Find experienced local carpenters in Maroubra Junction

1. Replace rotten timber decking boards. 2. Screw in loose decking boards 3. Fix some timber battons 4. Remove the stool and a piece of the window surround and replace with new timber 5. Other general carpentry jobs No materials are required

Timber deck repair Area with rotten boards removed and timber replaced. Stain deck darker colour to match with existing timber. Including materials and rubbish removal.

I need someone to repair my front timber door. The outside has faded, and the bottom is a bit weathered.

I need a carpenter or handyman to straighten/ align my IKEA Platsa wardrobe doors. The wardrobe is built-in with 7 large and 7 small doors on top. The wardrobe is attached to the wall hence can’t move, but the hinges can be adjusted or packed out. Wardrobe doors should all be aligned at the top and side, and ideally a constant gap around each door, Work to be done over the next week, but flexible on time. House is in Maroubra

An area of 4 sqm of decking needs to be repaired. Some under structure joists have failed over time. These need to be replaced and decking re-set.

Licensed carpenter to install 4 new internal doors and new door handles into existing door frames. Doors and handles will be supplied but may need to be cut/shaved to fit within existing door jams

There are some really stubborn fake tan stains on carpet and I can’t get them out

Remove existing timber decking and replace with new merbau decking (90x19mm) and finish deck with natural oil. Approx 20m2. Dispose of waste

remove a wooden wall (like a cabinet around 2 metres high) built before

I have a wooden table that got watermarks on it, but I would like to get the whole thing sanded back 100cm wide 240cm long 84cm high

4l rotten timber window frames need to be repaired

Repair rotten timber frame

3 Wooden coasters need to be engraved with the names in the middle.

Replacing the wood decking in the backyard

Need to stain brand new raw timber coffee table to be black (or very dark brown). Could possibly use Feast Watson Black Japan stain (from Bunnings).

We have four pine chairs that need fixing: 1. Clamp/glue 1-2 joints 2-3: Clamp/glue joints 4: Clamp/glue joints, fix chair back ( joinery skill needed) 1-4 even legs to make each chair level.

Looking to connect with a carpenter who has interest and capacity to build the kitchen and cabinetry for the back of a Toyota Hiace campervan. I'm thinking plywood cabinets with a hardwood top surface for sink / prep area, but open to ideas - get in touch!

Help make a small addition to the renovation in my van and install a lock for the roof top storage

Supply and install stainless steel wiring (horizontally) to an existing timber balustrade. The distance that needs to be infilled with stainless steel wiring from the timber handrail to the bottom timber rail varies from 750mm to 950mm. There is approximately 65 lineal meters of handrail that needs to be infilled under. THIS JOB IS FOR EXPERIENCED WIRE BALUSTRADE TRADES PEOPLE ONLY WHO ARE LICENSED. ALL WORK MUST COMPLY WITH THE CURRENT BUILDING CODE OF AUSTRALIA.