Find a fence installation professional near you

Remove wooden fence and insert panels round the edge of front garden

Two rotted 4x4 fence posts have snapped at the base. They were set in concrete, which will need replacing. The panels are damaged but salvageable. Needs to be done sooner rather than later, as the wind may cause further damage.

Currently 2320mm gate, to be replaced by a single Close-board Featheredge Fence Panel & 2 x 800mm gates. Both gates are already at the location and available. I'd like a no-obligation, free estimate, please. Required materials are as follows: · 1 x Single Heavy Duty Close-board Featheredge Fence Panel. · 4 x Fence Panel Fixing Clip 50mm · 1 x Concrete Post · 1 x Post Mix · 1 x 150mm Gravel-board (possibly) · Labour\Installation Please confirm the materials and labour costs individually. Can you also quote separately for "Cant Rails" and "Feather Edge Panels" to match the height and width of the 6 ft x 6 ft Single Heavy Duty Close-board Fence Panel. Single fence panel to be fixed from the green wheelie bin end, two gates to go to the house wall end. I will clear away all waste material from the existing gate. Open to a reasonable estimate. Thank You

I need a back yard gate built and fitted. Current one is rotten and falling off

Single Closeboard Fence Panel Single Concrete Post Single 150mm Gravelboard 4 x Fence Panel Fixing Clips 1 x Bag of concrete post mix Closeboard fence panel will go from the green wheel bin side, concrete post will about where the rabbit hutch is,, two RED marker on the image on the gate and floor slab.where concrete post need to be installed. Please Qoute for material individually and installation/labour price separately please, appreciate your time and effort Thank You

My old child gate has broken , need help to install a new one as I am useless at anything DIY

It is very easy it is simply to install a child gate ,bought a new one the old one has broken

I need someone to: - remove current fence post - put some cement down - install new fence post - reattach the two fence posts attached to it

Remove a large fence panel covered in ivy and replace with a new fence panel

6 wooden fence panels and posts need replacing - wear and tear. I have added photos of the panels in question they aren’t the tall panels (4-5ft) with gravel board… to match the tall pair pictured by the patio.

Hi, I need a fence/ boundary built between mine and my neighbours front garden, it needs to be dividing the front garden from next door, my side is the grass bit

3 new fence panels (6ft x 5ft each) to be put in place. Have bought the materials already - fence posts, gravel boards, lap fence panels, u hooks, and ready mixed concrete.

Hi, I'm looking for someone to install a wooden fence for me. I already have the fence panels and the posts. Two of the posts are already installed securely using Postcrete, and there's two more left to be done, and the fence panels then need to be attached to the posts, either by drilling/screwing them in or using another suitable method you'd recommend. I've tried doing it myselt but I'm struggling with drilling into the panels/posts, so I'd prefer someone experienced to complete the installation properly. Please let me know if this is something you can help with and your approximate price. Thanks!

I cant put up a baby gate myaelf as it is too difficult. Perhaps need a masonry drill?

I have put £10 as not sure what price would be please attach price to do the job We have a small wall on our drive that is level ground on our detached neighbour and we want a fence building similiar to the photo I have provided We also have some fence panels at the front of the house we want changing Not sure on price so hoping to be quoted a price and also I have attached first 2 images that are now and the second 2 what we want it to look like

Looking for a handyman or carpenter to replace a rotted wooden gate post and re-hang an existing metal garden gate. Job Scope: Remove the existing rotted wooden post anchored to the concrete wall pillar. Supply and install a new treated timber gate post (approx. 33 inches / 84 cm long, 5 inches wide). Securely fix the new post into the wall/ground structure. Re-attach/re-mount the metal gate onto the new timber post using existing or new heavy-duty metal hinge brackets. Ensure gate swings freely and latches properly. Requirements: Must bring suitable tools, fixings, and materials (or state in offer if timber post needs to be supplied). Experience with timber, masonry fixings, and exterior gate installation.

Looking for an experienced handyman or fencer to install a new rear garden fence and gate in a small back garden in Ealing. All materials will be supplied by me, so this is labour only. I will double check with you which materials are needed before ordering so everything is approved by you. New fence layout across the rear boundary will be: 1800mm panel 1800mm panel 900mm gate 1800mm panel Job includes digging post holes, setting posts securely in concrete, installing fence panels, hanging and aligning the gate properly, fitting hinges/latch, and making sure everything is straight, level, secure and left tidy afterwards. There is garden access and electricity available. Materials are expected to arrive Thursday next week, so looking for someone available shortly after.

I need two wooden fence panels replacing. I already have the panels, wooden posts and postcrete. I’ll just need someone to install the fence.

Fix fence, damaged due to wind and also build a gate that leads into the forest from garden Measurements for the gate are approximately width: 120cm height: 200 I have no materials