Find a reliable appliance technician in North East Melbourne

We’ve installed the Solt 90cm rangehood canopy. The model has two air suction options, one being that of the carbon filter (recirculation) another being ducted circulation out. We want price for both the options, inclusive of material and labor with both costs broken up in quote. The rangehood itself is already fixed at its place and turns on (picture attached). You need to hold an appropriate license and must have a proper business (ABN). General handyman type of experience isn’t going to cut the mark as we don’t want to lose warranty protection because someone didn’t hold the right license or wasn’t qualified to complete the installation. Roof is metal/colorbond and the house is single story. Some manufacturer instructions on this matter are as follows, noting the preferred bidder should do their own research as well. Ducted Installation For maximum performance we recommend installing with rigid or semi rigid ducting. All ducting must be fire retardant. There are multiple options for ducting the range hood, as follows: Straight up through the tiled or metal roof, using a roof cowl. Vented through to the atmosphere through eaves, using no more than 2 × 90° bends within the ducting run. Always use the correct size ducting, and ensure that it is non-flammable ducting. For maximum performance Sôlt recommends semi rigid or rigid ducting. This rangehood is designed to use Ø 150mm ducting to achieve optimum airflow performance and minimal noise during operation. For carbon filter recirculation option: Disconnect the power supply from the wall socket andcarefully remove both grease filters. Install or replace a carbon filter by gently slotting thefilter in, and turning it clockwise to secure. Place both grease filters back into position, and thenreconnect the power supply to the wall socket. Activated carbon filter can be used to trap odours.

Top fridge not working at all

Top fridge not working but freezer all good

Get the Rangehood back up onto the wall

Dishwasher replacement - simple change over Remove and take away existing dishwasher, install new dishwasher, test operation, and take away the old dishwasher for disposal. Existing connections are already in place. No cabinetry modifications required.

Gas refill in a small display fridge

Connect hot,cold water and gas line to a kitchen Bbq with sink. Need to run services through cladding wall. Easily remove cladding to run services and put cladding back. Also need to cut decking board to access waste (already provisioned) for kitchen sink which is circled in red in the attached photo. If some form of cover can be placed over pipe work leading into cladding wall, that would be preferred.

Dishwasher isn’t cleaning as well as it should. Need to service it or advise if it needs replacing.

I need a licensed worker to remove old gas heater from the wall and seal the gas

The old cooktop died out of warranty. The new one needs an electrician to connect it. It's a Bosch cooktop and the house was entirely rewired 2 years ago so it should be straightforward.

Washing machine not draining. Looking for someone to diagnose and repair if it’s a simple fix (e.g. blocked filter or drain). Please quote if additional parts are required

Stovetop broke. New one is bigger. Need hole in composite stone enlarged

We have a very small kitchen and don’t have an obvious spot for a dishwasher. One solution is in room next to kitchen- easy access to electrics but water would need to come through brick wall and perhaps drain to exterior pipe. Will purchase new DW with confirmation of install costs See photos

Looking for a general handyman to re-plug a wire a juice blender. Video instructions will be provided. Handyman with general food equipment or electrical experience is preferable. No parts are required. Estimated 30min job. Tools required: A set of Allen keys and a screw driver

I require my current oven replaced with the new one I just purchased. Old oven is hardwired - please see pics. New oven is a plug & play and only needs to be plugged in to operate. I have a single plug which supports the oven. I would need the current electrical plug to be charged to a double to be able to plug in the oven as well. The old oven needs to be disconnected from the wire board. Feel free to ask me any questions.

I live in a studio apartment and I have 2 remotes missing I have an electric bed, so I am unable to move it to check underneath It is 1 x TV remote and 1 x electric bed remote Important: You must be fit and have no trouble bending low

Westinghouse dishwasher stopped working. 2 years old.

Repair Haier fridge Fridge part not and motor noisy.

Gas heater Fault 46 has appeared on the screen. This error code happened 2years ago and it required a clean due to cobwebs.