Find a reliable appliance technician in Outer West Sydney

Remove old washing line and concrete and install new washing line in its place

The roller shutter only works via remote control, i want it to have a manual override in case power outage

Requesting quotes: Gas to Ceramic Cooktop Conversion (Sydney) Job Title: Remove Old Gas Cooktop & Install New Ceramic Location: [St Clair, 2759,Sydney] Preferred Timing: [ready to install but flexible with time, preference weekends] Details and Requirements: I require a fixed-price quote for the installation of a new ceramic cooktop. * Existing Cooktop: Currently installed, old gas cooktop. * Gas Status: There is NO ACTIVE GAS CONNECTION . * New Cooktop: A 60cm Ceramic Cooktop (approx. 6.0kW, e.g., Haier/Bosch) will be supplied by us. We need suggestions on to buy the ceramic cooktop. * I have attached photo of Consumer Unit Required Work Scope: 1. Removal: Safe removal and disposal of the old gas cooktop unit. 2. Electrical Installation: Run and connect a new dedicated 25-Amp circuit from the main switchboard to the cooktop location, including the required circuit breaker and isolation switch. 3. Appliance Installation: Hardwire and securely install the new ceramic cooktop. 4. Compliance: Provide a Certificate of Compliance Electrical Work (CCEW) upon completion. Critical Fitment Requirement (No Slab Cutting): Please note: I require your professional guidance to ensure the new ceramic cooktop fits perfectly into the existing bench cutout to avoid expensive cutting/modification work on the slab/benchtop. * My gas cooktop measurement (20.5 x26 inch) * Request: Please suggest a specific Ceramic Cooktop model that you know will fit this hole

Using Beko BFL7510 front loader washing machine.Water is not draining from the machine and door is locked. Need to check if there is any blockage inside the outlet of the machine.

I can do this job myself if I had the muscles, I require to remove the existing oven and grill out and put the new oven in. I can do the electrical part if you are not an electrician. And I can close the existing gaps using a plywood.

I bought this Westinghouse wall oven as an ex-display model. It is new and just placed in the hutch. The displays work fine. It just won't heat the main oven or the grill. Wouldn't think it's the element a it's never been used. No warranty for this so would be great to have it fixed by Christmas as I hope to be using it. The model is Westinghouse WVE6565

Service lawn mower Can’t get it to start 2 year old needs service

I need someone to collect and exchange two (2) empty 9kg gas cylinders from the BP service station at Cnr Castlereagh Rd & Coreen Ave, Penrith NSW 2750, and deliver the full cylinders to my address at Unit 2, 123 Coreen Avenue, Penrith NSW. The BP service station is approximately 750 metres away (about a 15-minute job in total). Cash will be provided for the gas cylinder exchange at the service station. No installation or connection required. Pickup and drop-off only. A suitable vehicle is required to transport gas cylinders safely.

*Isolate all gas and power supply to property *carefully remove existing gas oven from cabinetry *remove all necessary valves and flexible hoses *clean all surrounding areas to insure safe and hygienic *supply and install all new gas valves and regulators for appliance *supply and install brand new Westinghouse 60cm gas oven *reconnect all piping and electrical to new oven *reinstate gas and power to property *preform gas drop pressure test and purge entire property to insure no air in gas line *test and commission all works to insure correct function and leak free *dispose of old oven and all waste accordingly

I need a rotary type clothes line installed and an old one removed, and taken away.

One of the burners has a start up issue, another burner the flame is yellow not blue.

Repair a shark vacuum cleaner. Don’t know what’s wrong.

We have 4 security cameras already programmed, need help with cabling and installation at my home single story house with tiled roof.

My automatic rainwater pump controller (green “Automatic Pump Control” unit) is showing a red Failure light and the pump won’t start even after pressing Restart. There is power to the controller, but the pump does not run at all. The system includes: • Rainwater tank supply line • Automatic pump controller • Pressure tank/accumulator • Electrical control box next to it Looking for someone to: • Diagnose why the pump won’t start • Check power to pump and controller • Check for air leaks, suction line issues, or pump motor fault • Repair or replace the controller or pump if needed Check and activate rain water sensor Location: Bligh park When: As soon as possible Access: Easy outdoor access beside house Please only respond if you have experience with rainwater pumps or plumbing.

Leaking fuel from air filter Lawn Mowers is otherwise working perfectly. 10-12 years old

Installation of a hard lid to our 2021 model Hilux. All brackets, parts and fixtures provided. Note: You would need to have your own tools for the installation.

Put together this machine

Looking to have a 6stage RO water filter installed with tank under sink and a new faucet (all items are ready, just need installation). Dishwasher installation. Need drilled through kitchen kickboards and connected to undersink. Will need right extensions and connectors.

Drying is making a overly loud weird sound something to do with the spinning thing inside I’m assuming very annoying and needs fixing wish I could upload video of the sound but can’t

I have an existing cabling setup for 4 channel nvr with 4 cameras need to reconfigure