Find a reliable appliance technician in Sydney Northern Beaches

Curved Treadmill is giving incorrect readings. Monitor is working and turns on however the readings it displays are incorrect. Speed, distance, watts are all wrong.

I’ve had a my old washing machine delivered but the removalists couldn’t complete the installation and told me I need an handy man to connect the hot and cold water. I’m not sure exactly which part is required or I have exactly. I need someone experienced with washing machine installation/plumbing to: • Inspect the existing water and waste connections • Work out exactly what hose/extension/adaptor is required if it is required • Purchase the required part from Bunnings (I will reimburse the cost of parts) • Connect the washing machine properly • Secure the waste/drain connection so it cannot leak or come loose • Connect the water inlet • start test cycle/ check thoroughly for leaks Washing machine is already delivered and in position. Please bring appropriate tools. Photos of the existing setup are attached.

Electrolux EWF14012, 6 years old Has been working, but would stop every 2nd or 3rd wash saying "check the tap". So I disconnected the hose and checked it and put it back on, and cleaned filter and all the cleans that were recommended in the manual. Couldn't see anything. But now it leaks when we do a wash. Does not appear to be coming from hose inlet. Coming from under the machine.

Replace the washing machine seal. We can either order the new one or you can do it.

I want to connect a washing machine. There is already an inlet connection available for it as circled with a tick. We need to split the outlet connection which is current in use by the dishwasher. The dishwasher is already next to it and it is a connected to the existing inlet and outlet piping. Also need to replace the shower head in the bathroom

Need to repair a Devanti Ice Machine with Error showing E1.

I would like to replace an existing bayonet gas fitting on a wall. The room it is located in has a lingering small gas smell so I believe the existing fitting maybe be leaking through a seel in it etc . Price is including the new bayonet part/ or if the current one can be sorted that’s fine aswell.

The washing machine will not complete a wash and then won’t drain This is only 5 years old - everything is working it’s just buzzing out near the end of the wash and then not emptying

Repair a tennis ball machine. It might be an electrical or wiring issue. It turns on sometimes and then turns its self off. Currently it can’t won’t turn on. It’s an old machine and wires might be disconnected or need replacing

Breville machine is in good condition but a few years old now and needs a professional service.

Please collect the new oven from St Ives and bring it to Freshwater. Remove the old oven and install the new one. Dispose of the old one. New oven weighs about 100kg. The new oven has been used and will be disconnected ready for collection. Access is ground floor with no steps at both locations. Please allow to connect gas and electricity or clarify if you can’t. Date: in mid August. 1st image is the old oven, second image is new oven. Both are 90cm wide.

The dishwasher is dripping from the very bottom (right hand side). Gasket appears okay.

licensed gas fitter: 1. Confirm the outlet is still connected to natural gas. 2. Pressure-test the bayonet valve for leaks. 3. Replace the bayonet socket if it’s worn. Advise best heater for house and install

Licensed plumber required Decommission/remove gas outlet, close off and put beneath floor. Close off pipe which has been accidentally cut and runs from the mains (pipe is black plastic) Located in Balgowlah.

Have a E18 error on Bosch Washing Machine which means the water can’t drain at the bottom end of the cycle. The filter is jammed and won’t unscrew, so the machine need so to be pulled apart. There are instructions here https://youtu.be/v-IPiVFEGPQ

Scope: Disconnect existing damaged glass cooktop, wire in and install the new replacement unit. Benchtop Cutout: No cutting or modifications required. The new cooktop is an exact size replacement for the existing cutout. Materials: I have already purchased the new Westinghouse cooktop. You will just need to supply your standard tools and any minor electrical consumables (wire connectors, etc.) if required. Disposal: Please include the removal and disposal of the old broken cooktop in your quote. (Alternatively: I will handle the disposal of the old unit myself.) Requirements: Must be a fully licensed electrician and able to provide a Certificate of Electrical Safety / Compliance upon completion. Please bring your own tools and safety gear. unit is: WHC643BE

Replacing like for like cooktop. Need a qualified electrician to do the job

Washing machine needs cleaning and service including replacement of rubber drum seal. Will pay for seal in addition to prices job. MODEL NUMBER: WWF8024M5WA Job on either Tuesday 2 June or Friday 5 June.

Remove old rangehood from kitchen and install new one. Already purchased. LG 60cm T-Shape Rangehood with ThinQ Auto.