Find professional window and door services in NSW

1) Install 2 clotheslines, same as what's shown in the picture onto timber lap and collar fence. 2) Existing man hole (no frame) to be finished with frame as shown in the pictures, or similar. 3)Solid core doors to laundry to be shaved (by approximately 10mm). Doors currently too thick to close flush. 4) Instal 10 dust boxes behind strike plates (no photo; but will provide).

Looking for someone to replace the flyscreen mesh on 2 screen doors and 2 window flyscreens. Location Rockdale, NSW, 2216 Frames are in good condition - only mesh needs replacement. Please include - new flyscreen mesh - spline if required - installation Flexible with timing on either Monday or Friday next week. Please quote including materials

Cut and install 5x solid core doors internal. I have the doors and hinges ready to go. House in wollongong

Door not sliding properly

Install internal door. Door already purchased. Need hinges and door handle installed.

“Adjust the sliding door panel so it moves smoothly along the track and closes fully without any gaps.

Need automatic garage door motor fitting to door.

I need a repair of the wooden front door architrave where the lock sits

Our wardrobe door is jammed, when we closed the door our drawer came out with lots of clothes which jammed the door and now we can't open it.

Need to remove a metal cover/cage around my outdoor AC unit on the balcony No need to remove the base plate, just enough to give access to the AC unit for repair. I need this done ASAP.

It looks like the wood frame of the door has deteriorated which may have caused the screws to become loose leading the latch breaking off of the frame. The photos show the door frame's wood at the bottom is breaking which is near where the latch has loosened and become unsecured. The top latch is still in place but it may break off too because there is more weight on it without the bottom latch. It is probably causing tearing on the frame.

Location Liverpool unit The security grill door need wheel replacement and the strip below need pop rivet as its loose

Hi, I need Flyscreen rollers replaced on 3x Flyscreen sliding doors. You will need to purchase the rollers as I am not sure which ones are required. There are 3 doors. Refer to photos.

Door became unhinged due to particleboard not able to hold in the screws. Will need some work to be able to hold the screws.

Handel on door is coming off... it's one with a lock... if not careful, can easily lock door when closing and can't get open... Handel is almost off and held on with tape

1x window fly screen replacement. Roll is already purchased. You can keep remainder.

- hang 1 x painting - hang 2 x wall sconce - repair cupboard door - repair curtain rod (pulled from wall)

Fix the door hinge so that the door fully closes

supply and install internal door to bathroom. Door will need to be planed approx 5mm from standard 720x2040x35 door. Existing door is 715. New hinge hardware and lockable passage set to supply and install.

The top screws in our bifold door are falling out, they may have lost their thread as it keeps happening. Need the issue fixed as the door is tough to close when they are loose!