Find experienced local fencing contractors in Sanctuary Lakes

We’re looking for an experienced fence guy to complete the chain mesh fence works at Point Cook VIC. Scope of works: - 3.0meter chain mesh fence - Tightening wire and 3x joints - Cleaning up and tightening lace wire - General tidy-up of fence installation Requirements: Experience with chain mesh fencing Own basic tools preferred Reliable and able to meet deadlines 📅 Must be completed by: Wednesday, 28 January 2026 See attached image to complete.

I’m seeking an experienced fencer to supply and install a freestanding aluminium fence enclosure, with one side fixed to an existing structure, to the specifications below. Fence layout & dimensions Rectangular footprint: 3.0m x 5.5m Fence height: minimum 1200mm One 3.0m side to use an existing bungalow wall as part of the enclosure Fence to be securely fixed / bolted to the wall Installer to confirm appropriate fixings for the wall construction Remaining sides to be freestanding fencing 1.0m wide gate installed on one side of the fence, positioned toward one end (not centred) Gate requirements: Outward opening Self-closing Self-latching Key lockable Latch release height minimum 1500mm Installation Maximum gap under fence: ≤100mm Fence and wall junctions to leave no gaps exceeding 100mm Ground & site conditions - Grass / soil base One side fixed to an existing bungalow wall Fence to be rigid and securely anchored Materials Prefer black or dark aluminium modular fencing Please include in your response Confirmation you can fix fencing to an existing wall

I need to get 5 post straighten in Laverton area

5.4 meter fence need to extend to higher , we will buy material, need people to fix it

I need an experienced fencing/handyman to repair my existing timber fence at my home in Altona Meadows. It has been loose or broken in both side of the house.

repairing and reinforcing sections of our backyard fence. I’ve attached photos showing the specific areas that need attention. In summary, the work required includes: Repairing the damaged or unstable sections of the fence Reinforcing any weak posts or panels Assessing overall structural stability and recommending any additional fixes where necessary

Need a quote to replace the side timber fence of my home. 18.5m long 1.8m high. Job to be done mid Jan 2026

I would need the existing gate to be removed and a new gate to be installed the support on both ends as you can see in the picture is made of bricks in which I will need the gate of both ends to be hinged on the brick wall and when it's closed it is to be perfectly aligned in which there are no gaps in between both parts of the gate Gate dimensions 3m x 1.4m I would also like the existing fence at the front to be removed and new ones installed to match the gate colour and design Fence : approx 7m length I am open to suggestions of what designs you can provide for me I do not want top of the range Gates just decent and cheap

Need a handyman to install two 2.7 treated H 4 posts into the ground. Have posts and cement. Please don’t leave a message on message bank as lm deaf

Have a current carport that is too low and narrow. Wanting to rebuild or alter current carport. Timber build to for caravan.

I need 2 x 3.3m wide, 1.8m high sections of treated pine fence replaced - pailings, crossbeams and two posts. This is as a result of storm damage. Would need works completed by 30 June.

Spa barrier glass gate needs rehanging. Aluminium post is Swiss cheese and may need to be rotated but is glued to deck. Hinges supplied

I need to replace existing timber boundry side fence (in 2 separate sections), section 1: 11450mm, section 2:11250, height 1800mm. Can you please provide a quote for these measurements in colourbond, both sawtooth and trimline profile. Colour: monument. Can you also remove and dispose of existing timber fence? For your information there's concrete pathways on either side. I will need quote as soon as possible, as I need to send it to the realestate of the neighbouring property for approval. The job is located in Altona Meadows, 3028.

12 steel posts (90 x90)to be set in concrete min 600 deep. The only concrete is at existing driveway. Letter box will be removed and anything in the way. The cacti corner garden is set in so.should not be in the way. The steel will be cleaned up and I will get a few more posts too. Ideally the side rails could be welded in position to the posts which can help with the post position prior concreting. Bamboo is a mock up,as we have dog and need it safe. Cheers ..Hope the eally, measurements are clear and more local, more better lol

New fence has been erected. We would like to install wpc panels on part of the fence as feature wall

Install pre-fab fence and gate at a childcare centre. Will have in-ground posts, not flanged - one post flush to fence, one flush to brick wall and of course another for gate. All fence and gate parts supplied, just requires installation. Total is 3m width, likely gate width of 1500, so 1500 of fence (will need to be cut down as comes 2400). Height is 1200. Pics show ground, wall, fence and an example of the type of fence panel.

Need help to fix the back of my fence that fall off quite a bit

Hi Airtaskers, I’m looking for quotes to replace my backyard fence. The project details are as follows: 1. Main Fence: Length: Approx. 12.5 meters Height: 1.95 meters Fence Type: Treated Pine Paling with Hardwood Posts. 2. Additional Fence Section: Length: Approx. 2 meters Location: At the corner of my block, adjoining the main fence at a 90-degree angle. Other Notes: The fence backs onto a park, so there is easy access. The job will include demolition and removal of the old fence. Timeline: The project is to be completed mid to late January 2025. Please provide your quote and availability for January. I am only collecting quotes at this stage. Thank you! Looking forward to your responses.

My backyard fence is leaning over and we require help straightening it. We are unsure of the reason why it's leaning over. It could be as simple as needing a couple of screws or might require reinforcement.

I would to do the installation of the electric gate and fence installation who can come and do an inspection and give a better quote for it? Already I bought an electric gate but for the fence need to buy materials and do the installation of both gate and fence. The fence height is 1.8 m (need to buy material and do the installation) Gate height 2 m( already purchased need to install)