Find professional window and door services in Canberra

3 doors out of their tracks 3 door handles loose , needs tightening

2 small tasks 1. Reattach screw to top of outdoor shade umbrella 2. Install new door handle. New parts already purchased

Sushi Musa Woden Shop front door hinge is stuck when opening and closing Address: Shop R03/9 Bradley St, Phillip ACT 2606

I require an experienced carpenter/handyman to address wear and tear on the bathroom closet door. The door hinge is broken and needs replacing or re-securing, and the door seals have come off from wear and tear and need to be properly re-attached/re-sealed. The repair must be fully completed by Friday, November 29th, 2025, for the final property handover inspection.

The sliding door is ajar and does not close properly.

Hi, I need someone to repair my sliding screen door. The mesh has come loose and torn along the side and bottom, and the frame no longer holds the mesh in place properly. It’s sagging, pulling out of the track, and won’t close or slide smoothly anymore. From the photos, you can see: • The mesh is frayed and detached on one full vertical side • The bottom section has come completely out of the frame • The sliding track alignment seems off • The frame may need re-tensioning or re-meshing I’m looking for someone who can: • Re-mesh the screen OR repair and re-fit the existing one if possible • Ensure it slides properly again • Do the job as cheaply as possible while still making it functional Please send me a quote after checking the photos. Happy to work around your availability. Thanks.

I need my existing back door taken off and replaced with a door with a medium/large dog door in it. I don’t have the door or dog door yet 😂 Please let me know how much it would cost for you to also supply these (bonus points if you use a secondhand door)

Double Sash windows cannot open and close easily. One is locked without Key and needs to be operable

New aluminium windows were put in for a renovation a few years back. They were never properly silicone sealed externally. The task is to seal the 20 external windows with white silicon. One seems to have a slightly larger gap ~10mm. Looking for a high quality finish as it will be quite visable

I took down two panels of the sliding shower door for cleaning and I need help to put them back. I am flexible with date and time.

we’ve had new windows installed but they are leaking!! Architraves are not sitting right up against the brick. We need someone who has confidence using a silicon gun and can apply silicon to the gap in between the architrave and the brick wall. It needs to be fully sealed and it needs to look professional. There are four windows. Three windows are 1000 x 2000. The fourth window is 4000 x 2000. The biggest issue is 2 of the windows have beds in front of them and so the mattresses and the bed frames will need to be taken out of the rooms first. Then put back into the rooms. No time wasters. I need someone who has experience in this kind of work. That close-up of the gap between the architrave and the brick is showing the smallest gap. There are much bigger gaps - up to 3mm. I need the exterior checked as well.

Purchase hinge and all supplies, install kitchen door and test functionality. Quote to include labour, travel, any supplies required, provision of any tools required and a final test to ensure it closes properly. Home owner to provide door but no hinges or screws.

I need someone to drill into my brick wall and install my ring doorbell. (It's battery, not wired). I have drilled 1 hole but unable to do the rest 3. Small and easy job for someone experienced hopefully

1. Remove sliding glass door replace or service rollers, clean sliding areas and make good. 2. Replace mesh on sliding mesh door. Replace in sliders and check functionality. 3. Ensure all working properly before leaving. 4. Glass door is heavy double glaze so will require two men to lift or experience doing so. Advice if you need help from home owner. 5. One Glass sliding door and sliding mesh door to be serviced. 6. Supply all materials and cleaning supplies.

Replace the flyscreen mesh on one sliding door and one window. Flexible with time but the earlier the better.

I have 3 fixes to be done 1. Fix cabinet door, new a new hinge and install it 2. Fix broken drawer 3. Flooring need to be fixed

My dog has chewed the window frame (2x areas) need this fixed up as if it hasn’t happened. Sanded, bogged and repainted at a guess?

My automatic garage door not opens fully up and not close properly. When pressing the close button on the remote, the door starts rolling down but then the roller wheel misaligns when coming down and sit outside the track. It looks like the issue is coming from the left corner roller area, which may be due to misaligned. The corner panel also appears slightly misshaped, likely causing the door to bind. Please see the attached photo for reference. Work required: Inspect the corner roller and alignment. Adjust or replace the roller if necessary. Check and realign the corner panel. Ensure smooth and safe operation of the door after repair.

Door is off hinges so needs to be realigned and a lock needs to be put back on the door. Have the lock but missing the screws so a handyman who can bring screws with them is preferred

Need someone to reattach door to tracks.