Find a professional balustrading contractor in South West Sydney

We’ve recently moved into our home, and require a higher balustrade on the second floor of the house, or anything that can potentially act as a higher barrier from children jumping or climbing up.

Hi I’m looking for a company that specialises in glass balustrades. I would like to put one up on our outdoor patio area. If we could get a measure and quote that would be great. I would like a frameless one like the image if possible. Please let me know your thoughts/if it would work in this space due to all the columns holding the patio up. Thankyou

The staircase is currently painted but flaky and needs a re fresh in a different collour

Paint stairs balustrade for two storey house 15 stairs plus upstairs

Balustrade - We required the top space - 820*840 Staircase- 17*20 mm

The wrong timber was used by the previous owner and is deteriorating. The posts are fine just rails and pickets need replacing. I’ve attached a plan and the existing photos and example of what we are after.

Timber handrail already installed. Need a carpenter to install the balustrades vertically from the bottom of the stair landing to underside of the handrail. I have all the timber needed - Due date: Flexible

Supply, install glass Balustrade around pool spa area. 10.3m with 2 gates - Due date: Before Thursday, 31 August 2023

White post sourced and installed into my stair balustrade - Due date: Flexible

Replace missing balustrade post with an identical one. I need you to source or make the post. Painting not required - Due date: Flexible

Glass balustrade for decking

We need balustrade installed for front door step, from bottom to the first step, and also include the podium gap on two sides. - Due date: Flexible

Aluminium Installation and cutting to size for front patio - Due date: Flexible

Supply and Install glass balustrade on front house balcony - Due date: Flexible

I need Balustrade glass for stairs and balcony - Due date: Flexible

Re install and fix off existing four piece Balustrade to re tiled balcony. - Due date: Flexible

Hi I want someone to do an internal balustrade, approx length 3.6m in a straight line as per photos of existing and what I would like is something similar or same as per the photo I have attached. Let me know if it can be done and estimated cost in writing rather than offer as we will need to talk about the detail and that will change things and then you can make an offer as it might be easier

Supply and install 12mm thick frameless glass balustrade panels toughened and heat soaked safety glass with polished edges and complies with Australian Standards. These will be installed to balcony with floor mount spigots Panel sizes 700mm wide x 970mm heigh with 2 square spigots 1550 x 970mm heigh with 3 square spigots 1700 x 970mm heigh with 3 square spigots 600 x 970mm heigh with 2 square spigots Then install a square top rail fixed both sides for each panel and allow for one 90 degree corner connector for the top rail Also we will need to apply frosting film to all 4 panels Thanks

Need about 5 metres of frameless balustrades installed for a verandah. I already have all the materials needs.

I would like remove the current design and have glass balustrade installed