Book a trusted oven repair and installation expert in Camberwell

Tighten oven door Check temperature control

Smeg 600Mm inbuilt over door need to readjusted. The outside door glass of oven came off. Needs to readjusted. I will require someone with special skill with patience to fix it. - Due date: Before Tuesday, 12 September 2023

The oven door has completely come off, so need someone's assistance with fixing the oven door; so we can close the oven going forward. - Due date: Flexible

Reposting and apologies to those who previously put in quote, we had some family things come up unexpectedly. Have removed drawer system under my stove top to allow for electric oven to be installed. The gas connection for the stove top is slightly in the way and just needs an extension to be attached to move it back another inch or so, this will allow oven to be installed (Not part of the job). Also needing our new fridge to be plumbed for ice. We have good under house access where you can stand up etc right underneath the fridge area. - Due date: Flexible

A new oven has replaced an old oven. The new oven is slightly smaller, leaving small side gaps and a ~14cm high gap at the top. See photos. I want someone with good woodworking skill to hide the gaps, so it looks good. It could be a flush fit or proud fit. I don’t mind, as long as it looks good. I prefer that the price includes materials. That’s all. I’ll can paint it, if required. Or, you could do it. Just let me know so I’m comparing apples with apples. I can also help you remove / replace it if you’re a sole worker, and you need a hand. It’s already electrically connected with a cable that’s long enough to remove it without needing an electrician. If you want the installation guide, go to www.westinghouse.com.au/ and enter the product code WVE625SC. It’s not urgent, and am flexible on timing (including if you have an unexpected gap - I can probably use it). However, not this week (19 to 23rd) or weekends. And prefer to avoid evenings (to avoid normal kitchen use times). - Due date: Flexible

Have removed drawer system under my stove top to allow for electric oven to be installed. The gas connection for the stove top is slightly in the way and just need a elbow to be attached to move it back an inch or so, this will allow oven to be installed (Not part of the job). Please see pictures for gas connection. - Due date: Before Sunday, 25 September 2022

I need someone to weld an oven door together. Steel plates are 2mm pieces with a 3mm face plate. The door will be stuffed with fibre ceramic blanket and welded shut. Person will need to bring own welder. - Due date: Flexible

Remove existing oversized oven 1270h x 600w and prepare cavity for new std size oven 600 x 600 and make good surrounds. Open to suggestions- if possible match existing timber panels, stainless steel trim, or potentially split existing cavity to allow microwave to lessen blank panel space. Please state if your quote is with or without electrical s (either is fine). Negotiable on price - looking for a quality job please from skilled tradesperson. - Due date: Flexible

Installation of a Fisher & Paykel Oven and Induction cooktop. New oven / cooktop. Induction Cooktop, 4 zone, Series 9. - CI604DTB4 60cm Electric Stove, 11 Functions. Series 9 - OB60SD11PB1 Old system: Gas stove top with shut off valve. Electric oven. Double GPO at rear of oven. Joinery opening Suits oven. May require 5mm to be shaved off laminex bench top for stove top. - Due date: Flexible

Reconnect the electrical part of the gas stove and oven - Due date: Before Monday, 11 April 2022

Hi, I need to repair my Smeg oven model SAC561X, the fan is working but it's not heating, thanks

I have a Lofra oven which stopped heating last night. Guessing the heating element has failed. Model: LEF9EG.3SS

Flush install new electric oven in existing cavity and wire in to existing junction box. Packing materials to centre and anchor previous oven still in place. Will probably need to be modified or replaced to suit new oven. Previous oven (pictured) was mounted proud but the new oven can be mounted flush. Cavity (pictured) is 600 x 600 and plenty deep enough for the new oven. Note the junction box where the wiring was joined by those top-hat connectors. I could do this job myself but am not a qualified electrician, important for insurance. You need to be able to show qualifications. It's a standard 600 x 600 mm wall oven. Actual height and width of fascia is 595 h x 596 w (x 572 d) mm. Depth of cavity is 623 mm -- plenty. Carcass of oven is 580 h x 560 w. Existing packing is thin 3.5 mm strips of MDF. Existing anchors either side of cavity are 17 x 70 x 600 mm MDF. Existing packing can be reused. - Due date: Needs to be done on Wednesday, 17th Nov 2021

Ilve oven model 948SXMP hinge on door needs replacing/fixing - Due date: Flexible

Handyman needed for the following tasks: 1. Replace an old oven with the one （removed from my home, but it's still very new）, the current old style oven is about 98cm high, while the new one is 60cm, so some carpentry and paint work will also be done to make good (refer image for current oven location) 2. Install a 60cm x 30cm slide-out range hood and current overhead cupboard will be altered to suit and make good (refer image for current overhead joinery, at where the picture is hung) 3. Install an exhaust fan to laundry 4. Install an external door to garage, a door frame (approx. 2.1mx.0.86m, measured from outside) is there, and add a lock as well (Bunning's door as shown is good enough) 5. A small area of timber floor (approx.. 45cmx60cm) needs to be fixed, material to match existing Those are the main tasks, also got several small handyman jobs, which could be discussed on site. Hope the jobs could start ASAP. Partial quote for items 1-3 is also welcome. - Due date: Before Friday, 19th Nov 2021

Need 60cm bosch oven installed and old oven removed. Regulator is in the way and oven can not fit all the way back. Need to alter gas line to reposition regulator for oven to be installed correctly. - Due date: Flexible

Base and Wood fired oven that needs to be built and assembled. Skills needed are concreting, laying bricks, applying mortar neatly internally. diameter for external wall : 1500

Purchased an electric oven that we need set up in the cavity. Oven is an Electrolux (EVE614SC - photo installed). Need a licensed electrician to - install oven in cavity (no need to place any cabinetry around to fill the space) - create a dedicated oven circuit protected by a 16 amp RCBO 1 termination at switchboard (photo of switchboard attached) - provide certificate of electrical safety. Thanks.

I have an old gas wall oven which need to be removed and the gas to be disconnected. Need a gas plumber who can disconnect/shut off the gas as I will be installing an electric oven. I will remove/dispose of the oven.

Need a qualified electrian to install a new 15amp power point for a oven in a kitchen renovation. Will also need to install a new circuit breaker to fuse box to facilitate this appliance. New line will need to run up to ceiling and inside of roof to the fuse box.... approx 10m worth of cables...