Find experienced local fencing contractors in Balmain

Replace rotten rails on picket fence. (Pickets are mostly reusable.) Replace rotted gate post. Possible repair to gate. Repaint to match current. The fence has 3 spans with 2 rails on each. The most in need of repair (photos) is 2.4m. (The next is 2.0m and the 3rd is 2.5m and I will take advice on the need to replace or repair). The gate post/stop is 1.5m high (photos). (again I will take advice on needed repair on the gate) - Due date: Flexible

Replace front and side picket fence on balcony, make gate on one side Price is negotiable, happy for you to quote properly. - Due date: Flexible

We need an extension to an exisiting galvanised roll top wire mesh fence at the rear of the property. - Due date: Flexible

Measure up, purchase and install wood lattice on top of back fence shared with neighbours. It’s awkward to access due to a hedge in front. Lattice is $45 from Bunnings. Bunnings is a 15min walk away, 5min drive. - Due date: Flexible

Bird/possum deterrent spikes installed on top of brushwood fencing in courtyard. - Due date: Needs to be done on Wednesday, 19 July 2023

Replace existing wooden side gate. I would like the new gate to look exactly like the old gate. Must install the existing lock in the new gate and use timber suitable for outdoors and preprinted preferably. No need to paint. - Due date: Flexible

Install new and the house number to front gate and fence - Due date: Needs to be done on Wednesday, 25 January 2023

41m treated pine paling fence 1800 x 100*16mm with 50*50 galvanised steel posts with 70*50mm treated pine cross rails. Additional cost to paint one side. Additional cost to paint both sides. - Due date: Flexible

Hoop iron front fence of 1870’s corner terrace requires straightening of 3 verticals and straightening and reattachment of another. Sandstone foundations and coping currently being relaid for fence to be re seated. Fence is approx 3.5m W x 2.5m Return and currently in two pieces which will need to be welded at corner when refitted. - Due date: Flexible

3.6m Picket fence - h3 design pine 66mm x 18mm x 900mm: four posts h3 design pine 900mm x 900m plus a 1m wide gate same height Bin enclosure - same style as picket fence but 1500mm high, 700mm deep and 1200mmwide - two doors - Due date: Needs to be done on Saturday, 17 September 2022

Between private home and adjacent block of units. Balmain - Due date: Before Thursday, 30 June 2022

Hello we need a help to complete a fence timber lap and cap 6 meters approximately. All the materials on the site. Need your tools

I have an old fence with gate that I would like replaced.

A part of the medial fencing around my pool has been dislodged. To put it back in place securely it needs the right tools to attach metal to metal i.e. drill, screws etc. - Due date: Flexible

Help installing 4 x supplied galvanised fence posts to support 1.65m high fence/gates. Need someone who can dig holes, align and ensure well positioned and concreted into place. Back lane so easily accessible.

I have an old fence and gate that needs to be replaced. Picture attached.

Simple addition of bamboo or wooden on top of back fence to give a bit more privacy. Approx 80 cm extension. Painted white if possible. Or to add bamboo lattice cover to fence which extends the additional amount and paint white. It’s around 4m wide

I need a fibro fence panel replace (will need to be picked up from Bunnings)

33 Lm lap and cap fence required 2.1 high We will pull the existing one done We have a plenty of the jobs on our books We are looking for a reliable fencer with a consistent Lm rate

Hi there, I am looking for someone to come and put in a gate latch on our front gate. The vertical fixed post is 90mm wide The vertical gate post is 40mm wide x 90mm deep The horizontal gate post is 40mm wide x 90mm deep Hoping you can help. Based on Balmain (inner west Sydney) I have not bought a latch as I have no idea which one to purchase so looking for recommendations.