Find experienced local fencing contractors in Wollert

Build new home fence need a quote

Install a fence gate along with a fixed panel on the side of my property. The door to be 1500mm wide and fixed panel to be 500mm wide. I want both panels and door to be 1800mm high. I want colour bond to be used. I want supply and install.

I’d like a small brick fence built, single profile. Approximately 1 m high, already have the bricks. The footing will have to be dug out and cement poured as part of the job also.

Need gate latch installed. I have the latch and screws, just dont have the right drill / bit

Fence fell down in the wind some time ago. Needing it put back up please as have inspection on Wednesday Thank you

New build needs landscaping and fencing

I need to install small fence along driveway .

I have a PVC side gate (1800mm) that I want installed. - I have the side post (50mm x 50mm) steel, 2.4m long (to be concreted in) - And return post (50mm x 50mm), 1.8m long (to be attached to brick wall) - I also have TEK screws for metal I need the gate installed, including supply of latch + hinge

Just need to install a side fence gate 1.1 m wide approx

replace rotten timber post and want quote supply and install lattice

Hi Taskers, I need two plinth boards at the base of my wooden fence straightened and secured. Each section is approx. 2 metres long. The plinths have started to bow outwards, and I want them repaired using the same method shown in the photos — metal stakes/brackets screwed into the plinth to pull it flush and keep it secure. What I need: ✔ Straighten 2 × plinth board sections (around 2m each) ✔ Supply & install metal stakes/brackets (same style as the previous repair) ✔ Ensure plinths sit flush, straight and secure ✔ Keep the job neat and avoid damage to concrete or fence panels

Reposting the front fence as the existing fence has come out. I can share the pictures what needs to be done. - Due date: Flexible

Need temporary fencing on vacant residential land 14m front only need for 3 to 6 month

Need a timber fence 28m length 1.8 hight Within same Treated timber

Wooden side fence 1.8m capped. 25m long

Need a timber fence built, its about 1500mm wide. Tradesman to supply all matetials

Looking for a professional to supply and install a front fence and gate as per the attached picture (horizontal slat style). Details: • Location: Wollert VIC • Fence dimensions: Attached in the pic • Fence height: 1.5 metres • Material: Aluminium or steel horizontal slat fencing • Gate: Pedestrian gate • Finish: Powder-coated (preferably black or dark grey) Please include in your quote: • Material and labour cost • Estimated timeline for completion • Any warranty or maintenance details Photos and references of similar work would be appreciated.

A part of my fence has fallen and I want to get it fixed. Will also need additional support so it does not fall again. All fallen panels still available.

1. 1.8m height colorbond fence* (2.4m posts concreted in 600mm deep footings 1.8m height colorbond sheets)- 19m 2. 1.8m high colorbond locked panel on the RHS- 1 3. Single colorbond gate 900mm wide x 1.8m high and locked panel on the LHS- 1 Colour- Woodland Grey®

The fence has come off because of strong winds last weekend. This needs to be reinstated.