Hire trusted appliance installation services in North West Melbourne

Disconnect gas cook top and install induction. That is already ready but need to put plug

Install Westinghouse WRR904SB (90cm slide-out, stainless steel trimmed front, model WRR904SB). Location: Under-cabinet recessed space (IKEA-style cabinetry). Measurements: Recess opening ~890 mm wide; available depth 300 mm; height clearance sufficient (product height 175 mm). Mounting: Slide-in under-cabinet fit (secure to cabinet sides/top/bottom with screws/clips; removable front fascia for integration if needed). Ducting: Rear venting required (no top space available). Hood has rear duct hole option (120 mm diameter outlet). Connect to existing angled rear vent path Install new WRR904SB (I will supply the unit). Connect rear ducting (Hood has rear duct hole option (120 mm diameter outlet). Connect to existing angled rear vent path (trapezoidal, narrowing to ~140 mm with 160/140 mm sides). Use 120 mm (or 125 mm with adapter) semi-rigid/rigid duct, short elbow/bend, clamps, and foil tape for airtight seal.) supply install ducting part or can purchase the required before install Power: to be connected by installer

install support chains to 90cm dual fuel upright stove

Having a few issues installing a washing machine. Looking for someone with plumbing experience to come and assist hooking it up. Based in a warehouse in Coburg, needs to be within office hours today (Friday 16 Jan) please!

Hello, I have purchased a new smeg electric cooktop and need the new one installed. I have the new cooktop delivered and ready to be installed. I need this done asap if possible.

Connection to power source and install of hanging heater. Centred to beam.

We’ve got a Hobart 504 commercial dishwasher at Piano on Evans that just needs someone to get it over the line. It’s about 6 years old, was tested before we bought it, and we’ve got the receipt — so we know it works. We’ve had a crack at installing it ourselves but have hit a bit of a roadblock and need someone with more experience to step in and finish it off. It’s in pretty good condition. What’s likely needed: • Final plumbing / connections • Quick check over • Test run to make sure it’s working properly Nothing crazy — just someone who’s done this sort of thing before. You don’t have to be Hobart-certified, just: • Handy with commercial dishwashers or hospo equipment • Confident you can troubleshoot and get it running • Reliable and able to come onsite Dishwasher is already at the venue. Flexible on timing and happy to pay fairly for the right help. Chuck through your experience and availability and we’ll go from there 👍

Install rangehood. Drill it in above. BYO tools. Easy job. Husband just couldn’t do it on his own.

Move 7kg washing machine from old house in Broadmeadows to new house in Tullamarine. The property has one set of stairs Weighs approximately 65kg

Need the door seal replaced on the washing machine. Its a hi sense.

New washing machine.Im sure anyone who can read instructions can do it.Theres some bolts that need to come off the back of machine.Theres is a tool to do it with

Insatll washing machine i

I need a registered electrician to install a new freestanding electric oven at a residential property in Sunbury. Details: New oven: Technika freestanding electric oven, 54cm wide Old wall oven has already been removed Existing oven wiring is present but is approximately 3 metres away from the new oven location The cable will likely need to be re-routed under the wooden floor and brought up behind the new oven Scope of work: Inspect existing oven circuit and wiring Re-route existing cable to the new oven position Connect and install the freestanding oven Test and confirm safe operation Issue required electrical compliance / certificate This is installation only. Any required upgrades beyond the existing circuit must be discussed and approved before proceeding. I have provided clear photos of: Switchboard Existing wiring New oven Property is residential with good access. Please include: Confirmation you are a registered/licensed electrician What is included in your price

Builder built the laundry space too tight so my washer and dryer cannot be fitted into the space. Need to remove the current cabinet and sink. That should create enough space to fit the washer in. Also need help installing the washer (Samsung bespoke washing machine) and dryer (also Samsung bespoke dryer have a match stacking kit).

Moved into new home. Need a licensed plumber to install existing washing machine. Photos of job attached

I've got a 60cm slide out (Baumatic GEH6018) range hood installed in a cupboard above the stove. It's not in great condition anymore; I've purchased a new range hood (same model) hence need the old one removed and replaced with the new one I've purchased. A chippy or competent handyman who has previously worked with installing range hoods would be ideal for this task.

I need a licensed electrician to remove the old oven and install a new one, and also take away the old unit. The previous oven was 75cm wide and the new one is 60cm wide, so I also need two panels to fill the gaps on the left and right sides.

Hi, need to get a dishwasher installed. Never been one installed in this house. Attaching pics for reference. Please send your quotes.

I need to install wired cctv camera

Assemble Smith Machine – Garage Gym Setup (Sunbury VIC) I need someone experienced to assemble and install a Lifespan Fitness SM-25 6-in-1 Power Rack with Smith & Cable Machine in my garage. It’s a large multi-function unit with bench, barbell, and weight plates. Product link:https://www.lifespanfitness.com.au/products/sm-25-6-in-1-power-rack-with-smith-cable-machine-bn9-bench-100kg-olympic-weight-plate-barbell-package?currency=AUD&variant=40052176093242&utm_source=google&utm_medium=cpc&utm_campaign=Google%20Shopping&stkn=d0a69307f104&gad_source=1&gad_campaignid=17336126553&gbraid=0AAAAADw_rvRbFYZQumqKqSf_FRqd1aJIX&gclid=Cj0KCQjw0Y3HBhCxARIsAN7931Uq17q0AdbJ-FGkHhV9uvbC8VOmQxkxVwboUiskn_CJDCc3Evey6MkaAgUIEALw_wcB#&gid=1&pid=3 Details: - Must bring own tools and equipment - Experience with gym equipment assembly preferred - I can assist with lifting heavy parts if needed - Flexible with timing – ideally sometime this week Location: Sunbury, VIC Budget: Open to offers based on experience Please reach out with your quote and availability. Thanks!