Find a professional verandah installer in West Melbourne

I have a verandah with about 12 sheets of polycarbonate and 7 of wooden lattice. I need the whole lot replaced with new polycarbonate. Where it replaces the lattice, it will need to have a gutter added and connection to stormwater system. Must be done by a licensed plumber. The section of the verandah that just needs the sheeting replaced is approximately 9m long x 1.5m wide. The section that currently has lattice and no guttering is 6m x 2.5m. This will not only need polycarbonate sheeting but will need guttering too. - Please do not quote unless you are a licensed plumber. Victorian regulations require anything connected to the stormwater system to be done by a licensed plumber. Due date: Flexible

flat roof verandah with a raised V in center with wooden posts - Due date: Flexible

We had a broken ceiling at our verandah, after we checked the roof, we found out that there is a damaged to the roof that cause the water got in to the ceiling, - Due date: Flexible

Want to build a verandah approximate size 6x6 m - Due date: Flexible

Damaged porch. Needs timber replaced. Please see photos. Strip at the top of the timber nees replacing however we would like entire piece of timber replaced and time stained as well. Phone numbers contact details to be provided upon confirmation. - Due date: Flexible

Replace 4 veranda posts onto brackets in cement foundation - Due date: Flexible

We require a halfbrick wall to be built for an existing verandah. This work is for a disabled pensioner. We have the bricks to be used and this wall will be rendered once finished. - Due date: Before Wednesday, 30 November 2022

Looking for a handyman to install metal lacework on the front verandah - front and returns. Will need own tools and ladder. Measurements: Section 1: 141 CM (L) Section 2: 347 CM (L) Returns: 108 CM (L) Pillar Height: 256 CM Would love it installed sometime this week. House is located in Kingsville. Unsure how much this stuff costs so please provide a quote. It's a pretty simple job from what I can see. - Due date: Flexible

Elevate veradah roofing beam to stop it leaking and replace laserlite sheeting - Due date: Flexible

I'm looking to swap out the solid panels for some clear panels in order to let more light into my house. Basically replication the right side. See attached pictures I have the panels & can supply tools and offer assistance with the install. I don't have equipment for working on the roof.

Remove and install new weatherboards Remove and install 2 new verandah posts Install new verandah roof lining New window trim Other small jobs - Due date: Before Sunday, 18 September 2022

Require a Roof Plumber to; -replace existing zinc verandah tin measurements below. -regrade verandah gutters and add additional brackets x 8 -fix grade on small gutter section on house front right -block an existing downpipe outlet on right -connect 90mm downpipes to 1 outlet on left -remove and take away old materials and rubbish Materials needed Zinc Tin Main Face 1525mm long x 10 Sheets Zinc Tin Sides 1525mm long x 3 sheets Ridge Capping 2100mm x 2 Main Face Apron Flashing 6000mm - Profile 50mm high max along top edge if possible Side Apron Flashing 1600mm replace old lead flashing with flexible equivalent Replace 70mm pop with new 90mm pop Connect and supply new 90mm downpipe to existing downpipe on left side in Colorbond Nightsky 8 x Gutter Brackets in Colorbond Nightsky Easy access from the street. Please price supply of materials, labor & removal of old tin. - Due date: Before Wednesday, 31 August 2022

Person would need to have drawings for council plus construction drawings.

-6000 x 1500 deck needed to be built for verandah -Jarrah flooring to be use (thin) -Site super accessible, you can drive straight to the deck if needed - Secret nail to be use for install - Due date: Flexible

Needing Front Verandah Rails done in Colorbond steel Verandah Size roughly is 2x2 And has 2 Steps going down. For a Pensioner Thanks in Advance - Due date: Flexible

Built Pergola/ Verandah 8m x 3m. All materials supplied.

Granny flat verandah has been extended & the roof needs to be completed. Some materials can hopefully be reused, verandah is about 4m2.

Official Quote & commitment (estimated date of start/end) to Build a Flyover double sloping Verandah 5x6.3m, according spec. BUILDING PERMIT - APPROVED!! This task is just to meet and properly QUOTE and decide the work together. QUOTEs in next couple of weeks, work to start in next couple of months. QUOTE is for material+build+everything.. happy to discuss options. Pictures of my backyard: https://photos.app.goo.gl/ZKtauhULUqAPMEyR6 QUOTE ONLY FOR NOW: quote to include everything: Labor + Materials + etc. Design is in the picture, i will evaluate credentials, previous works done, suggestions, feedback, and price. I want a great quality lasting work, i will evaluate also price vs quality! thank you! state/send your reference/pictures of previous job, suggested materials, quote to build the verandah and feel free to ask me any clarification

Carpentry job. We need to replace the existing boards on the verandah. The current boards are water damaged at the bottom. It is approx 4.4m long. (Photo attached) We also need a board replaced or covered with a new board (only the top board) at the end of our backyard verandah, due to damage. Is is 1.4 meters long (photos attached)

Pre existing verandah requires 3 braces to attach verandah to roof in order to obtain a s137B - Due date: Needs to be done on Wednesday, 13 April 2022