Hire reputable rangehood installation and ducting services in NSW

Help install the rangehood provided and dispose the old one.

Ductless rangehood installation underneath cabinet in the kitchenfor an apartment. Rangehood already purchased

I recently purchased a integrated rangehood to install in my kitchen above the oven. The older rangehood was a slide out model. I would like the cabinet to be adjusted to allow the newer rangehood to fit in. It will require the bottom shelf (that is fixed) to be removed and to install a new shelf with a cut out for the rangehood to clip onto. New brackets may need to be installed to keep the cabinet box rigid once the bottom shelf is removed (or any other method). https://www.westinghouse.com.au/cooking/rangehoods/wri515sc/

Install fixed 60cm rangehood

supply and change switch of - Fisher and Parker range hood model HP60ICSX3

Remove and install new rangehood 60cm

I’m looking for a licensed electrician to: Remove and take away the old rangehood Install a new canopy rangehood Ensure it is properly secured and vented

I need someone to install Rangehood Inside the wall to the other wall so we can do another drop seating underneath

Need to remove old range hood and replace with new one .

Supply and installation of a new ducted rangehood

Need a hand with installing these IKEA items; rest of the kitchen is done

I just purchased LG 60cm Canopy Rangehood (BWH607T3S) and LG 60cm Induction Cooktop (BCI607T4BG). Looking for an installer to take out my old rangehood and gas stovetop and install newly purchased ones. Have checked the cabinetry dimensions on stovetop and it's fairly easy, save for needing to cap the existing gas line (as I'm disconnecting my gas soon and moving to all electric). Rangetop may prove more difficult as may need to jigsaw cut the cabinet shelf already there and the connect into the exhaust. I expect it to be fairly straight forward and could attempt on my own, but would prefer an expert to to the gas disconnection more than anything. Any help would be greatly appreciated.

Install 60cm slide out rangehood

Installation of a new rangehood. It is recircualtion and the old one has been removed .

NB: This job is to investigate options, evaluate etc, installation would be seperate based on those options. Looking for someone to investigate feasibility & suitable path for a rangehood ductwork retrofit (assumed 200mm compliant flex ducting would be necessary) - ideally with an external motor for noise & performance. We are renting, but this current one is a joke, it does nothing, and makes all the noise in the world, and everything ends up inside the house. Need someone to be able to evaluate whats behind the walls / roof cavity, clearance and pathway (see the photos for proposed pathway) The challenge is the kitchen is in the middle of the lower floor (2015 build, 2 story concrete slab) - the existing pathway of 100mm ductwork is a joke (and non-compliance) - it drops from 200mm immediately down to 100m PVC at the existing rangehood, yes standard PVC, you read that right 😳.....then a run of at least 10-12 metres up, across, down, across to outside..no surprise it does barely anything) Need to evaluate what room there is for a more direct path below the second floor slab etc - so need the right inspection devices and/or can open a port inspect then patch.

Im purchasing this range hood in the pictures, want someone to install it above the bbq and duct it out of the roof.

wall mounted rangehood installation

Install Rangehood 60 cm Fixed Rangehood

Removal of old and install of new 60cm slide out rangehood

Expose ducting in ceiling Install 2x range hoods Connect range hoods to ducting