A close-up image of a carpenter sanding a plank of wood representing carpenters near me.

Find experienced local carpenters in Baulkham Hills & Hawkesbury

Fill a short form and get free quotes from local carpenters in minutes

4.3

Excellent rating - 4.3/5 (10900+ reviews)

Hire carpenters in Baulkham Hills & Hawkesbury today

  • Cabinet making
  • Custom shelving
  • Wood repair
  • Custom made furniture
  • Deck sanding
  • … or anything else
It only takes 2 minutes. And it’s free.
Up to 50% cheaper than franchise dealers
No job too big or small
Free insurance coverage
Secure cashless payments
Same day or next day service at no extra cost

Best rated carpenters near me

Recent Carpentry reviews in Baulkham Hills & Hawkesbury

Super awesome guy. Absolute gem

IKEA cabinets & benchtop (laminated) installation

$500

very fast, clean and good work. even brought in extra materials on the job without charging extra

Kitchen Cabinet Repairing

$110

Great work will use them again. Thanks

Move few cabinets & Boxes

$250

What a champ

Repair to timber eave

$250

Great job from Shamsher, high quality work! the deck looks like new! Thank you Shamsher, will work with again in the future.

Deck Stain

$230

He genuinely is a great guy. Very honest, flexible, polite and his work is very clean. Would highly recommend him.

Carpenter and gyprocker needed

$1,000

What's the average cost of a carpenter in Baulkham Hills & Hawkesbury

$125 - $550

low

$125

median

$350

high

$550

Low, median and high bar chart distribuiton

Average reviews for Carpentry Services in Baulkham Hills & Hawkesbury

based on 112 reviews

4.89

103
8
0
0
1

Best rated joiners near me

Recent Joiner reviews in Baulkham Hills & Hawkesbury

Great job Thankyou.

Carpentry/Joinery

$500

He is very honest and punctual.

Fireplace(no heat) installation with some joinery

$10

I’ll highly recommend Matt for any kind of handyman work. He did our kitchen cabinets, bulkheads, drawers and bedroom wardrobes. He is professional and came on time. He took care every little request we made. Looking forward to work with him again soon!

Kitchen joinery and wardrobe doors installation

$350

Excellent job will recommend again

Dismantle joinery

$200

What's the average cost of a joiner in Baulkham Hills & Hawkesbury

$65 - $410

low

$65

median

$194

high

$410

Low, median and high bar chart distribuiton

Average reviews for Joiner Services in Baulkham Hills & Hawkesbury

based on 4 reviews

5

4
0
0
0
0

What is Airtasker?

Post your task

Post your task

Tell us what you need, it's FREE to post.

Review offers

Review offers

Get offers from trusted Taskers and view profiles.

Get it done

Get it done

Choose the right person for your task and get it done.

Now Available
  • Get it done now. Pay later.
  • Repay in 4 fortnightly instalments
  • No interest
  • Available on payments up to $1,500

141+

Tasks successfully completed

2

Average amount of offers per task

1

 hr

Average time to receive offers

Statistics from the most recent tasks on Airtasker over the last 4 years.

What do carpenters near me do?

Whether you’re planning a major renovation on your home or you simply want to make things look a bit nicer, hiring carpenters near me for small jobs or chippy can help you with many different tasks. Carpenters use other types of power tools and hand tools to carry on building and construction work. 

Carpentry work is generally broken down into two types: rough and finish. Rough carpentry refers to work that doesn’t have an intricate look, as it’s covered up – often by bricks, tiles, or plaster work. Finish carpentry covers the work that will be on display, so needs to have a nicer finish. Furniture, decking, and window frames all fall into this second category. 

Carpenters for decking

Many Australian homes are blessed with a large backyard and plenty of sunny hours to enjoy that space. A decking specialist can add an outdoor deck or upgrade an existing one that opens up your outdoor space. This is great if you want to entertain guests or eat outside as a family during the sunny months. 

Carpenters for cabinet-making

Cabinet makers are one example of finish carpentry, because of the high level of detail that goes into their end products. Unlike structural work, it’s important that a cabinet looks nice, so this type of carpenter is a lot more focused on fine details. Cabinet makers often specialise in other forms of furniture making too. 

Refinishing carpentry

While structural carpentry is concerned with jobs on the large end of the scale, trim or refinishing carpentry looks at jobs like wood staining and removal of old finish. A trim carpenter is the way to go if you want someone to fix up your skirting boards, cornicing, or a similar aspect of your home.

