Find experienced railing contractors in NSW

Carpenter / builder or experienced handy man to replace Existing balustrade as is non AUS compliant. Not tall enough and gaps between railings are too wide. Want remodelled or replaced with something fairly similar and needs to keep/have self closing gate. Photos supplied are of existing railings and also possible styles of new ones / ideas

Manufacture and install aluminium balustrades for rear balcony Approximate measurements are 13.2 m Welded Aluminium Balustrades Powder coated - 3 x (2260 x 90mm) straight Sections - 2 x (570mm x 900mm) straight Section - 2 x (2620 x 900) stairs section All work to meet Australian Standards (AS/NZS 1170.0, AS/NZS 1170.1 and NCC2019)

Supply and installation of Balustrade Fencing or Handrail for the Garage Stairs.

Supply and install new glass balustrade and 1 off gate for pool. Approx 30 lineal metres. Allow to remove existing metal fence. Cost per lineal metre for both frameless and semi framed options

Hi Airtaskers We are looking to put up a timber / wire balustrade / fence for a backyard deck. Deck material: Tiled deck over concrete slab. Deck size: 5.9m x 3.3m (approx) The fencing is to comprise of about 9 timber posts that are 90mm x 90mm. The timber posts are to be anchored into the concrete by a bracket which has a single 10mm x 100mm concrete screw. The wires for the fence are spaced at about 8mm up the post, with the post height being about 960mm. You will need to supply all tools for the installation of the posts (eg: drills, bits, hydraulic swager, wire cutter, etc). I will supply materials. Photos posted for context. Look forward to hearing from you and meeting you! Feel free to message with any questions

Hi there, one of our glass balustrade pool fence has come down in all this wind. Need someone to re-screw it strongly to the timber again & check the other panels to make sure they are secure. Its at an airbnb in Jamberoo

There is a temporary balustrade that needs to be rebuilt. Happy for a fencing contractor or trades person to remove or build a new wall in waterproof marine ply. Or alternatively, prepared to put temporary pool fencing if it could be bolted into structure at same height. It does not need to be a clad wall, just pool fencing bolted into slab. So either reinstate existing and clad, or replace with a solid aluminum fence that is compliant. Willing to pay $500 for patch up existing or $1.5k for aluminum fencing.

Repair and strengthen timer posts (rotten at the bottom ) maybe by galvanised steel bracket between the posts and the timber deck .

We have approximately 45 meters of balustrades around our deck and two staircases that we’d like to replace with timber and steel wire balustrades, ensuring compliance with the Building Code of Australia (BCA) and Australian Standards. We will handle the removal of the existing balustrades ourselves, so your task will be to install the new balustrades based on the attached inspiration photos. Seeking a carpenter with experience in installing timber and steel wire balustrades. We can supply materials.

We have just purchased a house in Collaroy Plateau which is not puppy proof for our German Shepherd. The perimeter fences are dog proof but there are no gates on either side of the house. We need someone who can build two gates that are dog proof and that fit in with the timber work on the house such as the balustrade and timber slat cladding on the ground floor. We would like you to measure up the gates and agree on a design with us on the Saturday 25/5 then come back the next week to make and swing them. There may be a fixed panel required to fill the opening aswell. I won't have any photos until Saturday when we move in. The gate goes across the top of the steps with a fixed panel across the top of the drop and we want it to blend in with the slats as shown in the other pic. About 1400 to 1600mm high should do but will be guided by you. The other side of the house is same type of gate and similar size.

Hi there, I am needing to get a dog friendly fencing as soon as possible - 15mt in back yard and 2.5mt driveway gate. Preference for timber - style photos attached but open to other options that will make work possible sooner. Thank you!

I need someone to assess, provide and install a post at both ends of our glass pool balustrade for additional support. Metal rails need to be supported by new posts (no post at the moment). Happy to also get a quote for the post and to pay extra for it.

I require timber posts installed on existing stairway balustrade. Requires approximately 35 timber posts cut and nailed to balustrade. Approximately 850mm high posts. I will provide timber pre painted. - Due date: Flexible

18 metres in length. We will remove the existing fence and supply the glass balustrade. Just need a quote to install.

18 metres in length. We will remove the existing fence and supply the glass balustrade. Just need a quote to install.

Glass pool fence repair: - source and replace two rusted balustrades with matched new ones - source replace one glass panel with matching dimensions (shattered) - reaffix second glass panel Labour budget $500, parts extra. Due date: Before Monday, 23 October 2023

Have a baby gate in place as a temporary solution. Need a qualified professional to both SUPPLY and INSTALL a swing gate at the top of our entryway staircase. Will add measurements shortly. Please quote for materials reimbursement and labour. Post any questions and I’m happy to provide more detail. Thank you - Due date: Flexible

Approximately 16.5 metres of glass balustrading are required. Existing pool fencing will be removed and disposed of by owner. One hinged gate required. - Due date: Flexible

Approx 21 m of aluminium fencing /balustrade + 2 gates. Must be pool compliant. Supply and install - Due date: Flexible

We are looking for balustrades for the balcony which is ready to be installed. The front fence infills and gate will be ready for measurements in 4 to 6 weeks. Please call asap. Thank you. - Due date: Flexible