Hire a trusted gas oven repair service in VIC

Swap Westinghouse underbench gas oven for another Westinghouse gas oven

The knob on the oven is stuck and won’t turn off. It will still push in and turn to turn the temperature up (has about 90deg rotation) but gets stuck moving into the up position. Have already tried lubricating and turning with pliers with no luck. Appliance repairer required. Brand Chef

Old Gas oven needs disconnecting the gas and electricity to it.

I am abolishing the gas connection at my property and need to disconnect the existing freestanding gas oven and stove cook top prior. The gas abolishment is booked for Thurs 27/8, would be ideal to do it tonight Tues 25/6 or Wed 26/6

We require a licensed and insured gas fitter to attend a residential property in St Kilda to safely disconnect an existing 54cm freestanding natural-gas oven and stove. Scope of work: Disconnect the existing appliance from the gas supply Safely isolate and cap the gas connection Test the connection to confirm there are no gas leaks Leave the existing appliance ready for removal by the new appliance delivery team Provide an invoice and evidence of the appropriate gas-fitting licence Provide any required compliance documentation following completion The appliance does not need to be removed or disposed of, as this will be handled separately by the delivery team. Please include all labour, materials and Airtasker fees in your offer. Kindly also confirm your availability and whether you can return on a separate date to connect and commission the replacement gas appliance. We will need you to re-attend the site to connect the new appliance - Westinghouse 54cm Freestanding Gas Cooker + Grill - White Model: WLG510WCH Ipn: 835081 Quote for both in the comment!!

Looking for quotes from a licensed gas plumber/gasfitter. Job is to disconnect an existing 90cm freestanding gas cooker and install a replacement 90cm freestanding cooker, yet to be purchased. Current cooker appears to be gas. Replacement will likely have a gas cooktop and possibly an electric oven, so I need advice on whether an electrician is also required. Quote to include: Disconnect old cooker Connect replacement cooker Check natural gas/LPG compatibility Leak test and safety check Advise if new hose/regulator/fittings are needed Compliance certificate if required Location: Ferntree Gully VIC 3156. Please only respond if licensed and able to provide licence/compliance details.

Need a licensed plumber to connect the gas cooktop, built in gas oven and sink mixer. Need a COMPLIANCE CERTIFICATE ($50) for the gas connections. Job needs to be done around 4:30pm today.

Need a plumber to connect the gas cooktop, built in gas oven and sink mixer. Need a compliance certificate for the gas connections. Job needs to be done ASAP. Please enter your offers

*Items still waiting for delivery confirmation so don’t have a locked in date currently* We are looking at replacing our freestanding combination Gas cooktop & electric oven with a freestanding induction cooktop/oven as well as replacing the current canopy rangehood with a newer model. I believe we will need the cabling updated for the new oven as the current connection is 240v. The gas connection will also need to be capped as well. Please let me know if you can do both the electrical & gas work and what you would quote to complete the above. Photos of the current set up, CB and new equipment attached to post Thank you!

Disconnect gas oven. Must provide compliance certificate Do not need to remove appliance

The ignition does not work in one of the burners

Hi we are in Blackburn. We need a plumber to remove our existing chef freestanding oven and install a smeg FS61XNG8 freestanding gas oven. Upon installation, required a certificate of appliance.

Hi, I’m looking for a licensed plumber to swap our existing 900mm freestanding gas oven in Rosebud (3939) in for another one. The job involves disconnecting the existing gas oven and installing another 900mm gas oven in the same location. The current oven is connected via a copper gas pipe, and I want the new oven to be connected to the existing gas supply.

The metal valve stem has become “dislodged”. This is the part directly under one of the control knobs of my smeg gas oven. As a result that particular hob doesn’t ignite and can’t be used. The other 3 hobs work. I’d like the faulty part fixed or replaced. Price is only indicative. Feel free to quote.

I'm looking for someone experienced with gas ovens to inspect and repair my Royal Coordinate Series (Chef) gas oven. The cooktop burners are working perfectly, so the gas supply to the cooktop appears to be working fine. However, the oven itself will not ignite. It hasn't been used for a long time, and when I recently tried to use it, I turned the oven control knob and attempted to light it with a long gas lighter, but it didn't ignite. I'm not familiar with operating this older gas oven, so it's possible that I'm simply missing the correct ignition procedure rather than there being a fault. Before I engage someone for a repair, I'd appreciate it if you could let me know if there are any basic troubleshooting steps or preliminary checks I can safely perform (for example, whether there's a safety lever, ignition sequence, or gas control that needs to be operated). If the issue can't be resolved through these checks, I'd then like someone to inspect, diagnose, and repair the oven. If a visit is required, please let me know: Your call-out fee. Your estimated repair costs (where possible). Your experience working with older gas ovens. Photos of the oven are attached.

Install a new gas oven in a house

I'm getting this oven https://www.binglee.com.au/products/54cm-freestanding-cooker-with-conventional-oven-white-cfg503wch?ref=GizhMQ and need to install it. You need to be a certified gas fitter. Only $200 is what I can pay.

Oven not staying on when on low setting

I need help with installing a freestanding Chef Select oven at a property in Ferntree Gully. It’s a gas unit, so it will need proper connection and testing to ensure everything is working safely. I’ve attached photos for reference. Ideally, I need this completed by Monday if possible. Please let me know your availability and a rough quote.

We need assistance connecting a gas oven to our electrical -Attached is an image of the wiring diagram for the oven (10 amp plug) -Main switch board of the house is full, require an individual switch installed -10 amp switch install, baseplate already in wall with no power connected , alternatively happy for it to be hard wired, whatever is easier. -kitchen back directly into laundry with easy roof cavity access directly behind the oven.