Custom made furniture

A house isn’t a home without a few personal touches, and if you’d rather avoid the cookie-cutter Ikea approach to decorating your property, hiring a carpenter to create custom-made furniture can make you stand out. Whether you want chairs, tables, or a shoe rack, or even kitchen installation there’s someone nearby who can help. 

Joinery carpenters

Joinery services encompass the craftsmanship of creating and joining wood in workshops, distinct from on-site carpentry. These services range from bespoke projects to crafting timber buildings, emphasizing precision and passion. Joiners play a crucial role in interior woodwork, window and door production, and specialized construction, offering tailored and quality timber solutions.

Recent Carpentry tasks in Baulkham Hills & Hawkesbury

I m looking for some carpentry work to build a wardrobe in my house

$1,000

Gables NSW, Australia

4th Jun 2025

I need someone to build a wardrobe in my house

Wooden flooring gaps to be filled

$150

Castle Hill NSW 2154, Australia

3rd Jun 2025

Shelving removal has left gaps in the flooring Need the gaps filled and sealed with floorboard/ timber 5 gaps - about an inch in width and 14 inches length

Carpentry/handyman required

$100

Baulkham Hills NSW, Australia

1st Jun 2025

Looking for a handyman/carpenter to replace roofing structure. Standard clear plastic trimdeck roofing to be replaced. Only 4 sheets total. 2.6m x 2.6m. All materials will supplied. Disposal costs to be worked out after job and paid in cash. Should be about 4 hour job tops. Looking for handyman/carpenter to work with long term - constant work available.

Excellent communication and workmanship. Definitely will be contacting him again. Thanks

Fix height of wooden stairs for deck

$5

Baulkham Hills NSW, Australia

30th May 2025

1) i have a set of wooden steps leading up to a deck/balcony at the back of the house. unfortunately the top step seems too steep and people keep tripping. so i think the steps need to be raised higher the stairs only have 5 steps leading up to the deck. plus i would like a handrail for safety. I am happy with pre fabricated handrail that simply screws in or hand made out of timber 2) there is a separate smaller step that need to be adjusted by 20cm. 3) some of the vertical planks along the deck's railing need to be adjusted as they are wider than 20cm apart. which is non compliant. happy to meet and explain the job. I am available to do so over the weekend or during the week I will have some other bigger carpentry jobs available after this is done too (i will post some pictures tomorrow) the price is to get a quote so you can inspect and quote accurately

Cabinetry works

$500

Gables NSW, Australia

30th May 2025

We’re looking for a cabinet maker to complete cabinetry work around our in-home aquarium. Most of the main structure is already built — this job will involve finishing off the project and sourcing the remaining materials. Project Details: • Aquarium cabinetry surround (major structural work already complete) • Requires sourcing and matching materials to existing cabinetry • Final touches include paneling, trimming, and any necessary adjustments for a clean, professional finish • Design must allow for access to filtration and equipment

Carpenter: Wardrobe to be made

$800

Grantham Farm NSW 2765, Australia

29th May 2025

I need one wardrobe made 1.6 m wide by 2.4 m height. Black melamine with walnut brown doors. One brown drawer. No handle.

Carpenter to install skirting boards

$1,000

Baulkham Hills NSW, Australia

29th May 2025

Hi, I’m looking for a carpenter to install the skirting board for my house. Products should be supplied from Intrrm group (SK945B). Please quote including the cost of the products. Floor plan has been provided in photos

Wooden wall partition

$10

Cherrybrook NSW 2126, Australia

25th May 2025

Looking for a carpenter who can make this wall partition for us

Carpentry labour

$40

North Kellyville NSW, Australia

23rd May 2025

Need an able bodied person to carry materials and tools up/down 1 story for a few hours this afternoon (asap)

Fully recommend Neil to future clientel

Carpenter wooden post wall partition

$5

North Kellyville NSW, Australia

22nd May 2025

We’re looking for a licensed carpenter to supply materials, build, and install a floor-to-ceiling partition consisting of 5 wooden posts, each measuring 75mm x 30mm, spaced at 150mm gaps. Our ceiling height is 2750mm. Need finished by this Wednesday and or before. Please provide a quote for: • With staining • Without staining Additional requirements: • Must have experience completing similar jobs • Must be able to confirm a fixed installation date and commit to it—no weather-based delays or postponements • We do not have any tools on site

Build wood panel wall partition for a open space

$5

North Kellyville NSW 2155, Australia

21st May 2025

looking for a licensed carpenter to supply materials, build, and install a floor-to-ceiling partition consisting of 5 wooden posts, each measuring 75mm x 30mm, spaced at 150mm gaps. Our ceiling height is 2750mm. Please provide a quote for: • With staining • Without staining Additional requirements: • Must have experience completing similar jobs • Must be able to confirm a fixed installation date and commit to it—no weather-based delays or postponements • We do not have any tools on site

