Hire a reliable projector installation service in Central London

To install a projector screen onto wall. Should take no more than 45 minutes

4 small shelves fixing to wall A mirror fixing to the wall A pull down projector screen fixing to the ceiling

I have attached the wardrobe and need the door added in. The sliding door mechanism had gotten loose so for safety reasons the door was removed. Also have attached projector screen I bought and the expansion hooks received (to mount into ceiling). I do not have assembler instructions for the wardrobe as it was assembled my company I purchased from.

I need a projector mounted on the ceiling and power cable hidden with trunking

Can’t connect the AV (Yamaha) to the JVC projector. Looks like the HDMI cable is damaged so a new cable needs to be run through (I think)

I am looking to get a Certified Electrician to install my projector in my ceiling and move and hide some cables. It's not the biggest job as I already have the projector (BenQ W2720i:) and the screen (ABIS 100 inch electric screen) and the projector mount (B-Tech BT899 Projector Ceiling Mount). The screen is mounted, but the projector isn't. The job would be to: - Drill into the ceiling and mount the projector According to chat gpt, I should be aiming for 2m50 throw, and given the top of my projector screen will be 17-20cm from the ceiling, it is suggesting the best would be a drop of 10 to 13cm drop. The mount it was suggesting is this one: B-Tech BT899 Projector Ceiling Mount with Micro Adjustment (Max. 25kg) (12.2cm drop) - There is an electric wire to an existing lamp (the wiring is hidden in a white trunking). Ideally if you could split the wire from the light switch on the wall, making it two switches, one for the projector, the other for the lamp, hide those two wires together in an electrical mount that would also fit the HDMI cable (Maybe a wide mount that can maintain 5cm between the electrical cables and the HDMI cable to avoid interference?) I already have the 10m hdmi cable that then also needs to be hidden in a trunking a little further along so it can reach the soundbar. - Extend the lighting cable along the ceiling a bit (a little more than a foot), so we can move the lamp (the lamp is currently in the way of where the projector will go). Of course if there are neater or better ways to do any of these things I would be very open to them! I have attached some pretty terrible photos (sorry currently abroad for work or would have take something clearer!) which shows where the cables should run . Again sorry it’s fingers scribbled on my phone! The 200 pounds would be just for the labor, I will pay for electrical cable / trunking / screws.

Hi, I need someone experienced with projectors to help me properly align my XGIMI Horizon Pro projector with my Duronic projector screen. The projector has auto-keystone and auto-alignment features, but no matter what I do, the image doesn’t fit correctly onto the screen — it’s skewed/off-centre and the corners don’t line up. I need someone who understands projector positioning, keystone, lens alignment, and screen geometry and can get it set up cleanly. This should be a quick job for someone who knows what they’re doing — likely just adjusting the placement, angle, height, and fine-tuning the settings. What I need you to do: Check projector placement and adjust height/angle Align the image perfectly within the borders of the screen Adjust keystone, focus, or any other settings needed Make sure the final picture fits the screen evenly with clean edges No major installation required — I just need the alignment fixed. Looking for someone affordable, ideally a handyman or AV-savvy tech. When: As soon as possible — flexible on time. Please reply with: Your experience (even basic projector/AV setup is fine) Your price/rate When you can come Thanks!

It is a projector screen aboit 80inch, I dont need help carrying it, i will load and unload myself.

I have a projector screen that needs installing to the wall/ceiling. Need help with the install and a little wiring to extend the power cable, nothing too complex. 1-2 hr job max.

I need someone to put up my wall projector it electric and very long and large possibly heavy in my bedroom

I have a large projector screen I would like installed in my flat for use as part of a home cinema.

We over pulled the screen projector and now it’s not going up.

We need a projector mounted on our ceiling, the model is EH-TW7000

need to install the projector and two speakers in a white space

Hello, our projector doesn’t work anymore. When turning it on, the light for the lamp is blinking red and the light next to the power button is on red. The lamp lights up, and you can hear the ventilation, I am not sure what is going on here but guess either the ventilator needs replacement or the lamp. Obviously if the lamp needs replacement we will buy the item, but would still require help exchanging it.

Mount projector stand to the attached wall. It’s a metal sheet, we have the stand just need the holes drilled

Hey! We’re replacing the projector in our room – it uses a standard mount, and the new one just needs to be mounted back in place. It’s the same model, so it should fit the existing mount. Would be great to get it sorted ASAP!

Install a recessed ceiling-mounted projector screen in a living room false ceiling and hide all cables inside the wall. The wall is plasterboard. The screen is electric, and cables need to be routed cleanly. Please bring the necessary tools and materials for a neat finish, including patching and tidying up the wall after cables are hidden

Hi there, I’m looking for someone to install a projector on the ceiling. The projector and ceiling mount are already on hand – I just need help with securely mounting it and making sure it’s aligned properly. Ideally, you’ll have experience with AV setups or similar installations. Please bring any tools needed (drill, ladder, etc.). Let me know if you have any questions or need more details! Thanks!

Hi there, I’m looking for someone to install a projector on the ceiling. The projector and ceiling mount are already on hand – I just need help with securely mounting it and making sure it’s aligned properly. Ideally, you’ll have experience with AV setups or similar installations. Please bring any tools needed (drill, ladder, etc.). Let me know if you have any questions or need more details! Thanks!