Hire a trusted appliance repair service in QLD

My saw just stopped working years ago..still in good condition ..need it repaired and SERVICED..need to cut treads and numerous 200 mm sleepers

Washing Machine turned off during Drum Clean and won't turn back on. Standard troubleshooting has not worked. Need to be reviwed and fixed. Experience/Expertise in Washing Machine repairs required.

My LG dishwasher door has broken where I believe its the spring or cable. When opening the door slams open so cannot be left ajar.

generator wont start No electrical switch working

The microwave is not heating up

Hi there, Our Samsung 7.5kg Eco Bubble (Model: WF0754W7V) suddenly stopped working mid-cycle right at the 20-minute mark. The Issue: The display screen works fine, but the machine stopped running. What we need: A reliable technician to diagnose the problem. If it is a simple fix (like clearing a blocked pump or unblocking a hose), please include the labor to repair it. Location: Waterford West, QLD 4133.Budget: $125 (Includes the call-out fee, diagnosis, and repairs that don't require new parts).

Dishwasher is not working - dishes aren’t ever fully cleaned.

1 side of the oven door has come off so the door cant be fully closed.

I have a Bosch washing machine that is showing error codes E35 and now E30-10. I’ve checked the pump/filter and there doesn’t appear to be a blockage. I was able to run a drain cycle, but it finished with E30-10. I also manually drained some water, and some water got underneath the machine. I need the machine assessed and repaired,

I need a local handyman or appliance tech to fix the plastic kick plate on my Bosch Serie 6 dishwasher in Nundah. The dishwasher works perfectly, but the kick plate has slipped out of its top tracks and is leaning forward. I need someone to safely remove the panel without breaking the plastic tabs and clip it back into its tracks properly. Should be a quick 10-minute job for someone with the right knack or tools.

My washing machine is having trouble draining. It stops with 18 mins left and comes up with an error E13.

My Samsung 8.5kg front-load washing machine is not draining. Model: Samsung WW85T504DAE/SA The machine shows “Check drainage / Clean drain filter.” I have already completed troubleshooting with Samsung Support: Drain filter has been removed and checked — it is completely clear. Pump impeller can rotate and does not appear to be stuck. External drain hose is not kinked. I disconnected the drain hose from the household drain and placed it directly into the laundry sink, then ran Drain & Spin. No water came out. A large amount of water remained inside the machine and had to be manually drained through the emergency drain hose. Samsung Support has advised that the washing machine now needs to be inspected by a repair technician. I am looking for someone experienced in washing machine/appliance repairs, preferably Samsung, to diagnose the problem and repair it if the cost is reasonable. Please let me know in your offer: Whether your offer includes diagnosis/call-out. Your labour cost. Approximate additional cost if the drain pump needs to be replaced. Whether you have experience repairing Samsung washing machines. Please do not replace any parts without confirming the total cost with me first. Location: Calamvale, QLD Flexible with time.

Hi - after an appliance repairer to fix oven handle and put together cupboard.

I am getting error code 36 (drainage issue )on my Serie 6 Bosch washing machine most washes, meaning I have to run additional cycles until it eventually clears.

I have a second-hand top-loader washing machine that is leaking water from underneath during use. I’ve opened the machine and traced the leak to the drain pump area. The black internal drain hose and/or the connection where it attaches to the pump appears to be the likely source. The pump area is getting quite wet. I have clear photos of the underside and suspected leak location that I can provide. Looking for someone experienced with washing machine/appliance repairs who can: * Confirm exactly where the leak is coming from * Repair/reseat the hose and clamp if that’s the problem * Replace a small hose/clamp if required * Check that it no longer leaks before finishing Location: Cairns The machine only cost around $100 second-hand, so I’m looking for a simple economical repair rather than spending hundreds replacing major components. Budget: $70 — happy to discuss if a small replacement part is required.

My front load washing machine is leaking,It might be because of the seal has been damaged Model and the damaged seal can be seen on the photos provided. Provide your route with and without the part. The Washing machine brand is Haier. Thanks.

My rangehood and induction cook top are not working and need fixing or replacement. 2 of the hot plates don’t work at all, and the others can only use one at a time. Rangehood just clunks loudly when turned on something is very wrong with it. Looking for someone qualified who can help me with this job please.

Have a slow (but constant) leak coming from the dishwasher! Have turned off the tap ( in picture) but still leaking.

Error E:15 on Dishwasher.

I have a smeg toaster that the cord thay the head needs to be replaced, as well as a Murphy Richards ice makers cords that need to be replaced. Cords are supplied to be fitted.