Carpenter to re install wood cavity sliding door

$150

Box Hill NSW 2765, Australia

20th May 2025

I think one of the rollers fell off attached on top of the sliding door. Just need to reinstall it

Assemble a shed in Norwest 2153 and other carpentry jobs

$600

Norwest NSW 2153, Australia

14th May 2025

Assemble a flat pack garden shed and once assembled move materials from garage including floor tiles and wood floor and other building supplies into shed. Full day of work - requires two people Also have a bathroom door that wont close - latch needs adjustment, and a loose toilet seat / toilet roll holdef

Great work great guy

Carpentry/handyman works

$500

Baulkham Hills NSW, Australia

14th May 2025

Ongoing work - daily rate $450 Typical Tasks You’ll Be Assisting With: • Deck builds (framing, laying boards, oiling) • Pergola and outdoor structure builds • Fence repairs and new fence installs • Basic carpentry and framing work • Internal fit-outs and timber repairs • Painting (walls, ceilings, doors, trims) • Skirting, architrave, and door installations • Small concreting jobs (footings, posts) • Demolition + site clean-up + waste runs • Minor plastering + patching walls • General handyman tasks as required

Carpenter to shave a margin off one or more doors.

$300

Cherrybrook NSW, Australia

13th May 2025

One or more doors do not have enough clearaqnce for new carpet, the doors must be removed and a margin shaved off then door re-hung. They are internal doors, hollow type.

Great job many thanks

Painting required to 12 internal timber stain doors

$600

Dural NSW 2158, Australia

8th May 2025

Painting 12 Internal timber stain doors. Doors need to sanded back and repainted white. I will provide the paint.

Carpenter Needed: Timber Lining for Built-in Deck Bench with Storage

$200

The Hills Shire NSW, Australia

8th May 2025

Looking for an experienced carpenter or woodworker to install internal timber lining for a fixed, built-in bench with storage, which is integrated into the deck structure. Must have experience in precision woodwork and finishing. Outer bench dimension = 300cm x 60cm PS: The benchtop lids are heavy Refer to attached pics.

Tradesman or Carpenter to saw off my Sideboard legs to reduce height

$50

Box Hill NSW 2765, Australia

9th Jan 2025

I have a WOODEN sideboard that is 99cm in height. There are 4 legs measuring 22cm each included in the height. It is too high for the space. This is simply to saw off the 4 legs and level the bottom so it sits straight so the height drops by 23cm. There are 4

Quick and accurate saw work ! Would recommend

Recent Joiner tasks in Baulkham Hills & Hawkesbury

Joiner/carpenter

$150

Kellyville NSW, Australia

27th Sep 2024

The existing laundry door comes inwards and would like it to open outwards. Door in perfect condition and would like to keep existing door if possible. There is also a fly screen which already opens outwards. Can it be moved ( and kept ) so both face outwards. Please let me know if you need more specific photos

Joiner - custom cabinet

$100

Kellyville NSW, Australia

27th Sep 2024

I need a custom cabinet for the bathroom. - 270mm Width x 640mm Height x 270mm Depth - 1x Non-Magnetic Touch-Latch Push to Open Door - 1x Adjustable internal shelve make 3 positions to install around the top 1/3 of the height - Material I propose 16mm white HMR melamine with a 1mm PVC edging - Exterior Finish: Dulux Ghosting S15A1 Matte Polyurethane or similar To make it clear how it will be used see https://www.instagram.com/reel/C-EfCHKPiLs/. Discard the top section in this video and imagine it is only the big section for toilet brush and sanitary small bin attached to the door. I will attach these items myself - just FYI.

Fix joinery

$50

West Pennant Hills NSW, Australia

1st Jul 2024

Fix the broken joinery of one cupboard door

Supply joinery only

$5

Castle Hill NSW, Australia

3rd Apr 2024

Have a few jobs that I need processed ASAP for supply only as I’ve had my supplier go overseas.

Fireplace(no heat) installation with some joinery

$10

Box Hill NSW, Australia

1st Apr 2024

I would like to install fireplace(no heat) in my niche with some joinery around.

He is very honest and punctual.

