Find experienced local fencing contractors in Inner West Sydney

Rear garden fence is leaning over due to small fig tree. Tree now removed and fence posts need a re pour of concrete or stakes to support and straighten. Fence is classic double Pailing and is 1.8m high with a 400mm lattice topping 3-4 posts will need stabilising and 1-2 2m lengths of lattice will need replacing as they have broken. Lean is very slight say 10-15 degrees Total length of fence is 15m but leaning component is 3-4 metres OFFER INCLUDES MATERIALS

See photos attached: 1) Removal of wood palings 2)Cut down steel fence into pieces with an angle grinder (you will need to provide the angle grinder) 3) These items to be placed in a skip bin which we will order Fence length: approx 7.5m; Fence height: approx 2.33m

Install a timber garden fence, measuring approx 7.5m. Excluding materials.

Back and side fence consist of bamboo panels. One of the side panels needs repair. Both fences each 7 m long need painting. They will need to be cleaned before, perhaps pressure hose needed? The garden is full of beautiful plants , so care is needed.

Repair and strengthen timer posts (rotten at the bottom ) maybe by galvanised steel bracket between the posts and the timber deck .

Remove an existing timber side gate and buy/make a new timber one and install it.

We need a rotting wooden garden fence replacing with a new simple timber paling fence. The fence is on the boundary of mine and my neighbour's property and is approximately 5.3 m long. We would need the new fence to be a bit taller than the existing one, about 2.2m (the ground drops away on the neighbour's side so it is a bit taller than it looks). Please see photos attached.

Attach 3 garden screens to 4 posts and then attach posts to 4 concrete blocks - Due date: Flexible

Need fence decor screen. Please share ideas, quote and pictures of your work. Fence is being painted to grey colour. - Due date: Flexible

Replace existing timber gate in side fence Height 174x90 - Due date: Flexible

I need two decorative garden screens installed in a corner in the backyard. They need to go diagonally across the fence (i.e. form a triangle with the fence) and need to be freestanding in the soil. The ground has been challenging - there are bricks on one side and a wooden plank on the other side. The bricks have been somewhat dug up but the plank will need to be cut. I have the garden panels and posts. You will need to bring all tools to complete the job and cement (or let me know what to buy and I can buy the cement beforehand). Specifications for items I have to be installed: Whites oxyshield screen panels 1800x900mm - x2 Whites 1970mm Screen up joiner posts - x3 Whites screen up anchor plates - x3 Need the job done asap please.

replace 30m appx of wooden garden fence - Due date: Flexible

A wooden paling garden fence is leaning and I need help to fix it - Due date: Needs to be done on Thursday, 22 September 2022

We need a sturdy fence installed with metal t-posts and fence panels supplied. First image shows where fence will be installed at top of stairs. It needs to be sturdy as it is for child proofing. Second photo is general idea of how fence will look.

I want a garden mural painted on a garden gate. The gate is 900mm wide x 1800mm high. Something simple with birds, trees, flowers, etc. You'd need to provide examples of your mural work and your design idea for the gate. You would then need to paint the mural on the gate between 20th February and 5th March. Attached are some ideas of murals. And a drawing of what the gate looks like. - Due date: Before Sunday, 6th Mar 2022

I’m looking to build a garden fence approx. 12 metres x 2.1metre tall. One boundary only. Existing fence in picture. Any of this timber can be reused if suitable.

I share a side fence with my neighbour at the back of my house which needs replacing. I’m looking for a new single paling timber fence to be installed - approx 7 metres long. Standard height of about 1.7m. Expect a post will need to be placed approx every 1.5m. Most of the fence is open whilst a small portion of approx 2m runs alongside the structure of our house. A photo is included that shows this to be quite overgrown - I intend on clearing out this space when I remove the fence, so no need to include removal in your quote. Please include carting the existing fence material away in your quote.

We have 4 young Jasmin plants. I need some wire strung on our wooden fence to let them climb. Photo of fence provided. Contactless as we have rear access to garden. Probably 3 wires horizontally. Labour and materials.

