Find a reliable appliance technician in Palmyra WA

Kitchen Renovation – Brick Cut-Out Required for Oven Tower I am currently having a kitchen renovation completed and we are looking to install an oven tower. The oven tower will include drawers underneath the oven, with a microwave space above it, as marked in the attached photo. To allow the oven tower to be installed, some brickwork will need to be cut out above and below the existing oven space. It is highly likely that a lintel will also be required to support the weight of the brickwork above. The kitchen company is able to supply and fit the oven tower, but they are unable to cut out or remove the required brickwork. We are arranging for an electrician to remove the oven, but we are looking for someone who can assist with: Cutting out/removing the required brickwork; Installing or allowing for a lintel if required; Disposing of the removed bricks/rubble; and Preparing the space for the oven tower installation. The cut-out can be no higher than 1900mm from the floor, and the width will need to match the width of the oven tower/frame. Ideally, we would like this completed as soon as possible from Thursday 6 August, as the kitchen renovation is expected to commence from Wednesday 12 August. I am based in Palmyra and would be happy for you to come and inspect the job beforehand if that helps.

Gamma Hair Straightener, less than a year old. Think it needs new cable, was working sporadically until a few days ago.

Require Miele seal repair or replacement for a front loading machine which is now leaking. Would love to get this repaired as soon as possible, as we have young children and a high rotation of washing!

Built in ice machine not working , there’s a cable that has fallen out

Dishwasher has worked on and off. Make- Bosch. Need fixed asap.

My coffee machine pressure keeps going too high and coffee doesn’t come out. I’ve tried de scaling, and changing grind sizes / measure, not nothing works, dial goes in black bit shown and no coffee comes out, suspected issue with pressure valve.

Reverse the doors on a new LG-420 fridge. Must be experienced

Hi there, Just need someone to check if the bench dishwasher have any leaks. It has been som water underneath and unsure where its coming from. Also, fix the tap in the kitchen pouring water, it’s leaking slightly on the sides as seen on the picture and I am unable to fix it. Cheers Bjorn

2 of the elements in my electric cooktop don’t work. The other 2 work ok I’m hoping for a second hand cooktop replacement Thankyou

I have 1 remote control to open my carport door. I need a spare Thankyou

Easyshed install Tall Gable Model. ETG S2323: 2.25 x 2.25 x2.35

It runs have dismantled plastics and tank unbolted starts runs but between 4/7000 rpm sputters like a motha. I dropped it but was not running hit ground softly. I was holding it it was running fine and just shit itself. Wouldn’t rev

Connoisseur 4 burner bbq with side burner

Just need to check a gas and water line

I need a washing machine specialist familiar with Fisher & Paykel to fix my Wash Smart model. It consistently shows a “no tap” error around the 30-minute mark. We’ve tried cleaning components, swapping hoses, and all online suggested fixes, but the issue persists. Looking for someone confident in resolving this problem.

I need someone with experience repairing appliances to open and remove a blockage inside my air purifier. One of my kids drop something like string inside and I can’t find my way to the fan. I have stripped a couple of screws, making Access a little more difficult. I’m sure for an experienced electrician or appliance service person This will be an easy job. I can’t believe they made this thing with a fan that is so difficult to access.

Re string/wire clothes line

Gas stove is faulty. Have purchased new Omega replacement, require licenced gas fitter/plumber to fit and fix new system. Omega oven light is also faulty, require new bulb?

Just need a cross trainer set up not sure on the power connection very much appreciated

Need plug put on the power cord. And gas igniter checked.