Find a local electronics repairer in Brunswick VIC

Pre-sale cosmetic punch-list in Brunswick. Seeking an experienced, detail-oriented handyman for a 1-to-1.5 day job. Budget is for LABOUR ONLY; I will reimburse the exact receipt cost for paint pots, plaster, and seals. PAINT INFO: Original tins are on-site. The paint inside is dried solid, but all labels/tint formulas are perfectly readable so you can grab fresh project tins easily. SCOPE OF WORK: 1. Ceiling Fan Plaster Repairs: Flush, patch, and sand flat two circular holes/rough cutouts near the ceiling/wall junction from a recent fan install. Prime and paint to match ceiling profile. 2. Wall Patch, Clean & Paint: Sugar-soap vertical condensation streaks on a bedroom wall. Patch/sand minor chips. Apply stain-blocking primer over streaks, then roll the single wall corner-to-corner using matching Whisper White for a seamless finish. 3. Bathroom Ceiling Remediation: Treat dark mould stain at edge with mould killer, dry, and seal with a stain-blocking primer. Sand a previous rough, raised plaster patch flat/flush. Roll entire ceiling with two coats of flat ceiling white. 4. Door Gasket Replacement: Remove damaged black rubber/vinyl weather seal on aluminum glass door (dog damage). Source matching profile gasket and roll into channel. File down sharp bite scratches on frame and touch up. 5. Windowsill Touch-Ups: Scrape loose, flaking paint caused by condensation. Sand smooth, apply timber primer, and topcoat with matching enamel trim paint. 6. Timber Floor Touch-Up: Lightly hand-sand greyed, worn timber threshold where dog scratches stripped the coating. Apply matching stain or wipe-on clear polyurethane to blend it back into surrounding floor. Please provide a labour quote and your earliest availability.

Install Govee Home LED strips to TV

Hi, my offer is for labour only to replace vanity taps, supply, install and paint internal door. May need a second visit for 2nd coat of paint on the door. Door and paint will be supplied and reimbursed upon completion, will use old hinges and door knob onsite. Job will start on 21st of Sept at 8am.

We have 60 office desks that we need to dismantle. You would need to remove the table tops from the exisiting legs, and then reassemble the new table tops that we have ordered onto the exisiting desks legs that we currently have.

Experienced painter available for extra jobs. I can help with interior and exterior painting, walls, ceilings, doors, trims and touch-ups. I work independently, take pride in clean and quality work, and can provide my own tools. Available for small or large jobs, including one-off projects. Available on evenings and weekends

Looking for an experienced carpenter or shopfitter to inspect and quote for a commercial fit-out job in Brunswick. Budget is negotiable. We’re currently looking for quotes and different solutions. A site inspection is preferred before providing a quote, as the existing conditions are easier to assess on site than from photos. Scope: * Enclose the gaps around an existing train carriage. * Build a timber frame (or recommend a suitable structure). * Install cladding/panels to match the existing white weatherboard wall as closely as possible. * Custom cutting required to follow the train carriage profile. * Looking for recommendations on the best materials, quote, and estimated installation time. Site inspection preferred before quoting. Please let me know if you’ve completed similar commercial or shopfitting projects.

I have an old beige Clipsal indoor switchboard at home that is functional but very dated-looking. An electrician has recently confirmed there are no safety concerns. I am looking to improve the aesthetics by replacing the switchboard cabinet/enclosure with a modern white surface-mounted enclosure. The existing board is approximately 41.5 cm wide x 27 cm high. I am not looking for a decorative cover over the top, and I am not looking to replace only the front door/facade. I would like the old Clipsal cabinet/enclosure replaced if this can be done safely and compliantly while retaining the existing breakers/components where appropriate. The job should include: 1 supply and installation of a suitable modern white switchboard enclosure/cabinet; 2 transfer/reinstallation of existing breakers/components where compliant; 3 neat labelling; 4 testing; 5 Certificate of Electrical Safety; 6 advice on whether wall patching/painting will be needed if the new enclosure is smaller than the current footprint. The switchboard is indoors and easily accessible. Please only quote if you are a licensed electrician and able to complete the work in accordance with Victorian requirements. Outcome: A clean, modern white switchboard enclosure that looks neater than the current yellowed Clipsal cabinet, without unnecessary full switchboard replacement. When responding, please let me know: 1. whether you think this can be done as an enclosure/cabinet replacement only; 2. what enclosure you would recommend; 3. whether the existing board size may cause issues; 4. whether your quote includes materials, testing and Certificate of Electrical Safety; and 5. whether any wall patching/painting would be excluded.

We got a plumber come to inspect the leakage issue from the ceiling and been told the water came from the balcony so we need to do seal the gaps between the tiles and paint the ceiling

I have a crack in the wall of my hallway as pictured that needs to be sanded back and painted over. And as you can see from photos I have patches around my laundry taps that looks uneven and also needs to be sanded and painted over. I can provide the paint which is dulux lexicon quarter

The shower head is constantly dripping. When trying to turn the taps they just skid as if they’re not gripping something.

I need a professional to assist with fly screens and a door repair at my townhouse immediately. 1. Fly Screens (Supply & Install) I need frames and mesh for: 8 x Windows (Various sizes, including one next to a large sliding door). 1 x Large Sliding Door. 1 x Set of French Doors. Note: I do not have exact flyscreen measurements. You will need to Check Measure first. See photo. 2. Security Door Repair My main security door has visible gaps in the skirting/frame that need to be sealed/fixed to stop bugs getting in. (Please see attached photo). - (Optional Enquiry/not included in quote)Added Bonus for Curtains/ Blinds installed. If you can supply/install blinds as well, please mention this in your offer! Timing: I want to get this moving TODAY if possible Please quote for the site visit/measure or provide an estimated price range.

Two split system air conditioners were installed at our property in Brunswick. At our request, the installer added a pump to each unit so the drainage water could be discharged on the rooftop, avoiding impact on our neighbours. While the solution works, the pumps are very noisy at night and are affecting our sleep. We would now like to: 1. Remove the existing drainage pump from each split system (2 pumps total) 2. Install an alternative external drainage solution that directs water to the exterior roof/downpipes You may keep the pumps which are basically new. Please see attached photos for reference. Could you please provide: 1. An estimate/quote for the full job (labour + materials) 2. Your earliest availability to attend Thank you – we look forward to your quote.

I need a replacement of the power switch on my Bose qc35.

I need 2 taps re installed as a plumber i user to take them out has told my customer he cant return until Monday. Needs to be today. easy taps good access fit iff only

Replacing flooring of house, stumps, bearers, joists. $30 p/h

Paintings that were stuck on with a 'quick release' sticky tape have ripped off the paint on several walls in an apartment as well as two dents to be fixed, all patched and painted if need be. Needs to be done within the next week or so, will lock in the best time with suitable Tasker. Ideally come in take samples to bunnings match colour, patch and paint in one day. Send me through some quotes, budget is around $600. Cheers

Repair noise cancelling headphones

Dig up two bamboo clumps, I have already dug one up and started on the other two, but need some help finishing the the job as my chainsaw is too small. Clumps have already been treated and are dead. Disposal not necessary. No direct garden access from the street.

I need a handy person to fix or strengthen a coffee table’s leg (see pic). I also need to 2 bathroom washers to be replaced as they’re leaking (see pic).

GHD straightener not working. When you turn it on, the power light flashes red, and a zap noise occurs.