Need a fencer / welder to install a wrought iron fence (similar to what you in parks) about 3m for guard dog at side of the front of our heritage brick home. - Due date: Flexible

1.Photo 2 Install a child-resistant barrier that separates the swimming pool from any residential building. 2. Photo 3-4.The pool fence etc have gaps more than 100mm which could potentially lead to unrestricted access into the pool area.Install a new panel or shield with another material such as Perspex that will effectively reduce the gaps. 3. Photo 5.Install a new panel or shield with another material such as Perspex or steel wire with <8 mm gaps that will effectively reduce the gap/s in the pool fence. Extend the height of the barrier or remove any object/s reducing the effective height. 4. Photo 6-7.The boundary pool fence/ barrier is less than 1800 mm high in areas along the fence from the top of the pool fence to the ground finish level which could lead to potential unrestricted access into the pool area.Extend the height of the boundary fence/barrier or install a new one. 5. Photo 8-11.There are structural components not capable of sustaining a force of 330 N without any or part of a component breaking, showing signs of fracture or loosening so the effectiveness of the panel is impaired.Repair or replace the structural components noted which shall be capable of sustaining a force of 330 N. 6.Photo 12.The pool gate is not self-closing or self-latching as it does not automatically operate on the closing of the gate and prevents the gate from being re-opened without being manually releasing it.The pool gate or latch needs to be realigned or replaced so that it is self-closing or latching. 7. Photo 13-14.There are objects or vegetation in one the non-climbable zones NCZ which could potentially be used as a footing to gain access into the pool area. 8.There is no appropriate or current resuscitation (CPR) sign, including updated details of DRSABCD.

Need colorbond fence installed, timber sleeper as well if there's identified gap, includes removal of existing timber fence. Height of fence 1.8M

Job Title: Supply & Install Timber Front Fence with Gates – Ashbury NSW 2193 Seeking a licensed contractor to supply and install a front fence and two gates, as per attached site photos. Design must comply with NSW Exempt Development Code. Scope: Treated pine fence (H3+), dressed finish; vertical slats, flat-top, ~15mm gaps for minimum 20% open area above 400mm. Max height 1.2m; approx. 8.5–9m total length (site measure to confirm). Painted/sealed in light cream or to match house. Timber posts with capping, concrete footing. Gates: Pedestrian gate (left): 0.8m x 1.2m, black powder-coated steel frame, inward swing, key-lock latch. Sliding driveway gate (right): 3.65m, matching style in black steel frame, manual slide with steel bottom rail and ball-bearing rollers; please quote a separate price for automation option. Compliance: Must not exceed 1.2m height; at least 20% open above 400mm. Gates must not open outward onto public path; all metal is low-reflective/powder-coated. Contractor must hold relevant fencing/carpentry licence. Inclusions: All materials, installation, painting/sealing, hardware, and complete clean-up/offcut removal. Timeline: Ready to start ASAP, prefer completion within 3–5 working days (weather permitting). To quote: Supply, install, paint/seal, clear site. Attach photos of similar work, licence number and ABN. Site visit recommended for accurate quote. Contact for inspection or further details. Images attached: Current site for reference.

We have a small puppy. She is getting in we the colour bond gate. Also need a small gate to stop her getting down the side if the house.

Need two sheets replaced . Needs to be same color

colorbond fence with retaining wall

install colorbond fencing. Suburb burwood. Side of the house with no neighbour. some of the fence needs drill to go on top of existing brick work.

I have a colourbond fence that the wind has blown off three panels needs to be drilled back into place

Install new colorbond fencing

Remove 14metre wooden fence then install colorbond fencing 30metre long and 1.8metre height. Part of the new fence approx 16metre will need to be installed on top of existing brickwork. May need core drilling. or May need removal of old concrete bricks. Suburb burwood. Side of the house with no neighbour. Thanks. Alvin.

Remove and dispose of rotted wooden single paling fence at cottage and supply and erect new 6m monument colour colourbond fence and posts.

Demolition and removal of existing timber fence and lettice 14.5m and supply and install new colourbond fence old style sheets 2.1m x 14.5m

Supply and install gate on side passage

need side gate. approx 1.80metre high. 1.13metre wide. door can be colorbond. burwood.

Remove 14metre wooden fence then install colorbond fencing 30metre long and 1.8metre height. Part of the new fence approx 16metre will need to be installed on top of existing brickwork. Suburb burwood. Side of the house with no neighbour.

Replace approx 20m of old existing 18m high colorbond with 2.4m high

Remove / dispose of timber back fence and install colorbond fence. There are three properties that share this boundary fence. See attached picture, my property is the highlighted one, but the property owner behind me would like to whole fence replaced for his boundary, and my next door neighbour has agreed.

I need 6 panels re fixed with 7 new posts (14 Posts as each post has 2 ) and 6 new timber sleepers. Panels can be re-used. few bottom rails may need replacement ,if found to be bent. Will pay extra when on site when bottom rails need replaced. Labour and Materials supply quote

Need to replace colour bond fence about 4 panels. Panels can be reused. need new posts and re concrete posts. Labour only quote. All materials costs will be reimbursed seperately

Replace 5 existing colourbond panels with new panels. Dispose of the old panels. A few Existing panels have rust at their base Please qiote for labour and materials

I would like a bin enclosure area to be constructed using colorbond,the area is 9 m in total length