Hire a trusted wall mounting service near you

First, gather the picture or pictures you want to display. Get a hammer, pencil, and measuring tape. For plaster or drywall surfaces, you’ll need small nails (lightweight pieces), picture hangers (medium-weight pieces), or wall plugs and screws (heavier pieces). For tile or glass, use adhesive hooks or brick clamps. Then, centre the picture or arrangement 145 centimetres from the ground. Alternatively, you can ask a handyman Tasker to hang the images for you.

To hang lights on a brick wall, start by drilling holes into the wall. Put wall plugs through the holes, then attach cup hooks onto them. You can then hang the lights across your brick wall. For a less damaging alternative, you can use detachable brick clips or glue each light to the wall with a hot glue gun.

Use a stud finder to locate wall studs in your desired area. Mark the holes and use a spirit level to ensure the bracket hangs straight. Then, drill the holes and position the bracket. Once the bracket is in place, attach the mounting plate to your TV. You can do this by locating the mounting plate attachment holes at the back. Once the TV is secure, lift it onto the bracket. Secure it in place following the manufacturer’s instructions.

Wall mounting a curved TV is similar to how it’s done for any other TV. You’ll need to drill holes, position the bracket, attach the wall mount to the TV, and lift the device onto the bracket. The only difference is that you’ll need to find a mount that’s specialised for curved TVs. You can consult your local appliance centre or see if your manufacturer has TV mounts for your model.

There are many ways to do this. You can run the wires behind the wall using a power kit, use a cable concealer kit, or use trunking and skirting board accessories. These items are usually quite affordable and easy to install, though it will involve some DIY work. You can also have this done quickly by booking a TV mounting professional via Airtasker. Just add this request to your task post.

First, unplug all the wires. Unlock your TV mount’s safety mechanism, then tilt and lift it out of the bracket. Have a partner help you with the heavy lifting, then place the TV face-down on a soft surface. Next, unscrew the mount from the TV and detach the bracket from the wall. You can opt to fill and paint the wall afterwards to cover the holes you drilled in.

As a general rule, the strength of an anchor depends on three factors. Consider the object being hung, the type of surface it’s installed in, and the type of anchor being used. Plastic anchors can handle light loads of around 13 kg - suitable for towel bars, toilet paper holders, large mirrors, or pictures. Threaded plasterboard toggles can handle heavier items (approx. 18 kg). Lastly, hollow wall anchors and toggles can take on loads of up to 22 kg.

There are lots of creative ways to do this. You can use adhesive hooks, decorative tape, drawing pins, putty, or magnetic paint. For pictures, consider using a wire display or a cute clothesline with decorative pins - velcro, masking, or packaging tape also create minimal damage to walls. You can also book a wall mounting Tasker to enquire about other options for your mounting needs.