaves

Need an EasyShed 2.25m × 0.78m Flat Roof Garden Shed assembled in our backyard Paving slab already in place To be installed at the corner of the fence (easy access) Shed to be assembled, positioned & anchored on pavers (Btw I assembled the roof section of the shed but no additional manpower to do the rest 😂) Pls bring your own tools esp. Pop Rivet Gun & Drill bits. Looking for someone reliable & have experience with metal shed installs (preferably EasyShed) Happy to answer your questions.

Hey - Would like someone to assemble an easy shed please - 2.25m x 0.78m Flat Roof Garden Shed Standard - 1.82m The shed is in a covered garage in Surry hills. Please bring tools - everything else should be in the box. There is space in the parking space but also a visitors bay next door. Ideally come 05/03/26 but can be flexible. Cheers

Replace colourbond roof sheets on flat single story 8.5m x 13m wide roof

2.25x.78x2.12 m (tall ) flat roof easy garden shed assembly

I need someone to install an VHF external antenna on a granny flat roof. Antenna already purchased

Concrete foundation is done with rebated floor. The 1.5m x 0.78m Flat Roof Shed and concrete fixing kit is being delivered Monday 2nd Feb Possible dates for the job 4, 6 or 7 Feb

Assemble a flat pack shed in underground garage.

Help build an easy shed flat roof. 3m.

Easy Shed - 3 metres x 0.78 flat roof shed x 2 Brand new Easy location to get to

Paint the rusted metal roof 30-40sqm

Assembly of EasyShed Flat Roof Garden Shed (H 1.82m x W 1.5m x D 0.78) on our back deck. https://easyshed.com.au/products/flat-roof-garden-shed-1-5m-w-x-0-78m-d-classic?_pos=1&_fid=9864a2159&_ss=c

Shed to be installed between fence line and wall of house Has sliding doors and flat door Need to bolt it down Should all be done in 2 to 3 hours I will be helping as well

For Mitsubishi triton 2015 mq- Supply and install (or show me which product to buy online- I buy then you install) a flat platform with backbone to support a rooftop tent. Must be approx 120cm- 130cm wide by 140-160cm long.