Find experienced vinyl flooring contractors near you

I have approximately 100sqm of floor, it is all the ground floor of my house. I would like lay LVT flooring; glue down in herringbone style. I will supply all materials.

Looking for someone who can fit 65 sqm herringbone floor.

To lay LVT Herringbone flooring in front, two bedrooms and a small hallway.

A portion of this vinyl floor got burnt. I need it repaired.

LVT replacement in bathroom- 4m2 (vinyl bought). Job doesn’t include glue/sealant. Must be fitted.

a coffee table has damaged 4 tiles on our vinyl floor, we ideally would like the 4 effected tiles to be removed and replaced

Install peel and stick vinyl wooden effect planks in a downstairs toilet. Planks need to be cut to length and cut to fit around toilet, sink and pipe work

I’m looking for an experienced sheet vinyl installer to finish a parquet‑effect vinyl job I started… and then utterly messed up during the stencil cutting stage. I have managed to save most of it but, rather than make a bigger mess, I’d like a pro to finish. What needs doing: - Lay a 1.3m x 0.5 section of sheet vinyl and double cut with current edge and match pattern. - Fix 3 small areas where pieces need double cutting and matching. Looking for: Someone confident with sheet vinyl, double‑cut seams, and pattern matching — especially parquet designs. I have loads of offcuts that easily cover required area with needed pattern.

I need someone to lay a 2x2m vinyl floor in the bathroom. I’ve got the flooring and adhesive. I had a go myself but don’t have the necessary tools skills or patients for it.

Laying vinyl kitchen flooring

I have an LVT click floor that was installed three months ago. The floor was not properly levelled. One of the floorboards has now cracked, and there are three small areas where the floor is particularly not level and I fear more cracking. I would like to, if I can, level these sections without changing the entire floor.

1. Move wahing machine, fridge and table in order to lay vinyl flooring

I need vinyl to match the grey laminate flooring done in the passage. You can use off cuts I don’t mind as long as it is done neatly. You would need to provide the vinyl flooring. The area will be cleared and prepped of course. Thank you

Small bathroom floor area - 200 cm by 140 cm, need to install vinyl sheet. Adhesive and sheet provided.

Lay bathroom vinyl flooring 2x3 meter roll

Install of 18.5 sq m of vinyl plank flooring - https://www.floorsforpaws.com/pawsafe/pawsafe-domestic-range (Coco style) on 5th March Flooring plywood is already in place and all flooring substrates required (screenshot) are on site, instructions from supplier on method of install: A lot of our fitters use  Ardex feather finish to ensure then don’t ghost through over time. Apply once in plyboard joins, allow to dry and then apply again to ensure the joins are completely level with the plyboard. The planks/tiles can be cut with a Stanley knife (hook or straight blade).  Follow the instructions on the adhesive, you need a A2 Trowel you need the trowel at 60 degrees, apply a thin layer, butt each tile up to the others Use a P131 primer over the plyboard and when dry use FBall F48 adhesive to adhere the planks. The PawSafe domestic flooring needs to be laid into wet acrylic adhesive.  Do not let the adhesive go tacky.

I want some one to help me fix vinyl in my house is a four bedroom, Passage, stairs and entrance.

Screeding and glue down LVT flooring installation in kitchen (14sqm) Will supply flooring and adhesive, primer and self levelling compound

Kitchen flooring, vinyl clip in floors. Very small kitchen

Hi, I need a floor fitter/ vinyl layer to lay some sheet vinyl flooring in my bathroom. (Please only offer woth experience) Im a tradesmen myself, just flooring is not my area! Existing flooring is vinyl, laying straight ontop with 4mm loose lay vinyl. Ideally need done Saturday 25th. I have the flooring. Thanks