Find experienced local fencing contractors in Collaroy Plateau

We have a 5m frontage of jasmine vine on our property frontage through which our new dog keeps escaping. We need a chain link fence or similar installed asap to stop her getting out. It doesn’t have to be pretty, but does need to be secure.

Reattach paling on gate.

A fence has been damaged in a fire and needs replacing.

Need to put in pence pailings across 2 areas. Both areas are 7.5m long, so 15m of pailings to install. have fence pailings (2.1m) and timber battons provided to do the job, just labour and hardware to do task required.

Quotes to have fence replaced in the New Year. Like for like - timber. Approx 13m long x 1.2m high inc 1m gate Old fence will be removed beforehand.

Set 7 steel fence posts 2.4m apart. posts are 3m long. 600mm deep. in fornt of the existing timber fence

Fence attached to brick wall on bolts so it can removed with cross support (as per photo of gate). 3.5m long by 1.8 m Using h3 fence pailing And using h3 90by 45 as support Like it quoted to complete works including organising materials and using your own tools. Will reimburse for materials.

Quote to install a white aluminium fence in front of the existing timber boundary fence. Fence location - a side of the house Approx length of the fence - 15m height - 2.4m posts from the ground level; however, the land is sloped, and the ground level on the other side of the fence is lower. Fence slats or panels height 1.8m, starting 60cm above the ground level (as that will be the level of the pool being installed next month) The fence needs to be pool-compliant. Quote to install the fence with materials provided by me (after consultation). For example, from supergates website. Or supply and install.

Attach two pickets that have come loose to fence

1.8 fence - Pull down of fence/dispose of at tip. - Clean fence line - Install 50x50 gal post - Install quick set concrete for post - Install 33m fence at 1.8 high single paling fence. - Install 15 sleepers All materials will be provided

We have just purchased a house in Collaroy Plateau which is not puppy proof for our German Shepherd. The perimeter fences are dog proof but there are no gates on either side of the house. We need someone who can build two gates that are dog proof and that fit in with the timber work on the house such as the balustrade and timber slat cladding on the ground floor. We would like you to measure up the gates and agree on a design with us on the Saturday 25/5 then come back the next week to make and swing them. There may be a fixed panel required to fill the opening aswell. I won't have any photos until Saturday when we move in. The gate goes across the top of the steps with a fixed panel across the top of the drop and we want it to blend in with the slats as shown in the other pic. About 1400 to 1600mm high should do but will be guided by you. The other side of the house is same type of gate and similar size.

Need the slats/panels of the pool fence exterior turned around to meet pool fencing regulations. Existing slats, panels and fixtures all installed, so need to take our panels, turn and reinstall. Posts etc are already installed. See photos for details. - Due date: Before Saturday, 16 September 2023

Paint 3 timber fences. Approximately 30 lineal meters. fences border Neighbours property. Will need appropriate Perspex sheet to run behind fence to ensure paint doesn’t go through to Neighbours - Due date: Flexible

Supply new 900 x 1800 gate with pad bolt latch and hinges. Remove old gate and trim new gate to size. Fit galvanised hinges and pad bolt. Dispose of old gate. - Due date: Flexible

Hi I require a gate(s) replaced. Basically the one in the photo has a damaged post so is not closing correctly. As such I need: 1) An aluminium type gate setup. a. Possibly open to timber style b. Just not sure fixings will hold….. c. My thoughts are timber may be too heavy….. d. But I may be wrong & not experienced enough, so good to get advice. 2) Allows access for car to move up drive – very occasionally. 3) So cannot have a permanent middle Post. 4) Needs to be “vertical / horizontal finish” as opposed to the “round “ style in the photo a. Because we have fence in front of house which is more “ squared palings style.” Needs to match style. 5) The old posts will need to be removed.....they are cemented in to ground. 6) Current height is 1.2m approx - i possibly require slightly higher - up to 1.6M – the height is optional given standard sizings etc.... 7) Width is approx 2.7m in total from wall to side of house. Photos show: 1) gate which needs replacing 2) & fence at front of house to match style to. - Due date: Flexible

1) Need Fence built 2) typically White, Wooden or Metal, 3) Approx 9m in length 4) Possibly need to core drill for posts. UPDATE: 1) Added Photos 2) One Run - just straight.... 3) No gate - No returns or No angles ..... - Due date: Flexible