Hire a reliable projector installation service in London

Mid viewing, Epsom EF-12 projector stopped connecting to my Sony UHD Blu-ray player. Need someone with experience troubleshooting projector connections to fix asap.

Need projector screen mounted to ceiling, ceiling is plasterboard so may require toggle bolts

Can’t connect the AV (Yamaha) to the JVC projector. Looks like the HDMI cable is damaged so a new cable needs to be run through (I think)

I am looking to get a Certified Electrician to install my projector in my ceiling and move and hide some cables. It's not the biggest job as I already have the projector (BenQ W2720i:) and the screen (ABIS 100 inch electric screen) and the projector mount (B-Tech BT899 Projector Ceiling Mount). The screen is mounted, but the projector isn't. The job would be to: - Drill into the ceiling and mount the projector According to chat gpt, I should be aiming for 2m50 throw, and given the top of my projector screen will be 17-20cm from the ceiling, it is suggesting the best would be a drop of 10 to 13cm drop. The mount it was suggesting is this one: B-Tech BT899 Projector Ceiling Mount with Micro Adjustment (Max. 25kg) (12.2cm drop) - There is an electric wire to an existing lamp (the wiring is hidden in a white trunking). Ideally if you could split the wire from the light switch on the wall, making it two switches, one for the projector, the other for the lamp, hide those two wires together in an electrical mount that would also fit the HDMI cable (Maybe a wide mount that can maintain 5cm between the electrical cables and the HDMI cable to avoid interference?) I already have the 10m hdmi cable that then also needs to be hidden in a trunking a little further along so it can reach the soundbar. - Extend the lighting cable along the ceiling a bit (a little more than a foot), so we can move the lamp (the lamp is currently in the way of where the projector will go). Of course if there are neater or better ways to do any of these things I would be very open to them! I have attached some pretty terrible photos (sorry currently abroad for work or would have take something clearer!) which shows where the cables should run . Again sorry it’s fingers scribbled on my phone! The 200 pounds would be just for the labor, I will pay for electrical cable / trunking / screws.

Hi, I need someone experienced with projectors to help me properly align my XGIMI Horizon Pro projector with my Duronic projector screen. The projector has auto-keystone and auto-alignment features, but no matter what I do, the image doesn’t fit correctly onto the screen — it’s skewed/off-centre and the corners don’t line up. I need someone who understands projector positioning, keystone, lens alignment, and screen geometry and can get it set up cleanly. This should be a quick job for someone who knows what they’re doing — likely just adjusting the placement, angle, height, and fine-tuning the settings. What I need you to do: Check projector placement and adjust height/angle Align the image perfectly within the borders of the screen Adjust keystone, focus, or any other settings needed Make sure the final picture fits the screen evenly with clean edges No major installation required — I just need the alignment fixed. Looking for someone affordable, ideally a handyman or AV-savvy tech. When: As soon as possible — flexible on time. Please reply with: Your experience (even basic projector/AV setup is fine) Your price/rate When you can come Thanks!

It is a projector screen aboit 80inch, I dont need help carrying it, i will load and unload myself.

I have a projector screen that needs installing to the wall/ceiling. Need help with the install and a little wiring to extend the power cable, nothing too complex. 1-2 hr job max.

I need someone to put up my wall projector it electric and very long and large possibly heavy in my bedroom

I have a large projector screen I would like installed in my flat for use as part of a home cinema.

Need a projector installed to the ceiling using a mount and all connections made and set up so everything is working

Two brackets to be installed on dry wall (brackets supplied) , brackets suited for weight of projector screen (18kg. Projector screen to be hung on brackets.

**Updated Listing** I’ve purchased a Duronic 100″ 16:9 fixed-frame projector screen and a ceiling mount for a BenQ TH685P projector. Both kits come with all required parts. The job is to: – Assemble the Duronic screen frame (flat-pack style, with included parts). – Stretch and attach the fabric with springs (instructions provided). – Drill and secure the screen wall brackets, then hang the frame. – Ceiling-mount the BenQ TH685P using its mount (into joists or heavy-duty anchors — not plasterboard alone). ⚠️ Precision requirements (non-negotiable): – Screen must be perfectly level – Projector lens must line up with the centre of the screen horizontally. – Lens-to-screen throw distance must be measured correctly – Lens must sit about 2–3 inches above the top of the screen’s white area when ceiling mounted. I’ll be present to guide exact placement, but this job cannot be done by eye — it requires a level and tape measure before any drilling. Must use a spirit level! Notes: – Care is needed handling the white screen fabric (clean hands, no tools touching the surface). – Safety cable on the projector mount must be attached. – Should take around 2 hours with proper tools (drill, level, ladder)

We over pulled the screen projector and now it’s not going up.

We require seven different wall lamps to be fitted, a 80" TV to be wall mounted, a large mirror to be wall mounted and a projector screen to be fittted to the ceiling.

I have the items I need to install the projector I just need someone to set it up

Want someone to help me drill my projector stand in the wall.

We need a projector mounted on our ceiling, the model is EH-TW7000

Hang a projector screen on the ceiling of the ground floor living room. Outlet is on the wall above the radiator, will consider an extension lead if needed. No need to hide the wires in the wall, I am fine with trunking. The details for the screen i am using are below: DBZ brand partner - Living and Home 100" White Crossbar Wall Mounted Electric Motorized Projector Screen with Remote 16:9

need to install the projector and two speakers in a white space

Hello, our projector doesn’t work anymore. When turning it on, the light for the lamp is blinking red and the light next to the power button is on red. The lamp lights up, and you can hear the ventilation, I am not sure what is going on here but guess either the ventilator needs replacement or the lamp. Obviously if the lamp needs replacement we will buy the item, but would still require help exchanging it.