Assistance with joinery, carpentry for bathroom cabinets

$25

Baulkham Hills NSW, Australia

2nd Jan 2024

Hi there, I'm doing a bathroom renovation and am building some cabinetry (cupboard for washer and dryer as well as a vanity). Panels have been purchased. Work to be done in my garage. This is not a flat pack build. It's built from boards which will need to be cut and joined together. Was going to do it DIY but i'm behind schedule on other tasks so I need someone to help me. Experience with woodwork required. Could be a joiner, carpenter or handyman. I will provide tools and materials and will be working along with you on the project. Rate is hourly - Due date: Before Thursday, 4 January 2024

Joiner kitchen cupboard doors 3 off

$300

Wilberforce NSW, Australia

6th Jan 2023

Three doors under sink cupboard - Due date: Flexible

Need carpenter/joiner to make three doors for under kitchen sink

$250

Ebenezer NSW, Australia

29th Dec 2022

Three doors need to be made to suit cupboard under sink. I can send photos. - Due date: Flexible

Joiner /Plasterer for cieling drywall/gyporock

$1,500

Cherrybrook, New South Wales, Australia

1st Dec 2022

Cieling gyporock has broken due to water, needs replacing. Approximately 7m X 2m space. There is a void below so something to stand on will be needed. Include the cost of taking away rubbish and also sanding and painting white. Licensed and licensed and insurance in your or your company name. - Due date: Flexible - Due date: Flexible

Install a joinery door jam

$100

Cherrybrook NSW, Australia

22nd Nov 2022

I have a joinery door jam that need to be installed - Due date: Before Sunday, 27 November 2022

Install cabinets - joinery

$1,234

Castle Hill NSW, Australia

11th Sep 2022

I am looking for someone who can build/ install cabinets. 1- entertainment unit- width 3.5m approx (wall to wall) to use with an ust projector so would require a centre sliding panel so we can pull the draw / panel out when using the projector. Need one open shelf in the centre below the projector pull out panel/ draw- and all others can be pull out drawers. Proposed design attached . Happy for suggestions to make it better. Current set up photo attached. Replacing a current entertainment unit. 2 need to install wall cabinets in laundry and a laminate benchtop and side bottom cupboards as well. - Due date: Flexible

Rip out old joinery and put up some plasterboard

$500

Kurrajong Heights NSW, Australia

10th Sep 2022

Need some old cupboards ripped out of a large garage and plasterboard installed against walls. The room is c.9*9meters and about 4 meters high, cupboards along two walls, battens for plasterboard already in place - Due date: Before Sunday, 18 September 2022

Custom Rumpus Room Joinery Supply and Install

$5,000

West Pennant Hills NSW 2125, Australia

30th Jul 2022

We are looking for custom joinery to be supplied and installed in our rumpus. Total length is 6 m long with a tall cupboard for shoes (shelves inside), low section as a bench seat with 2 drawers underneath and then a long tv bench section (shelves inside). Please see picture for rough dimensions. We are looking for A 2 pk poly finish with shaker doors, sitting on a matching skirting board/plinth. Must be sturdy and be able to be used as a bench seat. - Due date: Flexible

Dismantle joinery

$200

Bella Vista NSW 2153, Australia

16th May 2022

Dismantle joinery and cupboards - Due date: Needs to be done on Monday, 16 May 2022

Excellent job will recommend again

Joinery needed for aesthetics of a reception desk

$700

Baulkham Hills NSW 2153, Australia

12th May 2022

Have the reception desk already made. Just needs aesthetics completed. Need battens added (battens will be provided) . And top shelf that runs along the side needs to be made installed. See images.

Demolition, joinery, flooring,painting

$9,999

Norwest NSW, Australia

10th Apr 2022

Demolitions, paintings, joinery, flooring -I need some renovation jobs for a cafe. Due date: Flexible

Carpenter/joiner for days labour

$250

Castle Hill NSW, Australia

30th Mar 2022

Need someone for the day to help with some basic joinery/carpentry work. Must have experience in the tools. Nothing to intense or difficult. Castle hill, 10am-4pm.

Joiner for cieling drywall/gyporock

$500

Cherrybrook, New South Wales, Australia

10th Mar 2022

Cieling gyporock has broken due to water, needs replacing. Approximately 7m X 2m space. There is a void below so something to stand on will be needed. - Due date: Flexible

Joiner / Carpenter to manufacture and install larger bookcase and desk

$9,999

West Pennant Hills NSW 2125, Australia

7th Mar 2022

Price required to manufacture and install a larger wall unit/bookcase and desk for home office fitout. Please see drawings and room photo attached. Height of unit is 2700mm Width is 4200mm approx Also price required to remove existing desk unit and relocate to another room on ground floor. Room is on ground floor, easy access. - Due date: Before Friday, 8 April 2022

Carpentry/Joinery

$500

Galston NSW, Australia

3rd Jan 2022

To erect shelves above my fridge

Great job Thankyou.