Find a reliable appliance technician in South West Perth

Looking for an experienced appliance technician to service and inspect my Blanco BSID346X 14-place setting dishwasher in South Fremantle. The dishwasher is operational, but I'd like a preventative service and check to ensure everything is working correctly. Service requested: Inspect overall operation Check for leaks, blockages, and drainage issues Clean filters and accessible components Check spray arms and water flow Check door seals and hinges Confirm heating and drying functions are operating correctly Advise if any parts require replacement or maintenance Please let me know: Your experience with Blanco dishwashers Whether call-out and service are included in your quote Availability 📍 Location: South Fremantle

Remove the old IKEA / Electrolux oven. Install new Westinghouse oven (10amp tail).

Looking for service on a Bolens push mower, as well as blade sharpening. Reasonably low hours and never been serviced before.

The fridge is blowing warm air. It's only 4 years old. Hope it can be fixed

Just to mowe the grass in front and side of the house Type of gardening: Lawn mowing Size of garden: 50m²-150m² Has green waste bin: No

new standalone gas oven install, like for like replacement with old one. same gas connection fitting etc. New unit supplied. just install new unit and dispose of old one.

Belling dishwasher will not turn on. Have checked power point and it is working.

Need to remove existing 54cm gas oven and install new 90cm dual fuel one.

The gas hot-water system is not lighting in my rental property. I need someone to go and check on it, and try and diagnose the issue.

I want to put a slim dishwasher in my Laundry. Remove the door and also the red drawing parts (kick board, top plank and bottom) then insert free standing dishwasher in. Use the existing doors and cut offs to make a smaller double door.

Washing machine screw at cover is broken. Maybe it needs to be glued back. Cover does close.

The person who put my rangehood up never came back to finish it off, so I need the top part of the flue fitted in the cavity in the ceiling. And I would also like to have the pillar in the photo sanded back and then primed. Sanding pads and primer / painting equipment will be provided. No need to paint after the primer. Open to negotiation. Also opportunity for further ongoing handperson work.

I need an experienced solid plasterer/rendering professional to repair the outside face of an existing oven recess in my kitchen. The inside of the recess is NOT being plastered and will remain exposed brick. The work is to repair the damaged areas around the opening, including the sides and top, build up/level the surface where required, and finish it flush with the existing wall and smooth/ready for painting. This is an older brick/masonry wall, so I’m specifically looking for someone experienced with solid plaster/render repairs over brick, rather than someone who mainly does plasterboard. Materials to be included in the price. Photos attached. The job is ready to be completed now. Please provide a quote and, ideally, examples of similar brick/masonry plaster repair work you’ve completed.

Kitchen Renovation – Brick Cut-Out Required for Oven Tower I am currently having a kitchen renovation completed and we are looking to install an oven tower. The oven tower will include drawers underneath the oven, with a microwave space above it, as marked in the attached photo. To allow the oven tower to be installed, some brickwork will need to be cut out above and below the existing oven space. It is highly likely that a lintel will also be required to support the weight of the brickwork above. The kitchen company is able to supply and fit the oven tower, but they are unable to cut out or remove the required brickwork. We are arranging for an electrician to remove the oven, but we are looking for someone who can assist with: Cutting out/removing the required brickwork; Installing or allowing for a lintel if required; Disposing of the removed bricks/rubble; and Preparing the space for the oven tower installation. The cut-out can be no higher than 1900mm from the floor, and the width will need to match the width of the oven tower/frame. Ideally, we would like this completed as soon as possible from Thursday 6 August, as the kitchen renovation is expected to commence from Wednesday 12 August. I am based in Palmyra and would be happy for you to come and inspect the job beforehand if that helps.

1x washing machine Need a plumber to assist with plumbing it in new apt Pickup location: Applecross WA 6153, Australia Drop-off location: Belmont WA 6104, Australia Removals size: A few items Stairs: No

I have an old dishwasher that needs to be removed and replaced by a new dishwasher. The new dishwasher is a Haier 300 series free standing DW model.

Under the basin, where the washing machine attaches- is leaking water

Isolation valve to dishwasher isn’t isolating. Need a new one, I don’t trust me unscrewing this from the copper pipe. I have a new valve already.